RUGGED RIDGE TJ Body Armor Front Frame Cover User Manual
- June 13, 2024
- RUGGED RIDGE
Table of Contents
RUGGED RIDGE TJ Body Armor Front Frame Cover
Product Information
- Product Name: Body Armor, Front Frame Cover
- Part Number: 11650.10
- Manufacturer: Omix-ADA
- Address: 460 Horizon Dr. Suite 100, Suwanee, GA 30024
- Phone: 770-614-6101
- Fax: 770-614-6069
- Email: info@omix-ada.com.
Product Usage Instructions
- Locate the (4) mounting bolts on the front outer frame of your vehicle (2 per side).
- Using appropriate tools, remove the (4) mounting bolts to detach the stock cover from the front outer frame.
- Take the new Frame guard and position it in place of the stock cover.
- Using the original bolts, secure the new Frame guard onto the front outer frame.
- Tighten the bolts securely to ensure a proper fit.
Note: Ensure that the new Frame guard is properly aligned and centered before tightening the bolts. It is recommended to refer to the vehicle’s user manual for specific instructions related to bolt tightening torque.
Using Instructions
- Remove the (4) mounting bolts located on the front outer frame of the vehicle (2 per side).
- Remove the stock cover and replace with the new Frame guard.
- Reinstall with original bolts.
CONTACT
- 460 HORIZON DR. SUITE 100
- SUWANEE, GA 30024
- PHONE: 770-614-6101
- FAX: 770-614-6069
- info@omix-ada.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>