breathe ilo Cycle Tracker User Manual
- June 3, 2024
- breathe ilo
Table of Contents
Cycle Tracker
User Manual
General
breathe ilo is the first fertility tracker worldwide, which uses CO2
measurements to identify your fertile days. breathe ilo shows you the highest
probability to conceive and helps you to understand your body better. With
breathe ilo you have found your personal companion to evaluate your individual
cycle pattern.
Please read the user manual and the safety regulations carefully to gain the
best possible results. Have fun with the breathe ilo cycle tracker and App!
1.1 Scope of delivery
1x breathe ilo cycle tracker
1x mouthpiece
1x nose clip
1x charging cable
1x Quick Guide to user manual
Please note: For charging, you require a standard charger with USB-A
output.
Recommended specification:
- Output 5 V DC
- 500 mA minimum current
1.2 Compatibility with mobile devices
The requirements for using the breathe ilo cycle tracker and the breathe ilo
App are:
- Apple version iOS 11.0 or later
- Android version 6.0 or later
In addition, you require a stable internet connection (3G or WIFI) as well as
Bluetooth LE for pairing with the cycle tracker. You can find out whether your
smartphone is
compatible in the device information of your smartphone.
1.3 Safety instructions
Failing to comply with safety instructions can lead to dangerous situations.
Therefore, please follow the following instructions to use breathe ilo safely.
- breathe ilo can be used by individuals with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- To charge the battery, please only supply the device with a protective low voltage that corresponds to the marking on the device.
- This device contains a non-replaceable rechargeable battery.
- Only use indoors to achieve the best measurement results.
- Do not use the device after dropping it since calibration might be misaligned.
- Do not use the device if it is visibly damaged.
- Do not press the power button with sharp objects or fingernails.
- During the charging process it is not possible to take a measurement.
- The measurement must be taken with the provided mouthpiece and noseclip.
- Please do not look into the sensors or insert your finger or tongue into the measuring tube as this can lead to skin irritations.
- This application is not intended for children. It contains small parts and should therefore be kept out of their reach at all times.
1.4 Scope of application
Breathe ilo is a device designed to monitor the CO2 partial pressure during
the female cycle to help predict ovulation and aid in conception. The CO2
partial pressure is the most important measurement value to predict the
fertile days, since changes in the CO2 partial pressure during the cycle
correlate directly with the fertile phase.
To accurately determine the cycle phases, the measurements should be carried
out daily – ideally – within the same time frame. Although the measurement is
independent of the time of day, we highly recommend integrating the
measurement into your morning routine. That way there is no danger of
forgetting to take a measurement.
The device is used in combination with the breathe ilo smartphone App to
display the results of a measurement. In addition, body symptoms can be
entered in the form of a journal. This input helps, among other things, to get
to know your body better.
1.5 Contraindication
breathe ilo is meant to be used by people 18 years or older. Individuals
outside these age groups are not allowed to use breathe ilo.
breathe ilo is not approved as a contraceptive, please do not attempt to use
it for contraception purposes.
breathe ilo does not work for women who suffer from respiratory illnesses
(e.g. Asthma, COPD), use hormonal contraceptive methods or excessively consume
alcohol and/or drugs.
Breathe ilo has been tested with women, whose average cycle length lies
between 24 and 35 days. Please note that we’re not able to evaluate cycles
with a length of less than 21 days or more than 40 days correctly. Measurement
results may not be valid for women with severely irregular cycles, cycle
disorders (e.g. PCOS) and in case of acute disease (e.g. influenza).
Do not consume any carbonated beverages, exercise or smoke within 15 minutes
before performing the measurement.
During the measurement it is important to avoid nasal breathing, so please
always use the nose clip or hold your nose closed for best results.
Please note that breathe ilo is a product for laymen. Should you discover any
anomalies or similar during use, please contact your expert team.
The breathe ilo device
2.1 Handling and function display
- Measuring tube
- Sensor window
- Mouthpiece, applied part type BF
- On/off switch
- Charge level indicator
- Bluetooth indicator
- Device body, applied part type BF
The device can be turned on and off by pressing the power button once. The
measurement windows are located on the inside oft he measuring tube.
When the device is switched on, both the Bluetooth-LED (blue) and the power
LED light up. The power LED has the following meaning:
- White: initialization of the device
- Green: charge level is high/full
- Yellow: charge level is low
- Magenta: charge level almost empty. Use/measurement may no longer be possible.
The Bluetooth LED has the following meaning:
- Turquoise: initialization of the Bluetooth module.
- Blue flashing: Bluetooth module is ready for pairing
- Blue: Bluetooth connection established
- Magenta: there is an error with the Bluetooth module. In this case, please contact our support.
After the device is connected to the app, the charging status can be read via
a charge level indicator, which is also displayed in the app during the
measurement.
2.2 Charging
Connect the breathe ilo to the USB charger via the supplied USB cable as soon
as the charging lamp lights up in the color magenta. The power LED lights up
white briefly at the beginning and flashes in the color of the current
charging status during the charging process. When the LED lights up green and
then switches off, the battery is fully charged. Note that the device cannot
be switched off during the charging process. Charging stops automatically when
the battery is full. To stop charging manually, the device must be
disconnected from the charger.
Important: Please charge the device fully before using it for the first
time.
2.3 Assembly
At the back of the device you will find the opening fort he mouthoiece. Insert
the mouthpiece and lock it with a slight rotation clockwise.
To remove the mouthpiece from the device, simply turn it slightly
counterclockwise.
2.4 Cleaning and desinfection
Please clean the device once a week carefully with a soft, clean, and dry
cloth that is free of lint. The result of the measurement can be negatively
influenced by dirty windows.
Dirt can also be removed with a damp cloth (water or neutral detergent).
Please note that breathe ilo is not waterproof and moisture and humidity
penetration can cause damage. Make sure to dry the device afterwards with a
soft, dry cloth. Alcohol (up to 70%) can also be used for disinfection.
Disinfection of the device and mouthpiece is recommended once a month.
The mouthpiece is dishwasher safe and may be cleaned in the dishwasher. The
nose clip can be cleaned with soap and water.
Important: Please do not share the device with another person due to
hygienic reasons.
The breathe ilo App
The breathe ilo device is operated via an app and shows you the desired
information about your cycle. It is also possible to use the breathe ilo app
without using the breathe ilo cycle tracker.
3.1 Installation and start-up
Please open the app and follow the instructions to create a user account and
connect to the breathe ilo device. Your data will be protected and not
forwarded to third parties. The device and the App communicate via Bluetooth.
The pairing process therefore is necessary before the first use. Afterwards
the device and the App connect automatically. If you decide to use the breathe
ilo device later in time, you can always perform the pairing process in the
settings.
Please note that Android smartphones require location to be enabled in order
to use Bluetooth Low Energy. Don’t worry, we will never use or store your
personal location
data.
3.2 Registration
3.2.1 Signing up
First register to create your breathe ilo account. You can register with a
valid email address, Google account or Apple account (iOS only). You will then
be asked to answer a few personal questions. It is also necessary to enter
your cycle data so that the algorithm can respond to you individually.
Therefore, please consider carefully how long
your cycle is and how long your period lasts on average.
Important: The cycle data cannot be edited afterwards.
3.2.2 Bluetooth Pairing
The next step in the registration process is to pair a breathe ilo device or to continue without a device. If you have a breathe ilo device, please switch it on and select it in the breathe ilo app. You will find the Bluetooth name on the back of your breathe ilo device. The pairing between the device and the app is now complete.
3.2.3 First cycle input
The first cycle can only be measured correctly if you start using breathe ilo
between the first and third day of your cycle. The first day of menstruation
always marks the first day of your cycle. We do recommend waiting for your
next cycle to start if you are further along and want to start using breathe
ilo. A correct evaluation of your data is no longer possible if the
measurement starts after the 4 th day of the cycle. This is especially
important if you want to use the app in combination with the breathe ilo
device.
3.3 Handling
3.3.1 Main menu
On the main screen you can find all important information about your cycle.
This overview always shows you the current day.
How to find your way around the main menu:
- Cycle information: here you will find information about your current cycle phase
- Cycle: your cycle is displayed in a circle
- Calendar: here you get to the calendar view
- Cycle day: the current cycle day is shown here
- Menstruation: your period is displayed in pink
- Follicular phase: your follicular phase is displayed in purple
- Ovulation phase: your fertile phase is displayed in green. This is the phase in which pregnancy is most likely to occur.
- Luteal phase: your luteal phase is displayed in yellow
- Recommendations for the current cycle phase: here you will find daily tips and helpful recommendations for the cycle phase you are currently in. The recommendations are based on nutrition, exercise, and everyday life. Please note that the recommendations are only displayed if you have taken a measurement or made an entry in the journal.
- Start measurement / journal entry: Here you can start the measurement. If you do not use the app in combination with the breathe ilo cycle tracker, you will get directly to the journal.
- Settings: Here you can access the settings Worth knowing: the graphic in the app also changes as your cycle progresses. The cycle phase you are currently in is always shown in the darker color in the main menu.
3.3.2 Enter your period
The first day of your period must be entered for the algorithm to be able to
give you
accurate results. You can enter and/or edit your period in the calendar or in
the
journal. To do this, click on “Yes” in the Period section and then select the
intensity of
your bleeding. In the calendar, you can add or remove your period by tapping
on the day you’d like to select. If you want to edit your period, please note
that you can only change the start and end of your bleeding.
Note: Please remember to always enter your period correctly for best
results. The earliest you can start a new cycle is the 20th day of your cycle.
Also note that your period can only be edited 3 months back.
3.3.3 Taking a measurement
Please note that you can only perform a measurement if you use the app in
combination with the breathe ilo device and have signed up for a monthly or
annual measurement subscription. Without using the breathe ilo device, it is
only possible to make entries in the journal.
- To execute a measurement, please sit down
- Open the breathe ilo App
- Tap on the breathe ilo button to start the process
- Follow the instructions on the App:
a. Switch on your breathe ilo device
b. Connect device and smartphone via Bluetooth
c. Sign up for a monthly or annual subscription (screen appears once when creating a subscription; the subscription can also be set up in advance in the settings. Even if the first two months are free, it is necessary to set up a subscription with a payment option).
d. Wait until the end of the countdown, sit down comfortably, and prepare for the measurement
e. Put the mouthpiece onto the device
f. Put on the nose clip to avoid nasal breathing
g. Bring the device to your mouth. Please bite directly onto the mouthpiece. Your teeth should not hindert he measurement.
h. Breathe (inhale and exhale) calmly into the device for 60 seconds and try to move as little as possible while measuring.
i. Enter your symptoms / activites into the journal
Note: The countdown before the measurement is to prepare you and the
device for the measurement. We have noticed that a minimal amount of
preparation time gives even better results, so we ask you to consciously take
this time. Take this time, sit quietly, and breathe in and out calmly before
the measurement.
3.3.3.1 Measuring results
Important: Please note that the measurement can only be performed if you use
the app in combination with the breathe ilo device.
After a successful measurement, your current cycle phase is displayed on your
home screen. The days with the highest probability of conception are displayed
as the ovulation phase. On the other days, you will be shown the other cycle
phases, as conception is less likely during that time.
3.3.4 Troubleshooting
Important: Please note that the measurement can only be performed if you use
the app in combination with the breathe ilo device.
Please repeat the measurement if the App displays an error or if you feel that
the measurement was not correct (e.g. because of coughing). Accurate results
are not possible if you have not measured daily or if more than two
measurements per cycle have been missed. Please do not change the breathe ilo
device during the cycle.
If no connection can be established between your breathe ilo device and the
App, please switch the device off and on again. If the device cannot be
switched off due to an error, it can be switched off by pressing the power
button for at least 6 seconds.
Reliable results are only possible if you have diligently entered your cycle
in the cycle calendar and have not missed any of your daily measurements. If
you are unable to solve the problem, please contact our support.
3.4 Further menu items
3.4.1 Cycle
Under “Cycle” you will find an overview of your current cycle. All symptoms
and activities that you enter during the cycle are clearly displayed here.
Under “Comparison” you can compare all your cycles with each other. Here you
will also find the average duration of your cycle phases.
3.4.2 Calendar
In the calendar you will find a monthly overview where you can keep track of
your cycles and see forecasts for upcoming cycles.
The colors in the calendar view should be interpreted as follows:
-
Light pink: Menstruation forecast
-
Dark pink: Period entry (real data)
-
Light green: Forecast ovulation phase
-
Dark green: Confirmation of ovulation phase
-
Current day: black border
Important: Please note that confirmation of the ovulation phase is only
possible if you use the app in combination with the breathe ilo device.
3.4.3 Wiki
Attention: all videos are in german only
In our breathe ilo Knowledge Area, you can watch videos on the topics of
fertility and menstruation in our Pro Feature. The videos always relate to
your current cycle phase and cover the areas of nutrition, lifestyle and
sport. Interesting articles on these topics can also be read in our blog area.
The aim here is to clear up prejudices and provide clarity on misunderstood
topics.
3.5 Settings
3.5.1 Profile
Here you can review your profile data and make changes to your email address,
password, height, weight, or year of birth if you made a mistake during
registration.
If you want to delete your profile, please contact our support. Only our team
can delete a user profile from the server.
3.5.2 Subscribe and cancel subscription
Attention: all videos are in german only
You can take out subscriptions for measurement and the knowledge library
(videos). You can find the settings under Profile options > Premium
subscription. If you have not yet signed up for a subscription, you will see a
paywall that allows you to sign up for an annual or monthly subscription.
You can recognize a concluded subscription in the settings by the information
“Your current subscription”.
The subscription can be cancelled via the respective App Store – click on
“Manage subscription”. The subscription for measurement with breathe ilo must
also be cancelled via the respective app store.
3.5.3 Reminder
Here you can activate the reminder function to make sure you never forget a
measurement or a journal entry. You will receive the reminder on your lock
screen at whatever time you set.
Technical data and additional information
4.1 Technical Data
Weight | 78g |
---|---|
Dimensions (L x W x H) | 112 mm x 62 x 24 mm |
Power supply | Minimum requirements: USB-Type A Stecker, Output 5V DC and 500mA |
Battery | Lithium-Polymer rechargeable battery 750mA/3.7 V complies with EN |
62133-2:2017 and UN 38.3
Frequency band of operation| 2400 – 2483.5 MHz HF RF output power: < 4 dBm
EIRP
(< 2.5mW, BT-LE Class 2)
4.2 Storage and operating conditions
Operation| The device is maintenance-free. No preparation time for initial
operation is necessary.
---|---
Environmental temperature / air pressure / Humidity for operation| 15 bis 35
Grad centigrade / 700| -1060
| mbar / 15 – 75% RH non-condensing
---|---
Storage and transport| Please protect the device from moisture and do not
store it for more than three months at the specified conditions, as the
battery life may be shortened. Note that the unit must be fully charged at
least every four months and before the first use.
Environmental temperature / air pressure / humidity for storage and transport|
-10 to 50 Grad centigrade / 600 – 1060 mbar / 15 – 75% RH non-condensing
4.3 Packaging symbols
Products with CE marking comply with the specified EU directives on product
safety
vDo not dispose this product in household waste
Device uses Bluetooth for data transmission
4.4 Maintenance
breathe ilo is a maintenance-free product. We ask you to handle the device
with care. Please do not try to open the device or make technical changes
under any circumstances, as this would lead to destruction or functional
impairment of the device.
4.5 Disposal of waste
The proper disposal of breathe ilo and its accessories is very important for
the environment. Since the measuring device uses a rechargeable battery as its
energy source, it must not be disposed of with regular household waste. Please
dispose of the measuring device according to your regional disposal
regulations. The remaining consumables (nose clip, mouthpiece) can be disposed
of in the household waste.
4.6 Order of consumable materials
If you would like to replace the mouthpiece or nose clip, you can simply re-
order them in our Onlineshop.
4.7 Warranty & return
You can find information about it on our website.
4.8 Help & contact
If you encounter any malfunctions during use or need our help, please contact
us via our helpdesk
www.breatheilo.com/support. Our Website
will also provide you with further information.
© 2019 breathe ilo is a word-image brand
of breathe ilo GmbH. All rights reserved.
Not approved for contraception.
Version: 4.2
Date: 20.04.2022
breathe ilo GmbH
Margaretenstraße 70
A-1050 Wien
Management board: Wernhard Berger, Lisa Krapinger
www.breatheilo.at
contact@breatheilo.at
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>