PHILIPS BDP100 LED50 LED Pole Light User Manual

PHILIPS BDP100 LED50 LED Pole Light

TownGuide Performer

BDP100 LED50/830 DW PCF SI CLO 62P
TOWNGUIDE PERF FLAT CONE, LED module 5000 lm, Distribution wide, Polycarbonate bowl/cover frosted, Constant light output, Post-top for diameter 62 mm

The TownGuide Performer family consists of six recognizable, yet modern shapes:
Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED light sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific requirements of your project. All this is combined with a long life expectancy of 100,000 operating hours. In addition, TownGuide Performer has a variety of control system options that can make this luminaire an integral part of smart energy reduction programs. This includes LumiStep, DynaDimmer, LineSwitch standalone-dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with an integrated gland located in the spigot, there’s no need to open the luminaire for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminaire as attractive as possible. And as TownGuide Performer is a dedicated LED luminaire, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.

Product data

General Information

• Lamp family code LED50 [LED module 5000 lm]
• Light source replaceable Yes
• Number of gear units 1 unit
• Driver included Yes
• Photocell –
• Light source engine type LED
• Service tag Yes
• Product family code BDP100 [TOWNGUIDE PERF FLAT CONE]
• Lighting Technology LED
• Value ladder Performance
• Embedded control Constant light output
• Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LEDboard, driver, control units, surgeprotection device, optics, front cover and mechanical parts

Light Technical

• Upward light output ratio 3
• Luminous Flux 2,576 lm
• Standard tilt angle posttop 0°
• Standard tilt angle side entry –
• Luminous Efficacy (rated) (Nom) 70 lm/W
• Correlated Color Temperature (Nom) 3000 K
• Color rendering index (CRI) 80
• Number of light sources 6
• Light source color 830 warm white
• Optical cover type Polycarbonate bowl/cover frosted
• Luminaire light beam spread 50° x 70°
• Optic type outdoor Distribution wide

Operating and Electrical

• Input Voltage 220-240 V
• Line Frequency 50 to 60 Hz
• Initial CLO power consumption 37 W
• Average CLO power consumption 38.5 W
• End CLO power consumption 40 W
• Inrush current 45 A
• Inrush time 0.285 ms
• Power Consumption 40 W
• Power Factor (Fraction) 0.95
• Connection Screw connection block 5-pole
• Cable –
• Number of products on MCB of 16 A type B 10

Temperature

• Ambient temperature range -40 to +35 °C

Controls and Dimming

• Dimmable No
• Driver/power unit/transformer Power supply unit regulating with constant light output
• Control interface –
• Constant light output Yes

Mechanical and Housing

• Housing Material Aluminum
• Reflector material –
• Optic material Acrylate
• Optical cover material Polycarbonate
• Fixation material Steel
• Housing Color Silver
• Mounting device Post-top for diameter 62 mm
• Optical cover shape Conical flat
• Optical cover finish Frosted
• Overall length 570 mm
• Overall width 570 mm
• Overall height 209 mm
• Overall diameter 570 mm
• Effective projected area 0.051 m²
• Dimensions (Height x Width x Depth) 209 x 570 x 570 mm
• Parts colour All parts coloured

Approval and Application

• Ingress protection code IP66 [Dust penetration-protected, jetproof]
• Mech. impact protection code IK10 [20 J vandal-resistant]
• Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
• Sustainability rating Lighting for circularity
• Protection class IEC Safety class I
• CE mark Yes
• Warranty period 5 years
• Flammability mark –
• ENEC mark ENEC mark
• Glow-wire test Temperature 650 °C, duration 5 s
• EU RoHS compliant Yes

Initial Performance (IEC Compliant)

• Luminous flux tolerance +/-7%
• Initial chromaticity (0.43, 0.40) SDCM <5
• Power consumption tolerance +/-10%
• Init. Colour Rendering Index Tolerance +/-2

Over Time Performance (IEC Compliant)

• Driver failure rate at 5000 h 0.5 %
• Control gear failure rate at median useful life 100000 h 10 %
• Lumen maintenance at median useful life*100000 h 91

Application Conditions

• Performance ambient temperature Tq 25 °C
• Maximum dim level Not applicable

Product Data

• Order product name BDP100 LED50/830 DW PCF SI CLO 62P
• Full product name BDP100 LED50/830 DW PCF SI CLO 62P
• Full product code 871829191054100
• Order code 910500991115
• Material Nr. (12NC) 910500991115
• Net Weight (Piece) 6.200 kg
• EAN/UPC – Product/Case 8718291910541
• Numerator – Packs per outer box 1
• EAN/UPC – Case 8718291910541

© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.

www.lighting.philips.com
2024, April 9 – data subject to change

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>