PHILIPS BGP471 LineBase LED Linear Light Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS BGP471 LineBase LED Linear Light
Introduction
LineBase, 19190 lm, 150 W, 740 neutral white, Analog, Safety class I
LineBase is breakthrough lighting for the city tunnel, underpass. It’s a really and amazingly linear lighting yet easy to install, and it’s the ideal solution to replace fluorescent lighting. The customized lumen output of LineBase enables lighting designers to have freedom on lighting layout. Its continuous installation is to create a seamless, brighter, comfortable visual effect with less flicker. Its plug-and-play electrical connection and remote waterproof drivers save total cost of owner. The products pass kinds of safety and durability test to prove a long lifespan on its operation.
Warnings and Safety
- Strongly recommended to use surge protection device in electricity cabinet to wire luminaires
Product Data
General Information
| Driver included | Yes |
|---|
Light Technical
| Luminous Flux | 19,190 lm |
|---|---|
| Luminous Efficacy (rated) (Nom) | 120 lm/W |
| Correlated Color Temperature (Nom) | 4000 K |
| Color rendering index (CRI) | >70 |
| Light source color | 740 neutral white |
| Optical cover type | Polycarbonate Diffuser |
Operating and Electrical
| Input Voltage | 220-240 V |
|---|---|
| Line Frequency | 50 or 60 Hz |
| Inrush current | 44 A |
| Power Consumption | 150 W |
| Power Factor (Fraction) | 0.9 |
| Connection | Connection unit 2-pole |
| Cable | Cable 0.3 m with connector 2-pole |
Temperature
| Ambient temperature range | -40 to +50 °C |
|---|
LineBase
Controls and Dimming
| Dimmable | Yes |
|---|---|
| Control interface | Analog |
Mechanical and Housing
| Housing Material | Aluminum Alloy |
|---|---|
| Optical cover material | Polycarbonate |
| Housing Color | Aluminum |
| Overall length | 960 mm |
| Overall width | 120 mm |
| Overall height | 149 mm |
| Effective projected area | 0.053 m² |
| Dimensions (Height x Width x Depth) | 149 x 120 x 960 mm |
Approval and Application
| Ingress protection code | IP66 [Dust penetration-protected, jet-proof] |
|---|---|
| Mech. impact protection code | IK05 [0.7 J] |
| Protection class IEC | Safety class I |
| CE mark | – |
| Flammability mark | – |
Initial Performance (IEC Compliant)
| Luminous flux tolerance | +/-10% |
|---|---|
| Initial chromaticity | (0.3831,0.3798) 5 |
| Power consumption tolerance | +/-10% |
Product Data
| Order product name | BGP471 LED180 NW 150W G2 A |
|---|---|
| Full product name | BGP471 LED180 NW 150W G |
| Order code | 911401698207 |
| Material Nr. (12NC) | 911401698207 |
| Numerator – Quantity Per Pack | 1 |
| Net Weight (Piece) | 4.990 kg |
| Numerator – Packs per outer box | 2 |
Dimensional Drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
Customer Support
www.lighting.philips.com
2024, January 11 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>