Bebe Stars 885-P9020 Play Yard Comfort Bunny User Manual

: June 12, 2024
: Bebe Stars

Table of Contents

SAFETY INSTRUCTIONS
INSTRUCTIONS
INSTALLING THE 2nd FLOOR
INSTALLING THE CHANGER
CARE & MAINTENANCE
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bebe Stars 885-P9020 Play Yard Comfort Bunny User Manual

Your child’s safety depends on you. Proper play yard usage cannot be assured unless you follow these instructions.

DO NOT USE YOUR PLAY YARD UNTIL YOU READ AND – UNDERSTAND THESE INSTRUCTIONS

SAFETY INSTRUCTIONS

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

Dear customers,
Thank you for purchasing a Bebe Stars product. Our products are designed for the safety and comfort of your child. The play yard is an ideal solution for those who appreciate quality, modernization and functionality. The product meets the requirements of the safety standards EN 716.

Read the manual carefully and follow its recommendations.

IMPORTANT – keep these instructions for future reference.

WARNING!

This product must be assembled by an adult.
Dispose of or recycle plasticbags after assembly.
Never leave your child unattended.
Make sure all locking devices are connected before each use.
To avoid possibleinjury, make sure your child is removed when opening or closing the product.
Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gasfires, etc. in the near vicinity of the playpen.
Do not use the playpen if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
Do not leave anything inthe playpen or place it close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blinds/curtain cords, etc.
Do not use the playpen when the child is able to get out of it in order to prevent the risk of falls.
This product is suitable for children up to 15kilograms.
The playpen is ready for use only when the locking mechanisms are in place: this operation must be checked before using the playpen.
Do not use more than one mattressin the playpen.
The lowest position is the safest and the base should always be used in that positions assoon asthe babyis old enough tosit up.
Only use the mattress sold with this cot, do not add a second mattress on this one, suffocation hazards.

WARNING !!!
Never leave your child unattended!

INSTRUCTIONS

HOW TO UNFOLD THE TRAVEL COT

Open the bag and take all the parts out.
Unfasten the 3 velcro straps that are around the mattress.
Unfold the travel cot (A).
Grasp the travel cot at the short sides and pull upwards until they are engaged.
Repeat the same process for the longest sides.
Make sure that all 4 sides of the travel cot are correctly engaged then push down the base pressing the centre.
WARNING! Don’t reverse the above steps. It won’t be possible to engage the 4 rails if the centre of the base is down.
Install the mattress on the base (B).

HOW TO FOLD THE TRAVEL COT

Remove the mattress (B) from the base. Grasp the lever (G) in the middle of the base until you reach the unlocking position.
With the lever still rotated (G) pull up the base of the travel cot for about 30 cm
Push the putton (J) in the middle of each side and press down so that all 4 rails fold.
Pull up the centre and gather the unit together.
Wrap the mattress (B) around the travel cot with the soft part inside and close the velcro straps.

INSTALLING THE 2nd FLOOR

First of all correctly open the travel cot. Then attach the support for the bassinet(C) to the rails using the zipper(H).
Insert the 4 tubes (D) in the housings (L) at the bottom of the support and insertthem in one another to fully open the bassinet.
Place the mattress (B) on the base of the bassinet.

INSTALLING THE CHANGER

Place the short tubes labeled “A” or “B” in the structure of the changer, matching each short tube with long one with the same letter. Run each short tube through the hole of the changer fabric after opening the velcro. Once the tubes are attached and set correctly, refasten the velcro.
Install the connectors by passing the strings in the corresponding ttubes of the changer.
Pass all 6 strings on their corresponding holes to fasten the main body of the changer with the frame.
Attach the changer to one side of the playpen. Anchor the changer with the two safety strips.

CARE & MAINTENANCE

This product requires a regular maintenance by the user.
Never force any mechanisms or moving parts; in case of doubt, check the instruction first.
Do not store the product if it is still wet and do not leave it in humid environments since mildew may form.
Store the product in a dry place.
Clean the plastic and metal parts with a wet cloth or with a mild detergent; do not use solvents, ammonia or benzine.
Carefully dry metal parts after any contact with water in order to avoid the formation of rust.
Keep the wheel cleaned removing any presence of dust and/or sand.

No bleach
Do not iron
Do not dry clean
No tumble dryer
Hands washing under 40 degree