pTron Fusion Go Wireless Speaker User Guide

June 14, 2024
pTron

Fusion Go Wireless Speaker
User Guide

Important: pTron ‘Fusion Go ’ speaker is set at 50% default volume. You can increase the volume through the Speaker or through the connected device.

Getting Started & Charging:

i. Unbox the Speakers and remove all packaging materials.
ii. Place the speakers on a flat surface.
iii. Connect the Micro USB cable to the charging port on the speaker’s backside, and connect the USB end of the Charging cable to a Power Source such as a USB Charger or other Charging Devices with a 5 volt output.
iv. Charge the speakers fully before initial use for the best battery performance.

Bluetooth Pairing:

i. Turn on the speakers by long-pressing the power key.
ii. The speaker will enter pairing mode automatically. The Bluetooth indicator light will start blinking.
iii. On your smartphone or tablet, enable Bluetooth and search for nearby devices.
iv. When you see “pTron BT speaker” in the list of available devices, select it to pair.
v. Once connected, the Bluetooth indicator light will become solid, indicating a successful pairing.

Note: If no device is connected within 5 minutes after turning on the speaker, the Speaker will automatically turn off.

Basic Operation:

i. Power on/off: Turn on/off the speakers by long-pressing the power key.
ii. Volume control: To increase the sound, long-press the “+” button. and for sound decrease, long press the “-” button.

i. Play/Pause: Press the play/pause button to start or pause audio playback.
ii. Next/Previous track: Press the “+” button once to move to the next song, and press the “-” button once for the previous track when playing music.

Note: The speaker will automatically detect the TF card, Aux cable and USB drive after inserting these devices.

TWS function:
i. This speaker comes with auto-detecting TWS technology, so when two speakers turn on within proximal range, they will automatically connect to each other.

Troubleshooting:

i. If the speakers do not pair with your Bluetooth device, make sure the speakers are in pairing mode and try again.
ii. Check the volume level on both your audio source and the speakers to ensure they are not set too low.

Important: Please use this speaker within a 10 metre wireless range from the connected device

Safety Precautions

  • Please keep this device away from extreme heat, liquids, humidity or corrosive environment.
  • Please don’t over-charge the product as it will decrease the service life of battery.
  • Using incompatible USB cable or high voltage chargers can damage the product & void the product warranty. We strongly recommend using a good quality DC5V-1A chargers & the USB cable included in the package.
  • This product or the Bluetooth function should not be used during charging.
  • Don’t jam the ports such as charger port, LED port, etc.
  • It is recommended to utilize the product below the maximum volume in order to protect your hearing.
  • Please don’t open/temper the product or product’s battery.
  • Please keep the product out of children’s reach.
  • Dispose the product responsibly and adhere to your local authority guidelines.

Packing Box Content
1 Speaker, 1 Micro USB charging cable, 1 User Manual/Warranty QR Card

What is Covered in Warranty?

Customer Care Details:
Mail: [email protected]
Tel: 040 – 67138888
Service Centers List: https://ptron.in/pages/ptron-service-centers

Disclaimer: The colour and specifications shown in or mentioned in the user manual may differ from the actual product. Images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

pTron User Manuals

Related Manuals