HWM MAN-147-0003-D Water Leak Detector Instruction Manual
- June 1, 2024
- HWM
Table of Contents
HWM MAN-147-0003-D Water Leak Detector
Specifications
- Manufacturer: HWM-Water Ltd
- Model Number: MAN-147-0003-D
- Wireless Frequencies: 700 MHz, 800 MHz, 850 MHz, 900 MHz, 1700 MHz, 1800 MHz, 1900 MHz, 2100 MHz
- Maximum Wireless Output Power: less than 2.25W
Product Information
- This equipment uses a high-strength magnet and should not be carried by or placed in the proximity of anyone with a heart pacemaker.
- The magnet can permanently corrupt magnetic storage media like floppy discs, hard discs, tapes, etc.
- It can also damage TV and PC monitor screens and some watches.
- When disposing of the equipment or its batteries, it must be done responsibly according to applicable regulations.
- Do not dispose of Waste Electrical and Electronic Equipment or batteries as normal domestic waste; they must be taken to a designated waste collection point for safe handling and recycling.
- The wireless features of this product operate in specific frequency bands and have a maximum output power of less than 2.25W.
Only antennas supplied by HWM should be used with this product.
Usage Instructions
Safety
- Avoid carrying the equipment if you have a heart pacemaker.
- Keep the equipment away from magnetic storage media, TV, PC monitor screens, and watches.
Disposal and Recycling
When disposing of the equipment or its batteries:
- Ensure compliance with applicable regulations.
- Take them to a separate waste collection point for safe handling and recycling.
Wireless Features
- Operate within the specified frequency bands.
- Use only antennas supplied by HWM with this product.
FAQ
- Q: Can I carry the equipment if I have a heart pacemaker?
- A: No, it is not safe to carry the equipment if you have a heart pacemaker due to its high-strength magnet.
- Q: How should I dispose of the equipment or its batteries?
- A: Dispose of them responsibly according to applicable regulations. Do not treat them as normal domestic waste; take them to a designated waste collection point for safe handling and recycling.
IMPORTANT SAFETY NOTE
- This equipment uses a high-strength magnet and should not be carried by or placed in the proximity of anyone with a heart pacemaker.
- This magnet can permanently corrupt magnetic storage media such as floppy discs, hard disc tapes etc… It can also damage TV and PC monitor screens and some watches.
- Carefully read the information in this document and on the packaging before using the product. Retain all documentation for future reference.
SAFETY
- Refer to the “Important Safety Note” at the start of this document, regarding Heart Pacemakers.
- Contains a Lithium battery. Fire, explosion and severe burn hazards. Do not recharge, crush, disassemble, heat above 100 °C, incinerate, or expose contents to water.
- CHOKING HAZARD – Contains small parts. Keep out of the reach of small children.
- Designed for outdoor use in areas that may become flooded resulting in the equipment becoming soiled. Wear appropriate protective clothing when installing or removing the product from the installation site. Protective clothing is also required when cleaning the equipment.
- Do not disassemble or modify the equipment, except where detailed instructions are given in the user manual; Follow the instructions within the user manual. The equipment contains a seal to protect against water and moisture ingress. Water ingress may cause damage to equipment, including a risk of explosion.
Use and Handling
- The equipment contains sensitive parts that can be damaged by incorrect handling. Do not throw or drop the equipment or subject it to mechanical shock. When transporting in a vehicle, ensure the devices are secured and adequately cushioned, so they cannot fall and so that no damage can occur.
- No user-serviceable parts inside, unless details are given in the user manual. Follow the instructions in the user guide. The equipment must only be serviced or disassembled by the manufacturer or its authorised repair centre.
- The equipment is powered by an internal battery which may present a risk of fire or chemical burn if the equipment is mistreated. Do not disassemble, heat above 100 °C, or incinerate.
- Where an external battery is supplied, this also may present a risk of fire or chemical burn if the equipment is mistreated. Do not disassemble, heat above 100 °C, or incinerate.
- Normal operating temperature: -20°C to +60°C. Do not be exposed to direct sunlight for prolonged periods. Do not mount on apparatus that can exceed this temperature range. Do not store above 30°C for prolonged periods.
- The antenna must be attached to the unit before use.
- Align the antenna connector and rotate the outer nut clockwise until it is finger-tip tight. Do not over-tighten.
- To prevent damage, put the logger into deep sleep (storage) mode before disconnecting the antenna. Refer to the user guide for instructions.
- When carrying the equipment, hold it by its main body or carrying handle. Carrying the equipment by using attached cables or tubes can cause permanent damage and is not covered by warranty.
- Store unused loggers in the original packaging. The equipment can become damaged by applying heavy loads or forces to it.
- The equipment may be cleaned by use of a soft cloth lightly moistened with a mild cleaning fluid (e.g. a diluted domestic dish-washing liquid). A disinfectant solution may be used to sanitise if required (e.g. a diluted domestic disinfectant). For heavy soiling, gently remove debris with a brush (e.g. a domestic dishwashing tool, or similar). Ensure all connection points have a water-tight cover attached during cleaning, to prevent water ingress. When the connectors are not in use, keep the inside of the connectors clean. Do not allow liquid, moisture, or small particles to enter the equipment or connector. Do not pressure-wash as it may damage the equipment.
Radiation Exposure Statement
- This equipment contains a radio transmitter and receiver. Use of antennas and accessories not authorised by HWM may void the compliance of the product and may result in RF exposures beyond the safety limits established for this equipment.
- When installing and using this product, maintain a 20 cm (or greater) distance between the antenna and the head or body of the user or nearby persons. The attached antenna must not be touched during transmitter operation.
Battery – Caution Points.
- The equipment contains a non-rechargeable Lithium Thionyl Chloride battery. Do not attempt to recharge the battery.
- Where an external battery is supplied, this also contains a non-rechargeable Lithium Thionyl Chloride battery. Do not attempt to recharge the battery.
- In the event of damage to the battery or the equipment, do not handle it without appropriate protective clothing.
- Do not attempt to open, crush, heat or set fire to the battery.
- In the event of damage to the battery or equipment, ensure there is no risk of short-circuit whilst handling or shipping. Pack with non-conductive materials that give suitable protection. Refer to sections Waste Electrical and Electronic Equipment and Battery Directive.
- If the battery fluid leaks, stop using the product immediately. If the battery fluid gets onto your clothes, skin, or eyes then rinse the affected area with water and consult a doctor. The fluid can cause injury and blindness.
- Always dispose of batteries under local laws or requirements.
Battery – Lifetime
- The battery is single-use (not rechargeable).
- Do not store above 30 °C for prolonged periods, as this will reduce the life of the battery.
- The lifetime of the battery is limited. The equipment is designed to minimise power use from the battery, but this can vary according to the specific tasks it is given, its installation conditions and the operation of any 3rd-party equipment it communicates with.
- The equipment may re-attempt certain tasks (e.g. communication) if required, which decreases battery life. Ensure the equipment is installed correctly to maximise its battery life.
- Where the equipment has a facility to provide additional power, only batteries and/or parts supplied for the equipment by HWM should be used.
Waste Electrical and Electronic Equipment and the Battery Directive
Disposal and recycling: When the equipment or its batteries reach the end of their useful life, they must be disposed of responsibly, according to any applicable country or municipal regulations. Do not dispose of Waste Electrical and Electronic Equipment or batteries as normal domestic waste; they must be taken by the user to a separate waste collection point designated for safe handling and recycling under local laws. Waste Electrical and Electronic Equipment and batteries contain materials that, when correctly processed, may be recovered and recycled. Recycling products reduces the need of new raw materials and also reduces the amount of material that is sent for disposal as landfill. Improper handling and disposal can be harmful to your health and the environment. For more information regarding where the equipment can be accepted for recycling, please contact your local authority, recycling centre, distributor or visit the website http://www.hwmglobal.com/company- documents/.
Waste Electrical and Electronic Equipment
HWM-Water Ltd is a registered producer of Electrical and Electronic Equipment
in the United Kingdom (registration number WEE/AE0049TZ). Our products fall
under category 9 (Monitoring and Control Instruments) of The Waste Electrical
and Electronic Equipment Regulations. We take all environmental issues
seriously and fully comply with the requirements for collection, recycling and
reporting of waste products.
HWM-Water Ltd is responsible for Waste Electrical and Electronic Equipment
from customers in the United Kingdom provided that:
The equipment was produced by HWM-Water Ltd (Palmer Environmental / Radcom
Technologies / Radiotech / ASL Holdings Ltd) and supplied on or after 13th
August 2005. or
The equipment was supplied before 13th August 2005 and has been directly
replaced by HWM-Water Ltd products manufactured since 13th August 2005.
-
HWM-Water products supplied after 13th August 2005 can be identified by the following symbol:
-
Under HWM-Water Ltd.’s Terms and Conditions of Sale, customers are responsible for the cost of returning WEEE to HWM-Water Ltd and we are responsible for the costs of recycling and reporting on that waste.
-
Instructions for returning Waste Electrical and Electronic Equipment:
-
Ensure that the Waste Electrical and Electronic Equipment meets one of the two conditions above.
-
The waste will need to be returned by the regulations for transporting equipment with lithium batteries.
-
Pack the equipment in strong, rigid outer packaging to protect them from damage.
-
Attach a Lithium Warning Label to the package.
-
The package must be accompanied by a document
(e.g. consignment note) that indicates: -
The package contains lithium metal cells;
-
The package must be handled with care and a flammability hazard exists if the package is damaged;
-
Special procedures should be followed in the event the package is damaged, including inspection and repacking if necessary; and
-
A telephone number for additional information.
-
Refer to the ADR regulations on shipping dangerous goods by road.
-
Do not transport damaged, defective, or recalled lithium batteries by air.
-
Before shipping, the equipment must be shut down. Refer to the User Guide of the product and any applicable utility software for guidance on how to deactivate it.
-
Any external battery pack must be disconnected.
-
-
Return the Waste Electrical and Electronic Equipment to HWM-Water Ltd using a licensed waste carrier.
Under the regulations, customers outside the United Kingdom are responsible for Waste Electrical and Electronic Equipment.
The Battery Directive
As a distributor of batteries, HWM-Water Ltd will accept old batteries back
from customers for disposal, free of charge, under the Battery Directive.
PLEASE NOTE: All lithium batteries (or equipment containing lithium
batteries) MUST be packaged and returned under the relevant regulations for
transporting lithium batteries.
A licensed waste carrier must be used for transporting all waste.
For more information on Waste Electrical and Electronic Equipment compliance
or the Battery Directive please e-mail CService@hwm-
water.com or phone +44 (0)1633 489 479
Radio Equipment Directive (2014/53/EU)
-
Radio frequencies and Powers.
The frequencies used by the wireless features of this product are in the 700 MHz, 800 MHz, 850 MHz, 900 MHz, 1700 MHz, 1800 MHz, 1900 MHz and 2100 MHz ranges.
Wireless frequency band and maximum output power:- GSM 700/800/850/900/1700/1800/1900/2100 MHz: less than 2.25W
-
Antennas
Only antennas supplied by HWM should be used with this product.
European Union – Regulatory Compliance Statement:
- Hereby, HWM-Water Ltd declares that this equipment complies with the following:
- Radio Equipment Directive: 2014/53/EU and the relevant UK Statutory Instruments requirements.
- A copy of the full text of the UK and EU declarations of conformity is available at the following URL:
- www.hwmglobal.com/product-approvals/
FCC STATEMENT
FCC Compliance Information
- Fluid Conservation Systems,
- 1960 Old Galesburg Road, Suite 150,
- State College, PA 16803
- T: 1-800-531-5465
The following product models
- MultiLog 2 Logger (ML///*)
- MultiLog 2 Pressure Transient Logger (PT///*)
- MultiLog 2 Enhanced Network Logger (EL///*)
- Multilog 2 WITS Logger (WL///*)
- MultiLog 2 WW Logger (MP///*)
Comply with the rules, as applicable.
FCC compliance statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used under the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Contains: FCC ID: RI7ME910C1NV or RI7ME910G1WW or RI7LE910CXWWX.
Industry Canada – Compliance Statement
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Contains IC: 5131A-ME910G1WW or 5131A-LE910CXWWX.
CONTACT
- HWM-Water Ltd
- Ty Coch House
- Llantarnam Park Way
- Cwmbran
- NP44 3AW
- United Kingdom
- +44 (0)1633 489479
- www.hwmglobal.com
©HWM-Water Limited. This document is the property of HWM-Water Ltd. and must not be copied or disclosed to a third party without the permission of the company. Copyright reserved.
References
- Convenient Water Delivery Near You | Primo Water Delivery
- HWM | Energy Management, Pressure Control, Data Collection, Environmental Monitoring, Leak Detection,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>