OKNIFE Otacle 2 EDC Ti Bottle Opener User Manual
- October 30, 2023
- OKNIFE
Table of Contents
OKNIFE Otacle 2 EDC Ti Bottle Opener
Product Information
- Dimensions: 85.8 x 32.7 x 6.3mm / 3.38 x 1.29 x 0.25in
- Weight: 46.7g / 1.65oz (G10, Stainless Steel), 45.7g / 1.61oz (Carbon Fiber, Stainless Steel)
- Blade Material: SK2 Steel
- Handle Material: G10, Stainless Steel or Carbon Fiber, Stainless Steel
- Parts Description: Bottle Opener, Blade, Slide Button, 6.35 mm Hex Wrench, Slotted Screwdriver/ Mini Pry Bar
Product Usage Instructions
To open the knife:
- Unlock the knife.
- Press the slide button and push it forward to drive the blade to the desired point.
- Release the slide button to lock the blade at the desired point.
To close the knife:
- Press the slide button and pull it back to slide the blade to the fully closed position.
- Release the slide button to automatically lock the blade.
- At this time, the twist lock can be operated.
To replace the blade:
- Turn the locking screw on the back counterclockwise by hand until it is completely removed.
- Take the blade out of the knife outlet.
- Put the new blade completely into the knife body from the knife outlet.
- Install the button and locking screw and screw it clockwise to the set depth (tighten the locking screw completely, then loosen it by 0.5~1 turn in reverse).
Do not use the knife for cutting hard materials such as metals and rocks, as
this may cause the blade to chip or break. It is also not intended to be used
for food preparation.
Keep the manual for future reference. Do not allow children to play with the
knife to avoid injuries.
Thank you for purchasing this Oknife product. Please read this manual carefully before use and keep it for future reference!
PARTS DESCRIPTION
SPECIFICATIONS
HOW TO USE
LOCK AND UNLOCK
After the blade is completely closed, turn the locking screw 90°clockwise
to the vertical position to lock; turn the locking screw 90°counterclockwise
to the horizontal position to unlock
NOTE : Do not keep turning the locking knob counterclockwise, otherwise the screw will loosen and cause the lock to fail or the knob to fall off.
OPEN THE KNIFE
After being unlocked, press the button and push it forward to drive the blade to the desired point and release the button. The blade can be used and locked at the desired point.
CLOSE THE KNIFE
Press the button and pull it back, sliding the blade to the fully closed
position, then release the button. It will automatically lock. At this time,
the twist lock can be operated.
BLADE REPLACEMENT
- Turn the locking screw on the back counterclockwise by hand until it is completely removed.
- Take the blade out of the knife outlet.
- Put the new blade completely into the knife body from the knife outlet.
- Install the button and locking screw and screw it clockwise to the set depth (tighten the locking screw completely, then loosen it by 0.5~1 turn in reverse).
DANGER
- Keep out of reach of children. DO NOT let your children play with this knife to prevent injuries.
- This blade is very sharp. Improper use may cause injuries.
WARNING
- Make sure the blade is fully retracted and locked when storing or carrying the knife.
- DO NOT use the knife to cut hard objects such as metals and rocks, as this may cause the blade to chip or break. This knife is NOT intended to be used for food preparation.
NOTICE
- The knife blade may lose its sharpness over time. You can replace it with a new blade (not included) when necessary.
- Clean the knife and wipe it dry immediately after use. Apply oil to the blade to prevent rust if the knife is left unused for a long period of time. Store in a dry place.
WARRANTY
Your Oknife Utility knife Series products are guaranteed against defects in material and workmanship and have a limited lifetime warranty to the original purchaser of the products.
- Oknife Utility knife Series Team will not warranty products due to loss, damage caused by abuse, neglect, misuse, or accident.
- Repairs to your product performed by any source other than Oknife Utility knife Series Team unconditionally voids the knife’s warranty.
- Cost for postage is the responsibility of the customer.
USA Customer Support
cs@olightstore.com
Global Customer Support
contact@olightworld.com
Dongguan Olight E-Commerce
Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park,
No 6 Zhongnan Road, Changan Town,
Dongguan City, Guangdong, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>