AMANSON H01 Computer Gaming Case User Guide

AMANSON H01 Computer Gaming Case

Case Features

1. Tempered glass
2. Main frame
3. 1/o port
4. Metal side panel
5. Hard disk bracket
6. Glass front panel
7. Fans (90mm)
8. Fans (ARGB)
9. Position of the PSU
10. Glass panel

Screw Kit

Case Specifications

• Maximum CPU cooler height  160mm
• Maximum GPU length  400mm
• Maximum PSU length 220mm

Fan Compatibility

• Side  3x120mm/2x140mm
• Top  3x120mm
• Bottom  3x120mm
• Rear    1x90mm

Radiator Compatibility

• Top  360mm/240mm
• Side  360mm/280mm/240mm

Disassembly Steps

Please protect the edges and corners of the tempered glass! Don’t hit the corners, otherwise the glass is likely to shatter.

Motherboard installation

NOTE : For ease of transport and to prevent the product from being damaged, we pre-installed the fans on the chassis. If your 1/0 shroud of the motherboard is too high, you can remove the rear fan (as shown in 0) first before installing, which will be more convenient for you.
Motherboard Compatibility: EATX (12″*10.9**) / ATX / Micro ATX.

1/0 panel connection

1. Power Button
2. Reset
3. Headphone
4. MIC
5. TYPE-C
6. USB 3.0

Water Cooling Radiators & Fans installation

Installing SSD/HDD

Fan Connection

NOTE : IF THE CONTROLLER CANNOT ENTER THE MOTHERBOARD SYN­CHRONIZATION SYSTEM, PLEASE CONNECT THE LIGHT CONTROL BUTTON OF THE CONTROLLER AND PRESS AND HOLD TO ENTER THE MOTHERBOARD CONTROL SYSTEM!

Installing PCI Card(s)/PCI-E/GPU

Power Supply installation

PSU is not included in the package.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>