Apps FtyCamPro App User Guide
- June 12, 2024
- APPs
Table of Contents
Apps FtyCamPro App
Product Information
The device in question is a product that operates within the guidelines set
forth by the Federal Communications Commission (FCC) in the United States. It
is designed to comply with part 15 of the FCC Rules, which ensures that the
device does not cause harmful interference and accepts any interference
received. The device has also been tested to comply with FCC radiation
exposure limits for an uncontrolled environment.
Product Usage Instructions
When using this device, please follow the below instructions:
- Do not make any changes or modifications to the device that have not been explicitly approved by the manufacturer. Unauthorized modifications may void your authority to operate the equipment.
- Ensure that the minimum distance of 20cm is maintained between the radiator of the device and your body during installation and operation. This distance helps to comply with FCC radiation exposure limits and ensures safe usage.
App Installation
-
Download and install use App Store and GooglePlay for IOS end Android versions respectively-To to facilitate installation, please see the CR code below to install Fly CamPro. tf your device is unable to connect to GooglePlay, you can scan the APK QR code below.
Note.’You are advised to use or third-party QR code scanner to download the App. The App can not be downloaded by using lhe scanner Of WeChat, -
Click “+” to add a networked camcorder (the name is similar to XXX-nnnnnn-YYYYY).and the device will autornaticany
-
After switching to the WiFi connection page, select the corresponding WiFi hotspot and connect.
After the is successful. return to the APP. and the device is added success faulty. (lf the APP does not automatically add a debit*, Click Search to add the searched device) -
Please fill in the can order name and P2P password(default password: admin). ClickA Yes-.The cæncorder is successfully added. You are advised to modify the P2P password after the camcorder settings are finished.
-
After the camcorder is successfully connected. dick the newly added camcorder for real-time videos. The device canbe controlled on the video interface.
-
Icons and buttons on the video page
-
Other page functions
Camera Settings
- Click the gear button to the advanced page
- Configure the WIFI connection to the Carncorder. Select the WIFI setting to (Ssplay available WiFi hotspots. Select your Wi-Fi password. and press the button-Note:lf the camcorder isin WIFI status after being saved. It will disconnect the current connection for a new WIFI network. which will make the camcorder offline for about a minute in the App.
- SD card recording settings: Set SD card mode and recording.
- .Alarmconfigmation: Enableordisable motiondetectionaJarrn and set the interval for alarms.
Basic Settings and Indicator Status:
A new camcorder is insta•ed in a location. ase reset canworder sedings. (Aner
the is started, press and hold the carder reset button for more than 5
seconds), he resists tumon the AP mode, be WIFI lae.es
Then open phone setings, phone to be AP hotspot (free WIFI network will he
cancer UID), and wait by the phone to WIFI TEtwork before opening the App-
Indicator Status:
-
In AP mode booting, he is O•ays on and in&atcy is the USE power indiütot, and it goes out after faulty
-
When configuring WIFI routing, her doctor is normally on, flicker rapöy, Aft«a successful configuration, the blue indicator is normally on (Please confirm whether the WFi password is
the blue indicator keeps -
The green indicator is a charging indicator, it will automatically go the camcorder fully charged.
Note: Please inspect the following items if the App keeps fibures:
- A. Before Configuring the WFi network, the Cær,corder indicator does rot flicker it is not started;
- B. The phone to connect to the camcorder AP. it is required to connect the phone AP hot spot Of carrarOer:
- C. An ordinary router is compatible, the public copter fails to because it is for authentication:
- D. Avoide any mistake of the network name and password and UID:
- E. Chinese Wifi name password and special symbols are not compatible currently:
- F. 5G Wlfl signals are not compatible
FAQ
Q: Why does APP fall to the camcorder match network?
A: Please ensure the device is correctly connected and inspect whether
the APP operation is restricted.
Q: Why does the camcorder keep asking me b user name and password or why
does it prompt an incorrect user name?
A. The default passed is admin If you forget your username and password.
please reset it to the factory settings to get the default user name and
password.
3Q: H0w can reset the camcorder to factory settings
A. Press the set button for about 5 seconds until the camcorder is
restarted
Q: Why is the image vague
A. Remove the protective film for the lens.lf it’s still vague you can
rotate the lens and focus to get clean images.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ot the FCC Rules. These Ilmlts are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used In accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and Ymir body.