RBOHANT RB1011 Wall Mounted Shower Faucet User Manual
- June 10, 2024
- RBOHANT
Table of Contents
- RBOHANT RB1011 Wall Mounted Shower Faucet User Manual
- Installation Manual
- BEFORE INSTALLATION
- DESCRIPTION
- FLOW
- CARTRIDGE
- STANDARDS
- WARRANTY
- BEFORE INSTALLATION
- INSTALLATION STEPS
- Wall Mounted Bathtub Faucet Installation
- CLEANING CARE
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RBOHANT RB1011 Wall Mounted Shower Faucet User Manual
Installation Manual
BEFORE INSTALLATION
DESCRIPTION
- Solid brass construction
- Premium finish resist corrosion and tarnishing
- Feature a waterfall spout
- Hand shower with back flow protection
- 60″(1500mm)rubber hose included
- Feature a pressure balance valve
- Suitable for wall mounted rough-in installation
FLOW
- Faucet maximum 4 gpm@ 60 psi
- Hand shower maximum 2 gpm(7.6L/min)
CARTRIDGE
- Ceramic disk cartridge
- Pressure-balanced valve
STANDARDS
- Certified to cUPC
- Comply with ASME A112.18.1/CSA B125.1
- ADA Ill for lever handle
WARRANTY
- Lifetime limited warranty against leaks, drips and finish defects from the original date of purchase. (Improper care and cleaning will void the warranty)
- 5-year warranty if used in commercial installations
BEFORE INSTALLATION
- Check the package and confirm all parts are included. If any part is missing or damaged, please contact us.
- .Do not disassemble the main body,as it has been installed & commissioned correctly & precisely before leaving the factory.
- Shut off the main water supply prior to beginning installation.
- Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT).
- Make sure to connect the hot/cold inlet pipe correctly.If standing in front,connect hot water pipe to the left and cold water pipe to the right.
- After the installation,check for leaks and make sure every joint is safely sealed.
INSTALLATION STEPS
This product has been inspected ~ :
1 and debugged by the factory to !:j::¥’ : the best condition. Please do not
N_o ! X :
1 disassemble and assemble it disao~ bhng I yourself.
Before installing the product, CJeaning :
1 please be sure to remove pipes 1
1 sundries and sludge from the 1 : water pipe to prevent sundries “‘ft” :
1 from blocking the product.
Wall Mounted Bathtub Faucet Installation
INSTALLATION MANUAL Tools You will need
-
.Fix the shower valve(A)into the wall, Use a level to ensure that the valve is straight and level.The distance between the bottom of the body and the surface of the tile is 55mm/2.17″.
-
Wrap Teflon tape around the threads and connect hot and cold water supply lines and in-wall pipes(not included) as desired to the valve.Turn on the water supply and open the cartridge to check for leakage. Then, put on the protective cover.
-
Remove the protective cover when the finished wall is completed and install the escutcheon (B) to the valve (A) and press it against the finished wall.Then, install the handle (C) tighten set screws (E)
with Allen key (F), and put on the indication buttons (0)
-
.Turn the water on for 1 minute to flush any debris. Apply Teflon tape (H) to the threaded tail pipe and install the shower hose (1) into the outlet on the wall,Then connect the top shower (P) to
the spout.
-
Turn the water on for 1 minute to flush any debris.Install the tub spout (0) into the outlet on the wall,Tighten set screws (E) with Allen key (F).
CLEANING CARE
In order to keep the appearance of product clean, bright and good ~ ~ performance, please take care of the product as follows;
- Rinse with water only and dry with soff cotton cloth; ACID ♦
- Use mild liquid and colorless glass cleaner to remove surface dirt and scale film, or use polish without abrasive effect;
- Do not use abrasive deterfgent, polish, emery cloth, paper towel or scraper, etc;
- Do not use acid cleaner, or cleaner and soap with insoluble gran etc;
- ln the process of use, mud my accumulate in the bubbler and make the water flow show,
The bubbler can be unscrewed, rinsed with water, and then installed back in place.
Please feel free to contact us if you have any questions. We will help to solvethe issue together with you. OUR EMAIL: services@rbrohant.com
Service Contact:
+1 801-800-9309
services@rbrohant.com
Made in China
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>