Luminite NX-FFA Fire First Aid Alert User Guide
- June 1, 2024
- Luminite
Table of Contents
Luminite NX-FFA Fire First Aid Alert
Alertex Fire/First-Aid Alert
The Alertex Fire & First-Aid call-point is a battery-powered, wireless critical alert unit. It is fully portable and simple to install. When activated, the unit boasts up to 10 watts of high-quality audio annunciation, paired with bright strobing LEDs.
When the Fire button is pressed, all units on site will play selected audio, and a primary unit will identify which was activated. When the First Aid button is pressed, only the activated unit and the master will sound, however, all units on the same site can repeat the wireless signal. When the alert is cancelled, a new message, such as an ‘all-clear’, will play
Up to 64 Alertex units can be used per site, with a wireless transmission range of up to 1km between units. Each unit can act as a repeater, which helps ensure that event the most challenging sites are covered. Energy efficient design facilitates battery life up to two years with accurate low battery warning.
A typical Alertex system comprises of a designated primary unit and several subordinate units. The primary unit can reset the system post-activation, and initiate site-wide tests. When used with an Alertex IP Bridge, the system can be locally monitored and controlled, or integrated with third-party monitoring platforms such as Webeye. The Alertex portal also enables email alerts, text alerts (requires Twilio accounts), silent testing, and battery status notifications.
Technical Specifications
| Power Requirements | 2 x 3.6 volt Lithium D cells (Not supplied) |
|---|---|
| Battery Life | Up to 2 years with normal usage |
| Low Battery Warning | Flashing LED’s on units and wireless report to IP Bridge |
| Optional External Power | 12 volts DC (Negates the need for the Lithium D |
cells)
Audio Output| Up to 10 watts
Audio Sample Rate| 44.1kHz / 16b samples (CD quality)
Audio Storage| 3 full minutes of high-quality audio (total) which plays in a
continuous loop
Number of Files| 99
Visual Warning| 4 x High power white LED’s strobing in a configurable sequence
Transmitter Power| 10mW at 434.525Mhz (license exempt)
Reception Range| Up to 1km line of sight 32 site codes / 64 unit codes
Site/Unit Codes| i.e. 32 sites within radio range of each other and up to 64
units on each site
Weather Rating| IP66
Temperature Range| -10°C to +60°C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>