POTTER CSLB24V Series Indoor Outdoor Wall Mount Colored Lens Strobe Owner’s Manual

: June 9, 2024
: POTTER

Table of Contents

CSHB/CSLB24
Documents / Resources

CSHB/CSLB24

INDOOR/OUTDOOR STROBE HORN/STROBE COMBINATION

POTTER CSLB24V Series Indoor Outdoor Wall Mount

Unit alone is UL Listed for outdoor use
Low current consumption
Wide operating voltage range
AWG #18 lead wire connection
Mounts to SBX-1 outdoor box, SBP-1 plastic mounting plate (optional), or SBP-2 plate (included) on single gang back box
ALERT decal included
Available in red or gray housing
Available strobe colors: Amber, blue, green, and red

The Amseco’s Outdoor Colored Strobe utilizes a patented design that produces a true color output. The CSLB and CSHB offer a slim look with a stylish round strobe. The CSLB and CSHB colored strobes and colored strobe/horns are listed indoor or outdoor applications and are completely sealed units. The colored coded flying leads provide a simple connection of one or multiple devices. The strobe/horn combinations are selectable with either a continuous or ANSI Temporal 3 output.

These strobes are used in various applications such as Mass Notification, Severe Weather Warning, Machine Operation, Industrial Detection Systems, Access Control and many, many more. These devices are UL listed for general signaling (UL 1638) and comply with the requirements for signaling of the hearing impaired (UL 1971). The bodies of the strobes are available in red or gray. The strobes are designed for 24 VDC, however will operate anywhere between 16 and 33 VDC.

Ordering Information

POTTER CSLB24V Series Indoor Outdoor Wall Mount table

Contact Potter before ordering

Engineering Specifications

The Amseco CSLB24 colored strobe or CSHB24 colored strobe/horn shall be provided for visual (and audible with CSHB) notification. The device shall be completely sealed and listed for both indoor and outdoor installations. For outdoor installations, the SBX-1 back box shall be provided. The devices shall be UL listed for General Signaling and shall comply with light output requirements of UL 1971 for spacing. The colored strobes shall have a minimum light output of 15 cd. The reflective mirror shall be the same color as the lens to produce a true color of amber, red, blue or green. The strobe shall operate between 16 and 33 VDC regulated or full wave rectified. The strobe shall flash a minimum of once a second continuously at 16 VDC.

Installation

SBX-1

Mounting Screw Covers
Conduit Connector and Pipe

SBP-1

POTTER CSLB24V Series Indoor Outdoor Wall Mount 2

Single Gang Box
4″ Standard Box

Dimensions: inches (mm)

POTTER CSLB24V Series Indoor Outdoor Wall Mount 3
SBX-1 Surface Mount Back Box

SBP-1 Plate

Bottom View Side View

Front View Back View

Wiring Diagram

WIRING 1
Strobe and Horn in Unison

Control Panel
To Next Device or End-of-Line Resistor

WIRING 2
Strobe and Horn Independently

F.A.C.P.
Horn Signal Circuit
F.A.C.P.
Strobe Signal Circuit
To Next Device or End-of-Line Resistor

WIRING 3 Wiring Diagram for Audible Strobe Class “B” Circuit without Audible Silence Feature

POTTER CSLB24V Series Indoor Outdoor Wall Mount C3

F.A.C.P.
Signal Circuit
To Next Device or End-of-Line Resistor

WIRING 4
Wiring Diagram for Audible Strobe Class “B” Circuit with Audible Silence Feature (CSHB24)

POTTER CSLB24V Series Indoor Outdoor Wall Mount C4

F.A.C.P.
Strobe Signal Circuit
F.A.C.P.
Horn Signal Circuit
To Next Device or End-of-Line Resistor

Wire Color: Horn: 2 – Orange (+) 2 – White (-) Strobe: 2 – Red (+) 2 – Black (-)

PRINTED IN USA MFG. #5401401 – REV A

firealarmresources.com

Documents / Resources

| POTTER CSLB24V Series Indoor Outdoor Wall Mount Colored Lens Strobe [pdf] Owner's Manual
CSLB24V Series Indoor Outdoor Wall Mount Colored Lens Strobe, CSLB24V Series, Indoor Outdoor Wall Mount Colored Lens Strobe, Wall Mount Colored Lens Strobe, Colored Lens Strobe
---|---