VAXLAMP WWL010 Modern Wood Wall Sconce Installation Guide
- June 1, 2024
- VAXLAMP
Table of Contents
VAXLAMP WWL010 Modern Wood Wall Sconce
Dear user: Thank you for using this product. Please read the instructions carefully for installation.
Tips
To prevent the cable connector from shaking during transportation, please test
the power supply before installation.
Prompts
Please entrust professionals to install it to avoid the danger of electric
shock.
Precautions
- The power supply used cannot exceed the specified range;
- Do not install the lamps on unreliable walls or open spaces;
- Do not install lamps and lanterns above high-temperature objects or on stoves;
- Turn on the power. If the light does not light up, please check whether the cables and connectors are loose.
- Whether the light bulb is in good condition and whether it is in poor contact;
- When there is a problem with the lamp to ensure safety, please entrust a professional to repair it.
Lamp installation steps
- Determine the installation position, align the hole spacing, and fix the hanging plate with expansion screws on the walls
- Connect the main line to the terminal of the lamp body (L is connected to the live wire; N is connected to the neutral wire;
- Install the lamp body, lock it with screws and hang plates from both sides of the chassis, and adjust the light to be on.
Note: Before wiring and power test be sure to turn off the power supply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>