K407 3437477 Angle Valve Holder Instructions
- June 1, 2024
- K407
Table of Contents
K407 3437477 Angle Valve Holder
Instructions
-
Wrap the sealing tape onto the thread of the water inlet.
-
Check whether the water supply pipe is clean and free of dirts, sand and other debris.
-
Connect the angle valve to the water supply pipe.
-
Tighten the valve using 19mm spanner.
-
Make sure the handle is in the right position – vertical upside
-
The angle valve is installed now.
-
Drill a hole with a depth of 06 50mm
-
Insert the plug into the wall and fix the holder with the screw.
-
Connect the shower hose to the angle valve and spray.
-
Check whether any leaks or not.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>