Hill s AGL3 Pets Behavior Monitoring System User Guide

Hill s AGL3 Pets Behavior Monitoring System

Introduction

The AGL3 device is a behavior monitoring system to help keep your dogs health on track. It is distributed exclusively through veterinarians. AGL3 provides veterinary medical analytics that helps track the effectiveness of a dog’s medical care program. Simply install the sensor and download the user app.

Device Installation

Use the appropriate rubber strap to attach the sensor base pate to the dog’s collar.

Align the pin on the back of the sensor with the hole in the base plate and twist the sensor until you hear it click firmly in place.

Place the collar on the dog, making sure the sensor is below the neck.

Wearables App Installation (iOS)

Existing Users – iOS
The below steps should be followed for all the existing users who are currently using the Vetrax app on an iPhone..

Step 1: Delete the existing Vetrax app

• Place your finger on top of the Vetrax app icon
• After a second you will see the delete icon on the top left side of the app
• Click the delete icon, and it will result in a confirmation pop-up reading ‘Delete Vetrax’ with options ‘Delete’ and ‘Cancel’
• Select the ‘Delete’ option
• The Vetrax app is now successfully deleted from your iPhone

Note – In case the users are not able to remove the app using the above method they can follow an alternate Delete method by accessing the iPhone Settings i.e. Settings > General > iPhone Storage > Select app > Tap ‘Delete app’

Step 2: Install the ‘Wearables app

• Go to ‘App Store’ on your iPhone
• Click on the search icon available on the bottom right, type ‘Wearables’ and Search
• The search results will show the ‘Wearables’ app with the ‘Get’ button beside it
• Click the ‘Get’ button and install the ‘Wearables’ app
• Once installed, enter your Vetrax user id and password to continue to use the ‘Wearables app

New Users – iOS
The below steps should be followed for all the new users being enrolled under the Wearables Clinical Trials program and use an iPhone

Install the ‘Wearables app

• Go to ‘App Store’ on your iPhone
• Click on the search icon available on the bottom right, type ‘Wearables’ and Search
• The search results will show the ‘Wearables’ app with the ‘Get’ button beside it
• Click the ‘Get’ button and install the ‘Wearables’ app
• Once installed, follow the instructions on the app to register and login

Wearables App Installation (android)

Existing Users – Android
The below steps should be followed for all the existing users who are currently using the Vetrax app on an android phone.

Step 1: Delete the existing Vetrax app

• Open the Settings menu on your phone
• Open Apps/Application manager
• Find the Vetrax app and select it
• Tap on the ‘Uninstall’ button
• The Vetrax app is now successfully deleted from your android phone

Step 2: Install the ‘Wearables app

• Open ‘Google Play Store’ on your Phone
• Click on the search icon available in the upper right corner, type ‘Wearables’ and Search
• The search results will show the ‘Wearables’ app with the ‘Install’ button beside it
• Click the ‘Install’ button and install the ‘Wearables’ app
• Once installed, enter your Vetrax app’s user id and password to continue to use the ‘Wearables app

New Users – Android
The below steps should be followed for all the new users being enrolled under the Wearables Clinical Trials program and using an android phone
Install the ‘Wearables app

• Open ‘Google Play Store’ on your Phone
• Click on the search icon available in the upper right corner, type ‘Wearables’ and Search
• The search results will show the ‘Wearables’ app with the ‘Install’ button beside it
• Click the ‘Install’ button and install the ‘Wearables’ app
• Once installed, follow the instructions on the app to register and login

Changing registered email ID

• Goto ‘More‘ menu on the wearables mobile application and select the ‘Account‘ option
• Select the ‘Email‘ field and tap on the existing email ID.
• The resultant screen will show two fields, namely:
  • Email Address: Enter the new email address you would like to set
  • Confirm Email Address: Re-enter the new email address
• Click on the ‘Save‘ button available on the top right to save the new email ID

Changing password

• Goto ‘More‘ menu on the wearables mobile application and select the ‘Account‘ option
• Select the ‘Password‘ field and tap on the existing one shown in an encrypted format
• Resultant screen will show two fields namely:
  • Current Password: Enter the new password you would like to set
  • Confirm Password: Re-enter the new password
• Click on the ‘Save‘ button available on the top right to save the new password

Changing wi-fi network

1. Have your sensor device nearby and ensure the sensor is in ‘awake‘ mode (flashing green light). In case the sensor is in ‘sleep‘ mode, gently shake the sensor.
2. Switch On the Bluetooth on your mobile device
3. Goto ‘More‘ menu on the wearables mobile application and select the ‘Pets‘ option
4. Select the pet by tapping on the pet’s name which will take you to the ‘Pet Details‘ page
5. Tap on the sensor number on the pet details page and you will be directed to the ‘Sensor Information‘ page
6. Tap on the ‘Manage Sensor‘ option on the ‘Sensor Information‘ page
7. Tap on the ‘Change Wi-Fi Network‘ option on the ‘Manage Sensor‘ page and click on the ‘Find Sensor‘ button.
8. The wearables app will now try to connect to the sensor and after post successful connection the user will get a message reading “Sensor Connected”. However, in case the message reads ‚‘Oops… “Could not connect to the sensor. Make sure sensor is nearby”, repeat steps 1 to 6.
9. The wearables app will attempt to fetch all the available wi-fi networks nearby and will show a message reading “Fetching all available wi-fi networks. This might take a while.“ Once fetched, the user will be taken to the next screen containing the following fields:
10. Network name (SSID): Users can enter the name of the wi-fi network they wish to connect to. This field also contains a dropdown that, when tapped, populates all the available 2.4 Ghz wi-fi networks. The user can select any of these networks by tapping on them.
11. Password: The user shall enter the password for the selected/entered wifi network
12. The user can now tap on the ‘Connect‘ button which will connect the user to the wi-fi network

Adding the dog’s image

• Goto ‘More‘ menu on the wearables mobile application and select the ‘Pets‘ option
• Select the pet by tapping on the pet’s name which will take you to the ‘Pet Details‘ page
• Tap on the ‘+‘ button below the image of your dog. The app will prompt you with options ‚‘Photo Library‘ and ‚‘Take Photo‘. After choosing/taking the photo you can adjust the photo to fit the screen and then select ‘Choose‘.
• The system will show a message reading ‘Saving avatar‘, you will be redirected to the pet details page and the dog’s image will be upated.

FCC Compliance Statement

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>