p.n. 560224
2 Wire System Wi-Fi 7 Inch Digital Color TFT Monitor
with Touch Screen & Picture Memory – DX470
User Manual

Please read this manual carefully before using the product you purchase, and keep it well for future use.
Please note that images and sketch maps in this manual may be different from the actual product.

Parts and Functions

Key functions

Display the visitors image.
[2]| Power/No Disturb indicator| Show the power status of the system.
Show the no disturb status.
[3]| Talk/Mon button| Press to communicate hands free with visitor.
Press to view the outdoor condition in standby mode.
| [4]| | Unlock button| Press to release the door.
[5]| Speaker| Send out sounds of ring tones, audios and alarms.
[6]| Upgrade button| Use to upgrade the software.
[7]| SD card slot| Use to insert micro-SD card
[8]| DIP| Use to set video match.
[9]| Terminal connector| SW+, SW-: Extra door bell call button connection port.
GND, BUS: Extra buzzer connection port.
| [10]| | Micro USB socket| For data transfer.
[11]| 2 wire connector| For 2 wire system.

Mounting

The installation height is suggested to 145~160cm.

1. Use screws to fasten the mounting bracket to the wall with mounting box.
2. Connect the 2 wire cable to the unit.
3. Mount the unit to the mounting bracket, make sure the unit is absolutely attached to the mounting bracket.

Main Menu

The Main menu is your starting  point for using all the applications  on your monitor.
Touch Unlock button, or touch  anywhere of the screen on monitor  in standby mode, the Main menu  will appear as follow:

1. Intercom icon
   Allows you to call other indoor station.

2. Call Record icon
   Allows you to view the call record.

3. Monitor icon
   Allows you to monitor the door stations, cameras

4. Setting icon
   Use to change the indoor station’s settings.

5. Call Scene icon
   Allows you to activate the functions of No disturb, Divert.

6.  Close icon
   Touch to turn off the screen.

7. About icon
   Allows you to view the information about device.

8. Status bar
   Displays icons that indicate the indoor station’s status.

9. Logo

10. Shortcut windows
    Touch to enter the corresponding items directly.

Status Bar Icons

| |
---|---|---
Description
| Missed call| Display when there is missed call unread. Touch to review the missed call in shortcut.
| No disturb| Indicates the device is in “No disturb” mode.
| Divert call| Indicates the device is in “Divert call” mode.
| Device online| Indicates device online, but not connect to internet.
| Cloud server worked| Indicates the device is connected to the cloud server.
| No cloud server| Indicates the device is not connected to the cloud server.
| Cloud server anomaly| Indicates the device cloud server connection is abnormal.
| mute| Indicates the device is in “Mute” mode.

Other status icons

| |
---|---|---
Description
| Recording| Indicates the device is recording
| Talking| Indicates the device is in “talking” status.
| Unlock| Indicates open the corresponding door.

Answering a Call

When you receive a call, the indoor station rings. Image will be displayed on the screen.

1. Touch   icon or press  TALK/MON button
   • Speak within about 50 cm of the microphone.
   • Begin communicating hands free with the visitor for 90 seconds.

2. When finished, Touch icon or press  TALK/MON button again.
   Available functions while talking on a call
   -‣ Door release
   -‣ Manual recording

Notes:

1. Receiving a call while talking with a door station
   • Other door stations calling is forbidden
   • Conclude current talking to answer the new call-in

2. Receiving a call while talking with other monitors
   • The talking will stop immediately, call tone sounds in normal.
   • The video image from the door station is displayed on the screen, talking, unlock,  capture images/videos are available.

Monitoring

This section can be used to monitor your home by enabling one of the cameras inside the apartment, the common areas (e.g. garages, garden), and at the entrance.

1. From the main menu, tap “Monitor” icon.

2. Select the desired tap.
   – Allows you to select door station camera or IP camera (if the system installs multi door station or IP camera).

3. Select the desired camera.

4. When finished, tap button on panel.

• During monitoring, images can be viewed, but audio cannot be heard.
  Available functions during monitoring:
  • Door release
  • Manual recording
  Note: Tap monitor quick actions to monitor corresponding camera directly (If the monitor quick actions is set on the shortcut windows).

Main Menu Switching

This section can be used to switch the menu.
The Steps are as follows.After restart, you can switch to the new menu. * All of the following have been explained by taking the DX470H menu as an example.

Favorite Setting

This section can be used to set your favorite.

1.  From the main menu, tap “Monitor” icon.
   – A list of available setting categories is displayed.

2. Select “Monitor” item.

3. Click the upper left corner of the item you need to select, and then the ”   ” icon will appear.

4.  If you need to cancel, click the upper left corner again.

PIP View

Precondition: this function requires the system to access the cameras or set the camera proxy settings.
The picture-in-picture display allows the user to see two images from different sources at the same time during the call, which is convenient for the user to see the visitor intuitively and concretely.
Feature of PIP view: – in call mode
– Picture in picture to avoid dead corner
– Able to watch both views from door station and IP camera
– Swap the two images by a simple touch

Quad View

Precondition: this function requires the system to access the cameras or set the camera proxy settings.
The Quad display allows the user to view four images quickly and simultaneously from different video resource, and to quickly switch & zoom in on a screen by one click.Feature of quad view:
– In monitor mode
– Able to display four images on a screen
– switch seamlessly between One-view and Quad-view
– free to zoom in any views

Making Calls

You can call other residences, common area phones or facility staff office, and even other rooms in your own residence.
whichever monitor answers the call, you can use many of the features described in feature available while talking on a call.
Namelist call by using the namelist

1. From the main menu, tap “Intercom” icon.
   – A list of available items is displayed.

2. Select “Namelist”.
   – A list of name is displayed if the system allows.

3. Select the desired name.
   – Calling the target directly.

Innercall
If you have monitors installed in different rooms in your residence, you can call those rooms and use the system as an intercom.

1. From the main menu, tap “Intercom” icon.
   – A list of available items is displayed.

2. Tap “Innercall” item to call.

Calling guard station

1. From the main menu, tap “Intercom” icon.
   – A list of available items is displayed

2. Select “Guard station”.
   – Calling the target directly.

View Call Record

The monitor records information about calls you have answered, missed, and made, and saves it in the call record.See the following steps to view the call record.

1. From the main menu, tap “Call record” icon.

2. Select the desired tap.
   – Missed: Displays calls you received but did not answer.
   – Incoming: Displays calls you answered.
   – Outgoing: Displays calls you made.
   – Playback: Displays pictures/videos you received / made.

3. Browse the call record as needed.

4. When finished, tap , return to previous menu. (or tap  return to home page)

Play videos
you can record camera video manually while talking to a visitor or monitoring camera video. See the following steps to play the video.

1. From the main menu, tap “Call record” icon.

2. Select the desired tap.

3. Tap the desired call record.
   – Displays the images/videos.

4. When finished, tap .

Controlling video playback
The following controls are available by tapping the screen while playing an image/video.

| Plays the video
---|---
Plays the next video
Plays the previous video

Delete video
?  Delete confirm

Note:

1. If without SD card, video recording time is 3 seconds. Up to 10 videos can be saved, Subsequent records will  overwrite the oldest items.
   If with SD card, video recording time is 10 seconds by default (Max 600 seconds could be set or customized).

2. Support 512G SD card.

No Disturb Mode

During a certain period, if you don’t want to be disturbed, you can go to set DND mode.

1.  From the main menu, tap “Call scene” icon.
2. Select the desired tap.
   – No disturb 8H: Set to no disturb mode 8 hours.
   – No disturb always: Set to no disturb mode always.
   Note:

• The no disturb indicator turns from green to red, to indicate that the no disturb function has been activated.
• This function will perform immediately if selected, and the status bar on main menu interface will show ” ” icon.

Divert Calls

The calling from door station can be diverted to your smart phone. please note that this function should be supported  by SIP network.

1. From the main menu, tap “Call scene” icon.
2. Select the desired tap.
   – Divert call if no answer: If nobody answers the call in 30s when receives call from door station, diverts the call to the smart phone. At this mode, the monitor will always open the screen and show image from door station during diverted, if the monitor answers the call at this time, diverted will conclude at once.
   – Divert call always: When receives call from door station, diverts the call to smart phone directly. At this mode, the  monitor will shut off the screen after diverting successfully, but you can still use it in normal.

Note:

• If divert the call to smart phone via Sip sever, need to choose one.
• This function will perform immediately if selected, and the status bar on main menu interface will show “ ****” icon.

Change the Monitor’s Settings

1. From the main menu, tap “Setting” icon.
   – A list of available setting categories is displayed.

2. Select the desired tap.

3.  Select the desired setting category.

4. Change the settings as desired.

5. Tap / to save the new setting.

List of settings

Ring Tone settings
The ring call tone can be set individually to distinguish different calling sources.
Totally 22 tones can be selected.
Ring volume: adjust the ringtone volume.
Ring timing: adjust the ringtone time.
Door1/2/3/4 calling ring: call tone from door entrance panel.
DoorBell ring: call tone from doorbell.
Intercom ring: call tone from an intercom of another apartment.
InnerCall ring: call tone from an intercom in your apartment.
GuardCall ring: call tone from Guard unit.

General setting
This section contains the general settings and device information.

1. Select [General ] item to enter general setting interface.

Date and time setting
The current date and time can be modified at any time.

Date mode: 2 display mode: month/date/year and date/month/year.
Time mode: 2 display mode: HOUR_12 and HOUR_24.
Date: touch it to set the date.
Time: touch it to set the time.
Internet time: can synchronize the system time.
Changing the display language
The default language can be customized. But you can change it to your desire language at any time.

• If the target language is not found in the window, touch > icon to scroll next interface.
  Setting monitor time
  The monitor time can be changed at any time. It’s available to set 30s, 60s, 90s, 120s, 150s, 180s, 210s, 240s, 270s300s.
  *30s is the default monitor time.

Shortcut setting
In this section it is possible to select the 4 quick actions that will appear on the home interface.

1. Touch it to enter the shortcut set interface.
2. Select the shortcut set item you want.
3.  Select the type of function for which you want to add a quick action.
4. Remove the quick action from the home interface.

SD card
If the device insert an SD card, the SD card info can be reviewed on the device.SD information: SD card capacity.
Copy image: touch it to copy the recorded images to SD Card.

Address Setup

1. From the main menu, tap “Setting” icon.
   – A list of available setting categories is displayed.

2. Select “Installer”, and then tap “Call_Nbr” item.

3. Input installer password (66666666 by default, or password free when door station into installer mode an enable it)

Input the room number.

Upgrade

1. From the main menu, tap “Setting” icon.
   – A list of available setting categories is displayed.

2.  Select “Installer”, and then tap “Upgrade” item.

3. Input installer password (66666666 by default, or password free when door station into installer mode and  enable it)

  Tap “Server” to select firmware source, update firmware could come from as below, tap on the source:

1. Cloud Server
   Cloud server reqiures internet.
   Server1[47.91.88.33] Server2[47.106.104.38]

2.  SD card
   Copy upgrade firmware befor upgrade.
   SD card

After tap “Download code” and input code, the code could get from v-tec support team  when device needed to update. After all, tap “Check” to load upgrade information from source.
With tips on the screen as below:
Please insert SD card. #Some upgrade is oversize, require SD card to storage firmware.
Mismatched.

Update firmware was founded, but is not suitalbe for this device.

Connect Error.

Check networks.

No file.

Source has been inspected but there is no firmware need to upgrade.

Otherwise the device will go into upgrade automatically, please do not power off during upgrade.

Reboot

It’s available to Auto reboot ,or Reboot the device.

SIP Config

It’s available to divert the call to mobile while out of home via SIP server.

1. Touch it to restore all settings on “SIP config” and create 2 SIP accounts,  one for DX monitor and one for VDP Connect APP. Server will apply to  restore two accounts’ password to default, and register it. Only when:
   ᴑ If your DX monitor is not brand new, we suggest you touch  “Use default” before testing.
   ᴑ VDP Connect APP is not able to register on server.

2. Touch it, DX monitor will apply to clean all SIP “contact” on server,   and also will try to register itself to server, with this function it will  helps when:
   ᴑ VDP Connect APP is not able to get push notification.
   ᴑ DX monitor has connect with Wi-Fi, but “Server” icon with “!” or  “x” beside.

IPC Setting

It’s available to set the related function of IP camera.

Add IPC by searching: Add the IP camera by searching online.Add IPC by Manual: Add the IP camera by manual.

Restore Factory Settings

This device allows the user to recover the settings to factory setting.

Download Setup VDP Connect APP

1. Scan and download VDP Connect APP, or search “VDP Connect” on APP store.

|
---|---
https://apps.apple.com/hk/app/vdpconnect/id1537340769| https://play.google.com/store/apps/details?id=com.vdpconnect.vdp

2. Permit “VDP Connect” with permissions, tap screen of IP monitor → Settings → Manager → SIP config →

3. . After login SIP account on VDP Connect APP, check on status bar, or tap on the  “Connected” area to manually register, until VDP Connect display.

Surveillance door station via VDP Connect APP

On VDP CONNECT APP, press on the icon and wait for a few seconds.
If the system have multiple door stations, you can switch to view the door station you want. And push PTT icon to talk, or push unlock icon to open the door.

Specification

Power supply:  DC 20~28V
Power consumption:  Standby 1.7W; Working 8.2W
Monitor screen:  7’’ IPS full view angle TFT
Display Resolutions:  1024*600 resolution
Wire Type:  2 wires, non-polarity
Wiring Distance:  100m (Approx. 330′)
Operating temperature:  -10 to +50 (°C)
Dimension:  161(H)×174(W)×22(D)mm

Precautions

1. All components should be protected from violence vibration. And not allow to be impacted, knocked and dropped.

2. Please do the cleanness with soft cotton cloth, please do not use the organic impregnant or chemical clean agent.
   If necessary, please use a little pure water or dilute soap water to clean the dust.

3. Image distortion may occur if the video monitor is mounted too close to magnetic field e. g. Microwaves, TV, computer etc.

4. Please keep the monitor away from wet, high temperature, dust, caustic and oxidation gas in order to avoid any  unpredictable damage.

5. Must use the right adaptor which is supplied by the manufacturer or approved by the manufacturer.

6.  Pay attention to the high voltage inside the products, please refer service only to a trained and qualified  professional.

19 Hayezira St. Industrial Zone Ramla 7255616
fax. 03-5214524 | phone: 03-5575110
Technical support *2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>