LUE BONA Escanor Series 18 Inch Dining Chair User Manual

LUE BONA Escanor Series 18 Inch Dining Chair User Manual

Guide of Manual

• Thanks for your choice. We will do our best to provide after-sales service for every customer.
• Please check to make sure all parts are included as stated when you unpack. If there are parts missing or wrong, please contact us, we will expeditiously provide reissue accessories, compensation or other services.
• Instruction should be read carefully. But the manual may not cover every detail of all possible situations and steps. Please contact us if further information and help are needed. We will respond in a timely manner.

Warning

• It s kindly advised to assemble this product on a carpeted floor to protect it from being scratched.
• small parts are included. Please keep the product away from children while assembling. Do not let children play or jump on the product. Do not stand on the item or use as a  step.
• Prior to use, please check to see if there’s any loosening screw or part. Make sure that each screw and part is  retain correctly installed and securely fastened.
• !t’s unnecessary to use any electric drill. Please at a low gear If you need.

Care and Maintenance

• Use a soft, clean cloth that will not scratch the surface when dusting.
• There’s no need to use furniture polish. If you need, test it first in an inconspicuous area.
• Using solvents of any kind on your furniture may damage the finish,
• Never use water to clean your furniture as it may cause damage to the finish.
• Liquid spills should be removed immediately. Gently blot the spill with a soft clean cloth to avoid rubbing.

Further advice about the furniture care

• !tis best to keep your furniture in a climate-controlled environment.
• Extreme temperatures and humidity changes can cause fading, warping, shrinking and spitting of wood.
• we recommend to keep furniture from sunlight exposure to  avoid possible surface damage.
• Proper maintenance and cleaning at home will extend the life of your purchase.
• Following these important and helpful tips will help retain your furniture’s performance even when it ages
•  Periodically (every 90 days) make sure the screws are fully  tightened. .

Parts List

Make sure all the parts are in the package.

1. x1PC Seat

2. x1PC Right Leg

3. x1PC Right Leg

4. x1 pc Support Bar

Hardware List

1. Do not fully tighten all bolls until them haven been installed in corresponding locations.
2. .7+ in below list indicates that additional pieces are replacement parts.

• Axd+1 Bolts M6*22mm

• Bx2+1 Bolts M8*14mm

• Cx2+1 Bolts M6*30mm

• Dx1 Allen Key

Step1
Fix the Right leg (2) to the Left leg (3) with two Bolts (B) by an Allen Key (D)

Step2
Fix the Support Bar (4) to the Chair legs (2)(3) with two Bolts (C) by an Allen Key (D)

Step3
Fix the Seat (1) to the Chair legs with four Bolts (A) by an Allen Key (D) Make sure a high in front and low in back  design of the seat

Step4
Make sure the support bar (4) is behind the chair after installing the seat (1). Installation Completed

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>