OKNIFE Otacle Utility Knife 3.38 Inch Closed Blade User Manual
- June 9, 2024
- OKNIFE
Table of Contents
OKNIFE Otacle Utility Knife 3.38 Inch Closed Blade
Product Information
- Bottle Opener
- Blade made of SK2 Steel
- Slide Button for opening and closing the knife
- 6.35mm Hex Wrench
- Slotted Screwdriver/ Mini Pry Bar
- Dimensions: 85.8 x 32.7 x 6.3mm or 3.38 x 1.29 x 0.25in
- Weight: 46.7g / 1.65oz (G10, Stainless Steel), 45.7g / 1.61oz (Carbon Fiber, Stainless Steel)
- Not intended for use on materials such as metals and rocks or for food preparation
- Blade replacement is possible when necessary
Product Usage Instructions
Thank you for purchasing the Oknife product. Please read these instructions
carefully before use and keep them for future reference.
Opening the Knife
- Ensure that the knife is unlocked.
- Press the slide button and push it forward to drive the blade to the desired point.
- Release the button to lock the blade at the desired point.
Closing the Knife
- Press the slide button and pull it back to slide the blade to the fully closed position.
- Release the button to automatically lock the blade.
- The twist lock can now be operated.
Blade Replacement
- Turn the locking screw on the back counterclockwise by hand until it is completely removed.
- Take the blade out of the knife outlet by sliding it.
- Insert the new blade completely into the knife body from the knife outlet.
- Install the button and locking screw and screw it clockwise to the set depth (tighten the locking screw completely, then loosen it by 0.5~1 turn in reverse).
Note: Do not keep turning the locking knob counterclockwise,otherwise the screw will loosen and cause the lock to fail or the knob to fall off.
Thank you for purchasing this Oknife product. Please read this manual carefully before use and keep it for future reference!
PARTS DESCRIPTION
SPECIFICATIONS
HOW TO USE
LOCK AND UNLOCK
After the blade is completely closed, turn the locking screw 90°clockwise to
the vertical position to lock; turn the locking screw 90°counterclockwise to
the horizontal position to unlock.
NOTE: Do not keep turning the locking knob counterclockwise, otherwise the screw will loosen and cause the lock to fail or the knob to fall off.
OPEN THE KNIFE
After being unlocked, press the button and push it forward to drive the blade
to the desired point and release the button. The blade can be used and locked
at the desired point.
CLOSE THE KNIFE
Press the button and pull it back, sliding the blade to the fully closed
position, then release the button. It will automatically lock. At this time,
the twist lock can be operated.
BLADE REPLACEMENT
- Turn the locking screw on the back counterclockwise by hand until it is completely removed.
- Take the blade out of the knife outlet.
- Put the new blade completely into the knife body from the knife outlet.
- Install the button and locking screw and screw it clockwise to the set depth (tighten the locking screw completely, then loosen it by 0.5~1 turn in reverse).
DANGER
- Keep out of reach of children. DO NOT let your children play with this knife to prevent injuries.
- This blade is very sharp. Improper use may cause injuries.
WARNING
Make sure the blade is fully retracted and locked when storing or carrying the
knife. •DO NOT use the knife to cut hard objects such as metals and rocks, as
this may cause the blade to chip or break. This knife is NOT intended to be
used for food preparation.
NOTICE
The knife blade may lose its sharpness over time. You can replace it with a
new blade (not included) when necessary.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>