ReliableStore BQ10 Phone Holder Bluetooth Speaker Wireless Charger User Guide

ReliableStore BQ10 Phone Holder Bluetooth Speaker Wireless Charger

Product Specifications

• Model: BQ10
• FCC ID: 2AQ2W-BQ10

Product Usage Instructions

Unpacking and Setup

When you receive your BQ10, ensure that all the components are included in the package:

• BQ10 device
• Power adapter
• USB cable
• User manual

To set up your BQ10, follow these steps:

1. Connect the power adapter to the BQ10 device.
2. Plug the power adapter into a power outlet.
3. Use the USB cable to connect the BQ10 to your computer or other compatible device.

Charging the BQ10

Before using the BQ10, it is recommended to fully charge the device:

1. Connect the BQ10 to a power source using the provided power adapter and USB cable.
2. The LED indicator on the BQ10 will glow red during charging.
3. Once fully charged, the LED indicator will turn green.
4. Disconnect the BQ10 from the power source.

Pairing with a Device

To use the BQ10 with a compatible device, you need to pair them:

1. Ensure that Bluetooth is enabled on your device.
2. Press and hold the power button on the BQ10 until the LED indicator starts flashing blue.
3. On your device, search for Bluetooth devices and select the BQ10 from the list.
4. Follow the on-screen prompts to complete the pairing process.

Using the BQ10

Once connected and paired, you can use the BQ10 for various purposes:

• Play music: Use the controls on the BQ10 to play, pause, skip tracks, and adjust volume.
• Answer calls: When a call comes in, press the multifunction button on the BQ10 to answer it.
• End calls: Press the multifunction button again to end the call.
• Activate voice assistant: Press and hold the multifunction button to activate your device’s voice assistant (if supported).

Frequently Asked Questions (FAQ)

1. How do I reset the BQ10?
   To reset the BQ10, press and hold the power button for about 10 seconds until the LED indicator flashes red and blue.

2. Can I use the BQ10 while it is charging?
   Yes, you can use the BQ10 while it is charging. However, keep in mind that the charging time may be longer.

3. How do I check the battery status of the BQ10?
   To check the battery status of the BQ10, press and hold both  volume buttons simultaneously. The LED indicator will display the battery level.

Product Description

This product is a multifunctional device, which is not only a wireless charger, but also a holder and a Bluetooth speaker for mobile phones and tablets. A high-performance chip of Bluetooth 5.3 version, gives you a HD quality music. For the wireless fast charging, you can use it horizontal or vertical mode, you can enjoy movies while charging.
This holder is not only retractable, fold-able, compact and easy to carry, but also rotatable and adjustable, brings a more better life to you!

Product Parameter

• Product model: BQ10
• Speaker battery: 1500mah
• Standby time: 600H
• Charging current: 4.2V
• Effective distance: 10 meters
• Key type: Button control
• Speaker driver: 52mm external magnetic horn/3W
• Wireless charging power: 5W/10W/15W
• Speaker working time: play music 4-5H (80% volume of Apple mobile phone)
• Bluetooth audio decoding formats: SBC/ aptX/ aptX HD
• Bluetooth protocol: A2DP/HFP/HSP/AVRCP
• Bluetooth version: 5.0
• Working temperature: 0~45 C
• Charging Port: Type-C
• Input: 20W fast charge adapter
• Charging current: 600MA

Product Diagram

Operation Instructions

Warmly tips:

1. Charging the mobile phone: Connect the Type-C USB charging cable to the stand before charging, and place the mobile phone horizontally on the charging stand to start charging. The red light is always on during charging, and the red light is off when charging is completed.
2. A speaker using the method: long press the power button for 3 seconds, and connect the Bluetooth name “BQ10”.

Safety Instructions

In order to prevent some dangerous situations during usage, please read the safety instructions before usage.

1. Please do not place the product near heating equipment such as heaters, microwave ovens, rice cookers, and high-voltage cookers, to prevent the product from overheating and causing a fire.
2. Please do not drop or hit the product to avoid an explosion.
3. When used by children, please ensure normal operation under adult supervision.
4. Do not use in low temperature and humid environments, please use under the environment of 0-45 C.
5. Do not disassemble or repair the product without authorization.
6. Do not place the product within 20cm of the medical equipment to prevent Device interference from occurring.
7. When not in use, please unplug the product charger from the socket, to avoid draining battery life or causing damage.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

For charging the mobile phone:
This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
FCC ID: 2AQ2W-BQ10
Phone holder Bluetooth speaker wireless charger

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>