tp-link HS200-LA Kasa Smart Wi-Fi Light Switch User Guide
- June 1, 2024
- tp-link
Table of Contents
tp-link HS200-LA Kasa Smart Wi-Fi Light Switch
About This Guide
This guide provides a brief introduction to the Kasa Smart Wi-Fi Light Switch and the Kasa Smart app, as well as regulatory information. Features available in Kasa Smart may vary by model and software version. Kasa Smart availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Kasa Smart experience.
Conventions
In this guide, the following convention is used:
| Convention | Description |
|---|---|
| Teal | Key information appears in teal, including management page text such as |
menus, items, buttons, and so on.
Underline| Hyperlinks are in teal and underlined. You can click to
redirect to a website.
More Info
- Specifications can be found on the product page at https://www.tp-link.com.
- Our Technical Support contact information can be found at the Help Center of the Kasa Smart app and the Contact Technical Support page at https://www.tp-link.com/support.
Introduction
TP-Link Smart Wi-Fi Light Switch is a standard, single-pole, wall light switch that can be controlled via your iOS or Android devices. Control your home lighting or ceiling fans on your phone from anywhere, anytime with the Kasa Smart app. Turn fixtures on and off, set schedules, and even group them with other Kasa Smart devices. The Kasa Smart app provides easy step-by-step installation instructions and convenient remote control from anywhere.
- Voice Control – Use simple voice commands to control your smart light switch with Alexa, Google Assistant, or Samsung Bixby.
- Remote Control – Control anything connected to your smart light switch, like lights, ceiling fans, or other fixtures, from anywhere using the Kasa Smart app.
- Set Schedules – Set lights to automatically turn on and off throughout the day or night whether you’re home or away.
- UL Certified – Housed with V-0 (UL94) flame-retardant material, the smart light switch is UL-listed for safety use.
- Away Mode – Set your smart light switch to turn connected fixtures on and off at random intervals to give the appearance you’re home even while you’re away.
- Delayed Shutoff – Set your lights to remain on for a predetermined period after they are turned off so that you have time to exit the room.
- Easy Installation – The Kasa Smart app includes detailed, easy-to-follow, step-by-step instructions for installation.
- Group & Scene – Group your smart switch with other smart devices to control them all at once. Set custom scenes to match any occasion like waking up.
- No Hub Required – Connect to your existing Wi-Fi router.
Appearance
The Smart Switch is compatible with incandescent, LED, Halogen, and compact fluorescent light bulbs. The switch includes a switch button, an LED, a Restart button, and a Reset button. The following picture uses the white color switch as an example. See the explanation below:
Set Up Your Smart Light Switch
Follow the steps below to set up your Smart Light Switch via the Kasa Smart app.
Download and install the Kasa app
Go to Google Play or the App Store or scan the QR code below to download the
Kasa Smart app on your Android or iOS smartphone or tablet.
Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in. If you don’t have a TP-Link ID,
tap Create Account and the Kasa Smart app will guide you through the rest
.
Add Device
Tap the + button in the Kasa Smart app,
- If your device is white, select Smart Switches > Smart Switch (Wi-Fi).
- If your device is black or almond, select Smart Switches > Smart Switch (BLE). Then follow app instructions to complete setup.
Main Device Controls
After you successfully set up your Smart Light Switch, you will see the home page of the Kasa Smart app. Here you can view and manage all devices that you’ve added to Kasa. Tap your smart switch to control and manage it.
Home Page
Turn on/off your device on the Home page.
Status Page
Turn on/off your device, or set schedules, timer, Away Mode or check runtime
on the Status page.
Set Schedules
Set schedules to automatically turn on/off the light at set times according to
your daily routine.
Set a Timer
Set the timer for your Smart Light Switch to automatically turn on/ off after
the time ends.
Set Away Mode
Set Away Mode for your Smart Light Switch to turn on/off the light
automatically at random intervals while you are away to make the appearance
that someone is at home.
Check Runtime
Check runtime to keep track of how long your Smart Light Switch has been
working.
Manage Device Settings
You can change the name and icon of your smart switch and check its device info.
- Tap Settings on the Status Page to enter the Device Settings page.
Edit device name and icon
You can edit the device name and icon of your Smart Light Switch.
Set default state
Set the state you want your device to turn to when the power cuts off but
returns.
Set auto-off timer
Set a timer to turn off your device after a preset time whenever it is turned
on.
Set delayed shutoff
When delayed shutoff is enabled, the light will remain on for a set amount of
time after you press the switch to turn off. To turn it off instantly, press
the switch once more.
Control your device LED.
Set the LED status.
Check the Groups that your Smart Switch is in.
Check whether your device is added to a group with other devices for
simultaneous control.
Reset Your Smart Light Switch
You can remove your device from the Kasa Smart app on the Home page on the Device Settings page, or by pressing the Reset button on your Smart Light Switch.
Home Page
Long press the fan or the light and then tap . Double confirm it.
Device Status Page
Tap Remove Device. Double confirm it.
Press the Reset button
Press and hold the Reset for at least 10 seconds to restore factory default
settings.
Authentication
FCC compliance information statement
- Product Name: Kasa Smart Wi-Fi Light Switch, Single Pole
- Model Number : HS200
- Responsible party:
TP-Link USA Corporation
- Address: 10 Mauchly, Irvine, CA 926181
- Website: https://www.tp-link.com/us/
- Tel: +1 626 333 0234
- Fax: +1 909 527 6804
- E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter. “To comply
with FCC RF exposure compliance requirements, this grant applies to only
Mobile Configurations. The antennas used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter.” We, TP-Link USA Corporation, have determined that the
equipment shown above has been shown to comply with the applicable technical
standards, FCC part 15. There is no unauthorized change is made to the
equipment and the equipment is properly maintained and operated.
Issue Date : 2024.01.20
Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Safety Information
- Keep the device away from water, fire, humidity, or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
- Operating temperature: 0℃ ~40℃ (32 ℉ ~104 ℉ ); Storage Temperature: -40℃~60℃ (-40 ℉ ~140 ℉ ) Follow all national and local safety regulations and practices. If you are uncertain or uncomfortable when performing the installation, consult a qualified electrician.
- Install only in a suitable UL or equivalent Listed outlet box. (suitable dimensions: W > 2.83in./72mm, H > 1.81in./46mm, D > 3.15in./80mm).
- CAUTION – Risk of electric Shock – More than one disconnect switch may be required to de-energize the equipment before servicing. A circuit breaker that disconnects the Live and Neutral conductor simultaneously is suitable. Ensure power is off at the circuit breaker before removing or installing any wall switch.
- Do not install the Smart Switch with wet hands or when standing on damp surfaces.
- The Smart Switch must be installed and used per the National Electric Code (NEC) or your local electrical code. If you are unfamiliar with these codes and requirements or are uncomfortable performing the installation, consult a qualified electrician.
- The timer could turn on unexpectedly without the user being present. To Reduce the Hazardous Condition – Unplug the appliance from the receptacle before servicing.
CAUTION
The electronic switch integrated in this product is only intended for
functional purposes. De-energized the product at the circuit breaker before
servicing.
CAUTION
To Reduce the Risk of Electric Shock – Use Only Indoors. USE ONLY IN DRY
LOCATIONS. Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at
your own risk.
Explanation of the symbols on the product label
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>