interB r 9016-014.81 3x USB Charging Socket 1 Piece Set Instruction Manual
- June 1, 2024
- interB r
Table of Contents
interB r 9016-014.81 3x USB Charging Socket 1 Piece Set
Operating and installation instruction
- double-USB-charging station Serie 9016
- USB and Socket combination twofold – Serie 9016
Description double-USB-charging station
- USB charging socket, pre-assembled with supply cable, for installation in e.g. Furniture, kitchen
- Danger! Not suitable for installation in kitchen worktops
- Contact protection box, 2m supply cable with Euro flat plug, 2×1,0mm² color white or black
Description USB and Socket with protective contact combination twofold
- USB charging socket + socket with protective contact and shutter, horizontally assembled for installation in e.g. Furniture, kitchen
- Danger! Not suitable for installation in kitchen worktops
- Contact protection box, supply cable 2m with angled plug 3×1.5mm² color white or black
Technical date USB Charger
1x USB A Quick Charge 3.0, 1x USB C Power Delivery 3.0, CE-sign
input voltage 230V 50Hz for both devices must be established
overall Power: 15W max. // Standby: less than 0,3W
Application Notes
- The 9016 series products are for use in dry rooms only. They may be installed in furniture.
- A wall or flush installation is not permitted.
- The socket may be charged max. with 250V – 16A AC – 3.5kW – (IP20 rating).
- The 9016 series may not be used in wet rooms.
- An application with dripping, spraying, spraying or blasting liquids or liquids is forbidden. The items are not allowed to be dipped in liquids.
- Use in EX areas is prohibited. No outdoor use.
- Any repairs can only be done by the manufacturer, or by persons or companies who have been authorized by the manufacturer. Any other procedure releases the manufacturer from any warranty obligation.
ATTENTION
-
Device failure or destruction may be caused by use of incorrect cables and plugs.
Only use approved cables and plugs. -
Device failure may be caused by incorrect insertion of the plug into the socket. The contacts can be damaged.
Only use plug in correct position, upright and without the use of force. -
Device must not be opened: risk of electric shock!
Installation
- remove design frame
- cut mounting hole in furniture and prepare holes for screws (2 mm )
- mount the device, attach with screws, replace design frame
- electrical connection
inter BÄR GmbH + Co.KG, Hälverstr. 43, 58579 Schalksmühle, Tel._ 02355 983-0, www.interbaer.de
Read User Manual Online (PDF format)
Loading......