VAXLAMP AWL012 Modern Linear Aluminum Picture/Vanity Wall Light Installation Guide
- June 1, 2024
- VAXLAMP
Table of Contents
VAXLAMP AWL012 Modern Linear Aluminum Picture/Vanity Wall Light
Specifications
- Product Name: Mirror Lights
- SKU: AWL012
- Installation Method: Adhesive
- Power Supply: Ballast Wires
- Installation Time: 48 hours for adhesive to set
Pre-Installation
Clean the wall thoroughly and ensure it is flat. Make sure the adhesive layer is thin yet strong. Avoid thick adhesive layers as they may affect product adhesion. Allow 48 hours for the adhesive to set before proceeding.
Installation Steps for Mirror Lights
- Remove the hanging plate from the lamp body and fix it to the wall.
- Connect the ballast wires to the wall for the power supply.
- Connect the top of the lamp body to the hanging plate using screws.
- After installation, power on the fixture, and it will light up.
Dear user : Thank you for using this product. Please read the instructions carefully for installation.
Instructions for Use
- Clean the wall thoroughly and press flat. Make the adhesive layer thinner and stronger.
- The adhesive layer should not be too thick, or it will affect the adhesion between the product and the wall.
- It is necessary to wait for 48 hours for the adhesive to be applied.
- Dry thoroughly before fixing the lighting fixture. If it is not properly attached the first time, do not apply it again. Scrape off the glue with a blade and reapply.
Kind Reminder
Grey walls, wallpaper, and other walls that are prone to falling off cannot
use nail-free adhesive.
Installation Instructions for Mirror Lights
- First, remove the hanging plate from the lamp body and fix it to the wall.
- Connect the ballast wires to the wall for the power supply.
- Connect the top of the lamp body to the hanging plate with screws.
- After installation, power it on and it will light up.
Punching Installation
- Hole spacing from 8.5 to 9.3cm. Fix the hanging plate by drilling holes with an electric drill.
- Connect the wires to the power supply b ased on colours.
- Tighten the screws to fix the lighting fixture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>