MATO EDO777450 LED Ceiling Light Instruction Manual
- June 1, 2024
- MATO
Table of Contents
MATO EDO777450 LED Ceiling Light
IMPORTANT for Use
Read the entire manual carefully.
- Install this product indoors only.
- Installation should be performed by a qualified electrician.
- Turn off the power before installing.
- Use screws and plugs suitable for the material.
Failure to observe the above may result in a short circuit or electric shock. Thara is a dangar to life!
INSTALLATION
- Switch off the power for the connection cable.
- unscrew the mounting plate from the downlight housing.
- Insert the connection cable through the centre hole in the backing plate.
- Depending on the material of the mounting surface, mark and pre-drill the mounting plate or screw it on directly.
- connect cable to the terminal block.
- Push out the inner rotating ring of the downlight housing.
- Insert the LED module and push the inner ring back into the downlight housing.
- Connect LED module cables to the terminal block.
- screw the downlight housing onto the mounting plate.
- Turn and swivel the spotlight in the desired direction as required.
- Well done, enjoy your new lighting!
Scan for the International instruction manual
or visit us:
www.mato-lighting.com/manuals
Technical Data
- Model LF-R-001
- Input voltage 230V AC, 50/60 Hz
- Maximum Performance 15watt
- Material Aluminium, coated
- Lamp socket Direct connection
- Product dimension 08O x 5Omm
- Protection type IP20
- Protection class SKI
Light source available separately
MATO recommends LED modules with a diameter of 50mm and a maximum height of
25mm.
Care Instruction
Simply wipe with a dust cloth.
Disposal
Please dispose of old devices and appliances at a designated collection point.
For damage caused by Improper use, the manufacturer or dealer assumes no
liability.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>