TOYZ Dash Tricycle User Manual

June 12, 2024
TOYZ

TOYZ Dash Tricycle

TOYZ-Dash-Tricycle-PRODUCT

Product Information

The Toyz by Caretero Dash tricycle is a modern and high-quality product that complies with EN71 standards. It is designed to provide safe and harmonious growth for your child. The tricycle comes with a list of parts and assembly instructions to ensure proper usage.

For more information about our products, please visit our website: www.toyz.pl. If you have any remarks or feedback about this product, we encourage you to share them with us.

Parts List

  1. steering fork
  2. front wheel
  3. rear wheel
  4. rear basket
  5. front basket
  6. seat footrests
  7. frame footrests
  8. mudguard
  9. brakes
  10. seat
  11. canopy
  12. frame
  13. seat rail
  14. handlebar grip
  15. turning handle
  16. drive kit
  17. seat base

Product Usage Instructions

  1. Place the plastic mounts from the drivetrain on the axle of the front wheel.
  2. Mount the steering fork in the plastic mounts on the wheel. The correct installation will be indicated by a clicking sound.
  3. Insert the pedals into the holes on the sides of the front wheel. The pedals can be mounted in two ways:
    • Freewheel – insert the pedals into the holes and tighten them once.
    • Movable pedals – insert the pedals and rotate them twice while continuously pressing to lock their position.
  4. Mount the rear wheels on the brakes. Attach the brakes to the sides of the rear axle and secure them with screws at the indicated locations.
  5. Mount the rear basket above the rear wheels.
  6. Insert the turning handle into the hole and secure it with a fastener. You can adjust the handle’s length using the buckle.
  7. Disconnect the left and right sides of the safety barrier using the red button in the middle. Place the ends of the barrier into the holes on the sides of the seat. Thread one side of the barrier through the loop on the piece of fabric protruding from the seat. Connect both parts of the barrier together.
  8. Attach the seat to the base mounted on the frame of the tricycle. A click sound indicates proper installation of the seat on the frame.
  9. Press the button located on the side of the canopy. Place both canopy clips into the holes on the seat. Pull up the visor to open it.
  10. Underneath the seat, there is a button that allows you to adjust the seat’s inclination.

Maintenance and Cleaning:
For maintenance and cleaning of the tricycle, please refer to the user manual provided with your purchase.

Safety:
Please ensure that your child wears appropriate safety gear, such as elbow pads, knee pads, and gloves while using the tricycle. Follow all safety guidelines provided in the user manual.

Warranty Limitations :
For warranty limitations, please refer to the user manual provided with your purchase.

WARNING: Please read and follow all warnings provided in the user manual to ensure safe usage of the tricycle.

WARNING: Before assembling the tricycle, please check that all the parts mentioned above are present in the box. If possible, commission a professional bike service to assemble the tricycle.

LIST OF PARTS IN THE BOX

  1. Steering fork: 1 piece
  2. Front-wheel: 1 piece
  3. Rear wheel: 2 pieces
  4. Rear basket: 1 piece
  5. Front basket: 1 piece
  6. Seat footrests: 1 piece
  7. Frame footrests: 1 piece
  8. Mudguard: 1 piece
  9. Brakes: 2 pieces
  10. Seat: 1 piece
  11. Canopy: 1 piece
  12. Frame: 1 piece
  13. Seat rail: 1 piece
  14. Handlebar grip: 1 piece
  15. Turning handle: 1 piece
  16. Drive kit: 1 piece
  17. Seat base: 1 piece

ASSEMBLY INSTRUCTIONS

  • Place the plastic mounts from the drivetrain on the axle of the front wheel.
  • Install the handlebar fork in the plastic mounts on the wheel, correct installation will be signaled by clicking the attached tubes in the holes.
  • Place the pedals in the holes on the sides of the front wheel. The pedals can be mounted in two ways:
    1. freewheel: pedals inserted into the holes and pressed once;
    2. Moveable pedals: by inserting the pedals and turning them twice while pressing the pedal, we lock its position.
  • Screw the seat base to the frame. Install the frame footpegs from below.
  • Install the rear wheels in the brakes. Place the brakes on the sides of the rear axle, fix them with screws in the indicated place.
  • Put the mudguard on the handlebar fork. Place the fork in the hole at the front of the frame.TOYZ-Dash-Tricycle-FIG- \(8\)
  • Install the front basket on the fork, then put the handlebars on top. Make sure the red button locks the handlebars onto the fork.
  • Install the rear basket over the rear wheels. Place the twisting handle in the hole and secure it with the fastener (A). The length of the handle can be adjusted with the buckle (B).
  • Separate the left and right sides of the barrier using the red button in the middle. Place the ends of the side rail into the holes on the sides of the seat. Thread one side of the rail through the eyelet in the piece of fabric protruding from the seat. Connect both parts of the railing together.
  • Install the seat footrests. They should wedge into the holes on the underside of the seat.
  • Install the seat in the base mounted on the bicycle frame. A click means that the seat is correctly installed on the frame.
  • Press the button (C) on the side of the booth. Place both hooks of the canopy in the holes on the seat. Pull the hood to open it.
  • Under the seat there is a button that allows you to change the inclination of the seat.
  • The button on the base of the seat allows you to rotate the seat.

CLEANING AND MAINTENANCE

  • Regular maintenance of the trike in a bike shop is recommended.
  • Please check and adjust all trike parts, especially do the following: tighten loose screws and nuts, libricate moving parts with appropriate lubricants (handlebar bearings etc.).
  • The excess of lubricants should be removed with a clean cloth.
  • Before each use of the trike, please check whether all screws and nuts are tight enough.
  • If any part of the trike gets broken or worn (tires, clamps, bearings), replace them with new.
  • The tricycle should be cleaned with a damp cloth.
  • Never use ammonia-based detergents, oils, solvents and any other strong chemical substances.
  • To lubricate the wheel bearings, please use a dedicated lubricant or teflon oil.
  • After first couple of days of using the tricycle, tighten all screws and nuts.
  • Frequent adjustment of the tricycle’s elements (handlebar clamp etc.) causes slow degradation of these elements. If they lose their original properties, please replace them with new.
  • If any part of the tricycle requires replacing, use only parts supplied by the distributor of the tricycle.

SAFETY

  • Before starting the assembly, please read this manual thoroughly.
  • Maximum user weight for this tricycle is 25 kg.
  • Regularly check and tighten all screws and nuts.
  • To ensure proper safety, the user of this tricycle should wear a helmet, solid shoes, elbow and knee protectors and any other pads that may be necessary.
  • This tricycle is not made for use on roads with car traffic.
  • Never use this tricycle after dark, during rain and snowfall, when the floor is wet and slippery or on loose, gravel surfaces.
  • Never allow for the trike to be used by more than one child at a time.

WARRANTY LIMITATIONS

Warranty does not cover damaging or losing any parts of the tricycle caused by falls, scratches, improper assembly, usage against the guidelines in this manual, careless riding, racing, rough treatment of the trike, not maintaining the trike regularly, using non-original spare parts or additional propelling elements (electrical or standard motors etc.).

Dear Client,
Thank you for choosing this TOYZ product.

We inform you that the base version of this tricycle is designed for use in mild terrain, on traffic-free roads. It may be necessary to adapt this tricycle to conform with the regulations of the road code (lamps, reflex safety lights etc.). It may also be necessary to supply your child with protective equipment (see SAFETY part of this manual).

  1. To ensure safe use of this tricycle, it is very important to check the proper assembly and working of all elements of this product.
  2. Assembly and regular maintenance in a professional bike shop is recommended.
  3. A properly assembled and regularly maintaned tricycle will serve your child longer and better.

WARNINGS

  • Product intended for children aged 1,5-5.
  • Do not allow your child to put small elements of the trike in his/her mouth.
  • Do not overload the tricycle. Maximal user weight is 25 kg.
  • The child should always be supervised by and adult during playing on the trike.
  • The child should be instructed on how to use the tricycle properly before first use.
  • Do not use the tricycle in car traffic.
  • For the safety of the child, remove all plastic bags from the place the child is playing.
  • Never use this tricycle near water reservoirs (rivers, swimming pools etc.) or any other obstacles.
  • Never use in darkness and during bad weather.
  • Before each use please check if all the elements of the trike are properly assembled.
  • Pulling the trike behind a car or any other vehicle is forbidden.
  • This tricycle is designed for one person. It should never be used by more than one child at a time.
  • Do not use the tricycle if any part is damaged or missing.
  • Never use spare parts other than those supplied by the distributor of the trike.
  • Do not allow your child to play near steps and stairwells.
  • The assembly of the trike must be conducted by an adult person.
  • Please supervise that the child never takes his/her hands off the handlebars. Riding without holding the handlebars may cause serious injuries and damages to the child.
  • The child should always wear protective equipment such as a helmet, elbow and knee pads, gloves etc.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals