YAMAHA HK-050 Grizzly Kodiak 2 Inch Receiver Instruction Manual
- June 13, 2024
- Yamaha
Table of Contents
YAMAHA GRIZZLY/ KODIAK 2” RECEIVER
HK-050 Grizzly Kodiak 2 Inch Receiver
2” RECEIVER
PART # 101280
Hardware Kit: HK-050
Kit Components:
Qty. Part Description
1……………. 2” Receiver
2……………. 5/16”-18 X 1-1/4” X 1-3/4” U-BOLT
4……………. 5/16”-18 NYLOCK NUT
4..…………… 5/16” SAE FLAT WASHER ZINC
1……………. 5/8”-11 X 1-1/2” HEX BOLT GR5 ZINC
1……………. 5/8” USS FLAT WASHER ZINC
1……………. 5/8” LOCK WASHER
INSTALLATION INSTRUCTIONS:
- Place the receiver into location as shown in Figure 1. Line up the hole in the OEM hitch and the threaded boss on the receiver.
- Put the supplied U-bolts around the vertical frame tubes as shown in Figure 1.
- Tighten all Hardware
- Do not exceed recommended tongue or towing weight.
©2016 Copyright Kappers Fabricating, Inc.
All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>