MASTER AND DYNAMIC MW08 Active Noise-Cancelling True Wireless Earphones User Guide

: June 5, 2024
: MASTER AND DYNAMIC

Table of Contents

QUICKSTART GUIDE
CONTROLS
FIT
- EAR TIP OPTIONS
MW08 SPORT
PAIRING
INSERTING YOUR EARPHONES
References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

ACTIVE NOISE-CANCELLING TRUE WIRELESS EARPHONES

QUICKSTART GUIDE

CONTROLS

MULTI-FUNCTION BUTTON

1X: PAUSE / PLAY / ANSWER CALL
2X: SKIP FORWARD
3X: SKIP BACK
HOLD: ACTIVATE VOICE ASSISTANT

MULTI-FUNCTION BUTTON
VOL –
VOL +

AMBIENT LISTENING MODE

HOLD VOL+ FOR ON/OFF

ACTIVE NOISE-CANCELLING

HOLD VOL- FOR ON/OFF

*SELECT YOUR DEFAULT ANC AND AMBIENT SETTINGS IN THE M&D CONNECT APP

CASE BATTERY

Case battery charges to 50% in 15 minutes, 100% in 60 minutes via charging cable and charges to 50% in 30 minutes and 100% in 100 minutes via wireless charging.

EARPHONE BATTERY

Earphone batteries charge to 50% in 15 minutes and 100% in 45 minutes via cable or wireless charging.

LEDs should face upwards when charging the MW08 SPORT case on a wireless charging device. Wireless charging device is not included.

FIT

For the most secure fit and best acoustics, choose the ear tips that form a secure seal with your ear. Your earphones come with medium silicone ear tips attached. 2 sizes of foam ear tips (S,L) are also included for a more secure fit during workouts. Clean only with a damp sponge (never alcohol or harsh chemical cleaners).

EAR TIP OPTIONS

SILICONE

FOAM

MW08 SPORT

PAIRING

The first time you take both earphones out of their case they will enter pairing mode.

STEP 1: Open the Bluetooth menu on your device.
STEP 2: Select M&D MW08S.

MULTI-FUNCTION BUTTON
PULSING INDICATOR LIGHT

To manually activate pairing mode , hold down the multi-function button until the indicator light starts pulsing/pairing tone is heard.

NOTE: If you are already connected to a device, remove the right earphone from your ear to avoid activating your voice assistant.

INSERTING YOUR EARPHONES

STEP 1: If you are using foam ear tips, pinch sides to compress foam
STEP 2: Tilt the earphone forward with the ear tip resting lightly in your ear canal
STEP 3: Rotate the earphone down until the ear tip forms a seal with your ear canal
STEP 3: If you are using foam ear tips, hold device in place until foam fully expands to create a seal

For more information visitmasterdynamic.com/support
Download the M &D Connect App for the complete Master & Dynamic experience.