HOUSE OF ROHL INS13114 Single Handle Floor Mount Tub Filler Instruction Manual
- June 15, 2024
- HOUSE OF ROHL
Table of Contents
HOUSE OF ROHL INS13114 Single Handle Floor Mount Tub Filler Instruction
Manual
HELPFUL TOOLS
-
Level
-
Hex Wrench (1/4 and 5/32
-
Safety Glasses
-
Sealant
-
Screwdriver
Parts List
A. Tub Filler
B. Riser Escutcheon
C. Hand Shower
D. Hose
E. Washers (x4)
F. Leveling Screws (x4)
CAUTION — TIPS FOR REMOVAL OF OLD FAUCET:
Always turn water supply OFF before removing existing faucet or disassembling
the valve. Open faucet handle to relieve water pressure and ensure that
complete water shut-off has been accomplished.
-
Remove mud cover from manifold assembly to install tub filler.
-
Slide Riser Escutcheon (B) up the Tub Filler (A).
-
Install Tub Filler (A) to manifold. If pipes are perpendicular to tub: rotate Tub Filler (A) up to 90° so that it faces the tub.
-
Tighten 4 Screws with Washers (E) with 1/4” hex key.
-
Level Tub Filler (A) using 4 Leveling Screws (F).
-
Install the Hand shower (C) onto the Hose (D). Install the other end of the Hose onto the Tub Filler (A). Style varies by model.
-
Open stops and test for leaks. Rotate to open position.
-
Apply sealant to underside of Riser Escutcheon ( B ).
(Note: On models without floor seal, sealant will be used on the riser escutcheon). Slide the Tub Filler (A) to the floor. Ensure the 4 screws are snug to engage the seal. (Note: On some models, ensure to remove protective riser bag). -
Slide Riser Escutcheon (B) to floor.
For warranty or additional information, contact:
US Customers
Canadian Customers
U.S.A.
houseofrohl.com/support
1-800-777-9762
QUEBEC / MARITIMES / WESTERN CANADA
Canadian Customers
ONTARIO
houseofrohl.ca/support
1-800-287-5354
