SULANG 2A8EE-P2 Wireless Karaoke Speaker Kits User Manual

SULANG 2A8EE-P2 Wireless Karaoke Speaker Kits User Manual

Product information

Exactly

• Model: K Wireless Karaoke Speaker Kits
• Input: DC 5V
• Headphone Jack: Yes
• TF Card Slot: Yes
• Charging Port: DC 5V Type-C USB
• Power Indicator Light: Blue
• Charging Indicator Light: Red
• Material: ABS
• Frequency Response: 100Hz-10KHz
• Signal-to-Noise Ratio: > 115dB
• Total Harmonic Distortion: <1%

Product Use Instructions

Charging Kits

Before using the product for the first time, be sure to fully charge the kits. Connect the DC 5V Type-C USB cable to the charging port of the speaker and the other end to a power source. The red indicator light turns on, indicating that the kits are charging. When fully charged, the red indicator light will turn off.

Speaker Indication Diagram

The speaker has different buttons that serve different functions:

• Long press:  Previous song

• Short press:  Volume adjustment

• Long press:  Power on / off

• Short press:  Play / pause

• Hold:  Next song

• Short press:  Increase volume

• Short press:  Switch Bluetooth/TF Card mode

Using TF Card and Bluetooth Mode

To use the TF Card mode, insert a TF card into the TF card slot. The speaker will automatically detect and play the audio file on the TF card.

To use Bluetooth mode, make sure the speaker is turned on and in Bluetooth mode. Enable Bluetooth on your device and search for available devices. Select the speaker from the list of devices to establish a connection. Once connected, you can play audio from your device through the speaker.

Adjusting the Quantity

To adjust the volume, press the volume buttons on the speaker. A short press will increase or decrease the volume, while a long press will skip to the next or previous song.

FAQ

Q: How do I charge for the kits?
A:  Connect the DC 5V Type-C USB cable to the charging port of the speaker and the other end to a power source. The red indicator light will turn on while charging and turn off when fully charged.

Q: How do I switch between TF Card and Bluetooth mode?
A:  To switch to TF Card mode, insert a TF card into the TF card slot. To switch to Bluetooth mode, make sure the speaker is turned on and in Bluetooth mode, then enable Bluetooth on your device and connect to the speaker.

Q: How do I adjust the volume?
A:  Use the volume buttons on the speaker. A short press will increase or decrease the volume, while a long press will skip to the next or previous song.

To make better use of the product’s performance, please read the user manual carefully.

note  : Please make sure to fully charge the kits before first use.

Speaker Indication Diagram

1. Long press: prev song
   Short press: volume-

2. Long press: power on/off
   Short press: play/pause

3. Long press: next song
   Short press: volume+

4. Short press: Bluetooth/TF
   Switch card mode

5. Headphone jack

6. TF card slot

7. DC 5V charging port

8. Blue indicator light: working indicator light
   Red indicator light: charging indicator light

Mic Indication Diagram

1. Long press: power on/off

   • Short press: microphone volume on/off
   • Double click: play/pause

2. Long press: next song

   • Short press: microphone volume +

3. Long press: prev song

   • Short press: microphone volume –

4. Press and hold: delete the original voice

   • Short press: magical voice switch
   • Double click: switch mic/echo/accompaniment

5. Blue indicator light: working indicator light

   • Red indicator light: charging indicator light

6. DC 5V charging port

7. Type-C USB cable

Bluetooth connection

Mobile Phone Bluetooth Connection

1. Turn on the speaker: long press the power on/off button for 2 seconds to turn on the speaker, and then the Bluetooth indicator light flashes.
2. Bluetooth Connection: Open the Bluetooth setting on the phone, select the Bluetooth named “P2” for pairing, You will hear the prompt sound after connecting successfully
3. Open Karaoke APP to play music.
   note:  Once your mobile phone is connected to Bluetooth. It will automatically connect to the next one because it has a memory function. If you want to disconnect Bluetooth, please cancel pairing in your phone setting

Mic Operating Instructions

1. Turn on the microphone: Press and hold the power button for 2 seconds to turn on the microphone
2. The microphone will automatically connect to the speaker, the blue indicator will flash which means Bluetooth connected successfully.
3. Open your karaoke App or musical player and select songs to sing. Keep the microphone and speaker within 15 meters, it will give better sound effect.
4. If you only want to use the speaker to listen to music, please shutdown the microphone to avoid noise.
5. If the microphone sound is not good or the microphone cannot be turned on, please charge the battery in time.

Billing Description

1. When the battery runs out of power, the product will automatically shut down.

2. Use our USB charging cable to connect to a standard charging plug to charge the battery for the product.

3. Charging time is about 5-6 hours, the red light is automatically off when the product is fully charged.

4. Working time is about 4-5 hours.

Common Malfunctions and Resolve Methods

on the phoneB. Turn up the volume on the speaker
The speaker is not on| The battery has power| A. Charging the battery
Could not connect Bluetooth| It is connected to another phone| A. Bluetooth is disconnected from another phone
Sound distortion| Sound is too loud Battery is too low| A. Turn down the volumeB. Charging the battery
No sound in TF card mode| Do not support special format Do not read the card| A. Change the format of the musicB. Insert the TF card again
The speaker cannot be charged| The charging cable has poor contact with the portThe charging cable is broken| A. Inserting the cable into the port tightlyB. Replace with a new charging cable
No sound with mic| Mic volume is low Mic volume in power off states| A. Increase the MIC volumeB. Turn on the microphone volume
The microphone is not on| The battery is too low| A. Charging the battery
The mic stopped sounding| The battery is too low| A. Charging the battery
The microphone cannot be charged| The charging cable has poor contact with the portThe charging cable is broken| A. Inserting the cable into the port tightlyB. Replace with a new charging cable
Screaming| The microphone is too close to the speakerThe microphone is covered by other objects| A. Adjust the microphone and speaker distanceB. Avoid interfering obstacles

details

• Model Number: P2
• Mic: Dynamic Capacitive
• Speaker :4Ω 6W
• Charging voltage: DC 5V
• Bluetooth version: 5.0
• Material: ABS
• Frequency Response Range : 100Hz~10KHz
• Maximum Sound Pressure Level: >115dB 1Khz THD <1%
• Sound Mode: Reverb Mode
• Rechargeable Battery : 18650 battery

Warning:

1. If the engine appears smoke or other abnormal phenomena, please contact our after-sales service for assistance
2. If the inside of the machine is affected by rain or damp, please put the machine in a ventilated place to dry.
3. Do not cook the machine at high temperature, otherwise it may cause a risk of burning the machine or damage the internal parts of the machine.
4. This product should not be exposed to excessively hot environments, such as sunlight, fire or inflammation.
5. Do not throw the machine, to avoid fall damage,
6. If consumers use a power adapter for power supply, please use a qualified power adapter with standard certification

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>