HILL 2420073 Radiator Hose Installation Guide
- June 1, 2024
- Hill
Table of Contents
HILL 2420073 Radiator Hose
Product Specifications:
- Model: HILL 2420073
- Max Wattage: 3x15W
- Mounting Screws: Excluded
- Bulbs: Not included
Product Usage Instructions
Mounting the Light Fixture:
- Ensure that mounting screws are not included in the package.
- Select a suitable location for mounting the fixture.
- Follow the provided mounting instructions to securely attach the fixture to the desired surface.
Installing Bulbs:
- Purchase 13 bulbs (not included) for each shade frame.
- Flip the shade frame to access the down cover.
- Insert the bulbs into their respective sockets within the shade frame.
Removing the Down Cover:
- Flip the shade frame to expose the down cover.
- To remove the down cover, locate and release the clamping point holding it in place.
Frequently Asked Questions
Q: Do I need to purchase mounting screws separately?
A: Yes, mounting screws are excluded from the package, so you will need to acquire them separately for installation.
Q: How many bulbs should I get for each shade frame?
A: You will need 13 bulbs for each shade frame. Please ensure to purchase bulbs that fit the specified wattage requirements.
Q: How do I ensure I do not exceed the maximum wattage?
A: Follow the provided wattage guidelines and do not exceed the recommended maximum wattage of 3x15W per fixture.
SYMBOLS
- IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
- Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
- Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
- Do not exceed the maximum wattage.
- The mounting instruction must not be discarded.
- Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
- General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth to gently remove grease or similar stains. Never use any detergents or chemical reagents. Do not switch on the lamp before all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process and is what gives mouth-blown glass its character and organic look. Always clean mouth-blown glass when the glass is cold.
- The lamp is only suitable for connecting directly to the mains.
- IMPORTANT! Nways shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized ellectrical contractor. Contact your local electricity authority for advice.
www.dftpglobal.com
Nonllux NS· 0stre Havnegade 34 ·OK-9000 Aalabong
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>