IKEA HAMNSKÄR Wash Basin Mixer Tap Black Instruction Manual
- June 1, 2024
- Ikea
Table of Contents
IKEA HAMNSKÄR Wash Basin Mixer Tap Black
Product Information
Specifications:
- Max. Pressure: 1 – 5 bar / 0.1 – 0.5 MPa / 14.5 – 72.5 psi
- Connection Size: G1/2
- Max. Depth: 60 mm / 2 3/8 inches
Product Usage Instructions
Installation:
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
Switching Mixer Tap:
-
1. Switch off the main shut-off valve before changing the mixer tap. - English: Before changing the mixer tap, turn off the main valve.
- Deutsch: Vor dem Auswechseln der Mischbatterie den Haupthahn abdrehen.
Important Note:
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
FAQ
- Q: What should I do if I encounter leaks after installation?
- A: Check the connections for any loose fittings and tighten as needed. If leaks persist, consult a professional plumber.
- Q: Can this product be used with a water pressure above 10 bar?
- A: No, the product is recommended for use within the specified pressure range of 0.1 – 0.5 MPa.
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional.
Tools Required
- Switch off main shut-off valve before changing the mixer tap.
Installation Instruction
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
Before use: Unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes. Then screw the Aerator/Flow Guide back in place. Ensure that it is tight to prevent removal by hand.
Check at regular intervals to make sure that the installation is not leaking.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>