INSTALL CENTRIC ICAK12 Amplifier Lightbar Accessory Wiring Kit User Manual

INSTALL CENTRIC ICAK12 Amplifier Lightbar Accessory Wiring Kit

Specifications

• Product Name: Motorcycle/UTV/Boat Amplifier/Lightbar Accessory Wiring Kit
• Model Number: CAKK122
• Manufacturer: Scosche Industries, Inc.
• Power Supply: 12V Battery
• Compatibility: Motorcycles, UTVs, Boats
• Weather Resistance: Yes
• Additional Components Required: Amplifier, Speakers, Stereo Unit, Speaker Wires (not included)

Product Usage Instructions

Tools and Preparation

Before Beginning:

1. Review the guide thoroughly along with the factory service manual for specific removal procedures.
2. Lay out all necessary items and plan the installation before starting.
3. Route the power/ground cable along with existing factory wires.
4. Keep wiring away from moving parts, suspension travel, or extreme heat/moisture sources.
5. Securely fasten cables using cable ties to keep them out of harm’s way.
6. Work in a clean, dry, and level environment.
7. Turn off the ignition switch before starting.

Frequently Asked Questions (FAQ)

• Q: What additional components are required for this kit?
  A: You would need an amplifier, speakers, stereo unit, and speaker wires (not included in the kit).

• Q: Is this kit compatible with all motorcycles, UTVs, and boats?
  A: This kit is designed to work with many but not all motorcycles, UTVs, and boats. Make sure to check compatibility before installation.

• Q: Can this kit be used with other brands besides Scosche?
  A: Yes, this kit can be adapted to work with other brands as long as they have a 12V battery and a stereo source.

• Q: Are additional audio interconnections needed for connecting the stereo unit to the amplifier?
  A: Depending on the stereo unit, additional audio interconnections may be required for the connection between the source unit and the amplifier. These connections are sold separately.

• Q: Where can I find complete warranty details for this kit?
  A: For detailed warranty information, visit www.scosche.com or contact customer service at customerservice@scosche.com or 800-363-4490 x1.

PARTS LIST

13.5ft/4.1 m OFC/CCA 12GA Power Cable with Ring Terminal pre-attached 12ft/3.6m Twisted audio cable

Terminal and cable ties included

13.5ft/4.1 m OFC/CCA 12GA Ground Cable with Ring Terminal pre-attached 12ft/3.6m Remote turn-on lead

NOTE: READ FIRST
This kit is designed for upgrading or expanding the factory audio system/ lighting on many but not all Boats, Motorcycles, Trikes, and UTVs. Use this kit to install a single (small form factor), weather-resistant amplifier or lightbar that is suitable for these applications (Amp and lightbar are not included). This kit may also be adapted to other makes with a 12V battery and stereo source unit. Depending on the particular type of stereo, additional Audio interconnect(s) may be needed for signal connection between the source unit and the amp. Interconnects are sold separately.

For complete warranty details visit us at www.scosche.com or contact us at:
www.scosche.com/contact / customerservice@scosche.com I 800-363-4490 x1 C2019SCOSCHE INDUSTRIES, INC

TOOLS AND PREPARATION

This manual is intended as a guide to installing the included items. When possible, refer to the factory service manual for your specific year make and model for additional technical information. If you are unsure, or cannot access the battery, or capable of route cabling, then we recommend professional installation. The following is a list of common tools and supplies required when performing this installation:

• Socket ratchet set, stanard
• Wire crimpers
• Wire stripper
• Screwdrivers
• Soft protective cloth for painted surfaces
• Electrical Volt-Ohm Meter
• Allen Hex or wrenches, standard
• Eye Skin Protection

BEFORE BEGINNING

1. Review the guide thoroughly after to the factory service manual whenever possible for removal procedures specific to your year/model.
2. Lay out all necessary items and plan your installation before beginning.
3. Route the included power/ground cable with existing factory wires. Use the protective wiring channel if equipped.
4. Keep the new wing away from all moving parts, suspension travel movement or source of extreme heat.
5. Cable ties are included to securely fasten and keep cable/wires out of harm’s way.
6. Work in a clean, dry and level environment
7. Turn OFF the ignition switch’.

LIGHTBAR WIRING DIAGRAM

NOTE

• The use of an inline relay is recommended when using this power kit with any accessories requiring a switch (Switch/Relay not included)
• Lightbar/Switch/Battery and additional wires Not Included. See the Parts List on the cover to see what is included with this kit.
• Amplifier/Battery/Speakers/Speaker Wires/Stereo Unit and additional wires not included. See the Parts List on the cover to see what is included with this kit.

Scan this code first for an installation video

Documents / Resources

| INSTALL CENTRIC ICAK12 Amplifier Lightbar Accessory Wiring Kit [pdf] User Manual
ICAK12 Amplifier Lightbar Accessory Wiring Kit, ICAK12, Amplifier Lightbar Accessory Wiring Kit, Lightbar Accessory Wiring Kit, Accessory Wiring Kit, Wiring Kit, Kit
---|---

References

• Scosche Tech Accessories | #1 Mount Brand in US & Canada
• Contact Us | Get help | Technical and Customer Service Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>