TURTLE BEACH PS4 Recon 200 Gen 2 Amplified Gaming Headset User Guide

TURTLE BEACH PS4 Recon 200 Gen 2 Amplified Gaming Headset

PACKAGE CONTENTS

1. Recon 200 Gen 2 Headset ( A )
2. USB-C Charging Cable ( B )

A Recon • 200 Gen 2 Headset Casque Recon”‘ 200 Gen 2

B US 8- C: Charging Cable Cable de chargement USB- C

HEADSET CONTROLS

1. Master Volume
2. Mic Monitor Volume
3. Power LED
   •  Solid Green – Headset On
   • USB Connected
   • Red – Headset Off + Charging
   • Amber – Headset On + Charging
4. USB-C Charging Port
5. Mic Mute
   • Flip up mic to mute. Flip mic down to unmute.

SETUP FOR XBOX

XBOX VOLUME SETUP

1. Plug the headset into the Xbox controller.
2. While in the Home screen, press the Xbox button on the controller. Scroll down to the buttons on the bottom of the left sidebar, and then select the speaker icon (Audio & Music).
3. Configure your settings as shown:
   • Set Headset Volume to Maximum
   • Set Headset Chat Mixer to the Middle Setting
   • Set Mic Monitor to Minimum

XBOX SURROUND SOUND SETUP

1. While in the Home screen, press the Xbox button on the controller.
2. Navigate to the Profile & System tab and select “Settings”.
3. Go to General >> Volume & Audio Output.
4. In the Headset Audio column (right side of screen), set Headset Format to Windows Sonic For Headphones.

SETUP FOR PLAYSTATION

1. Go to Settings >> Sound >> Audio Output >> Output Device
2. Select Controller Headset for Output Device
3.  Go to Settings >> Sound >> Volume >> Headphones
4. Set Volume Control (headphones) level to Maximum
5. Adjust your microphone levels by going to Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level

*As desired, go to Adjust 3D Audio Profile and enable the 3D Audio Function to enhance the audio through your headset.

SETUP FOR PC/MAC, MOBILE, TABLET, AND NINTENDO SWITCH

PC/MAC

If your PC uses separate jacks for headset audio and mic audio, you will need a PC Splitter Cable.

MOBILE, TABLET

No additional setup is required for mobile use.

NINTENDO SWITCH

This headset is only supported through connection to Nintendo Switch’s 3.5mm headset jack, while the Switch itself is in the handheld mode (not docked mode).

CHARGING

The Recon 200 Gen 2 gives you 12 hours of amplified audio with the rechargeable battery. Make sure to charge it regularly!
If your battery dies, you will still be able to use the headset for passive game audio.
Microphone may not function without the power in all configurations. To ensure full functionality, please keep your headset charged.

Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113F°/45°C

PROSPECS GLASSES FRIENDLY DESIGN

Originally created for the Elite Pro Tournament Gaming Headset, Turtle Beach’s exclusive ProSpecs glasses-friendly technology is built into the Recon 200 Gen 2, featuring an advanced ear cushion design and materials that allow gamers who wear glasses to finally play in comfort.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>