TURTLE BEACH TBS-0710-05-QSG-E Stealth Ultra Wireless Controller User Guide
- June 1, 2024
- TURTLE BEACH
Table of Contents
TURTLE BEACH TBS-0710-05-QSG-E Stealth Ultra Wireless Controller
CONTENTS & PRODUCT TOUR
A Adjustable trigger locks
B USB cable port
C Command display
D Guide button Press (2s) = power on/of
E Connection LED
F Input focus button
G Headset port
H Mappable action buttons
I Rapid charge dock
J USB-C cable port
K Transmitter USB port
L Wireless transmitter
M Transmitter connection LED and pairing button
N 3m USB-C to USB-A cable
O 4x Thumbstick grip caps
P Carry case
SETUP FOR XBOX
SETUP FOR PC
COMMAND DISPLAY MAIN MENU
Make in-depth adjustments via the Main Menu.
Switch focus to the COMMAND DISPLAY then press to access the main menu.
A Open main menu
B Previous menu item
C Next menu item
D Adjust feature
E Back/cancel
F Select/accept
Press to return focus to the game.
COMMAND DISPLAY DASHBOARD
Make quick adjustments via the DASHBOARD.
Press to switch focus to the COMMAND DISPLAY.
A Profile –
B Profile +
C Open main menu
D EQ cycle
E Social feed
F Mic mute
G Chat mix +
H Chat mix –
I Volume +
J Volume –
Press to return focus to the game.
CONTROL CENTER 2
Search for Stealth Ultra and Control Center 2 app on Microsoft Store, Play Store and App Store. Keep your controller up to date and customize performance settings on Xbox and Windows. Tune on board memory profiles and configure social notifications on Android and iOS.
-
Initiate APP LINK pairing from the COMMAND DISPLAY main menu.
-
Pair to your mobile smart device.
-
Launch the Control Center 2 app.
CHARGING
When battery level is low, controller LEDs will flash red.
-
Use the dock to charge the controller. Controller LEDs will turn green when it is fully charged.
-
Or use the USB cable to Play & Charge. In this mode, STEALTH ULTRA will function as a wired device.
Regulatory Compliance Statements for the Stealth Ultra
Local Restrictions on Radio Usage
Caution: Due to the fact that the frequencies used by wireless devices may not
yet be harmonized in all countries, these radio products are designed for use
only in specific countries, and are not allowed to be operated in countries
other than those of designated use. As a user of these products, you are
responsible for ensuring that the products are used only in the countries for
which they were intended and for verifying that they are configured with the
correct selection of frequency and channel for the country of use. Any
deviation from the permissible power and frequency settings for the country of
use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a
specific country, please check to see if the radio type number that is printed
on the identification label of your device is listed in the manufacturer’s OEM
Regulatory Guidance document at the following URL
http://www.turtlebeach.com/homologation or contact Turtle Beach directly.
Federal Communications Commission (FCC) Compliance Notices This section includes the following FCC statements for the Stealth Ultra:
- Non-Modification Statement
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
FCC Caution
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The product is a low power device and its output power is lower than FCC SAR
exemption level.
IMPORTANT NOTE: In the event that this condition cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation..
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Radiation Exposure & Hazard Statements
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
co-located or operating in conjunction with any other antenna or transmitter.
RF warning for Portable device
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Non-Modification Statement
Use only the supplied Internal antenna. Unauthorized antenna’s, modifications,
or attachments could damage the Stealth Ultra and violate FCC regulations. Any
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. Please
contact Turtle Beach for a list of approved 2.4 GHz antennas.
Innovation, Science and Economic Development Canada (ISED) Compliance Notices This section includes the following ISED statements for Stealth Ultra:
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
IC: 3879A-VOSTICK
Industry Canada statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF Radiation Exposure & Hazard Statement
The product complies with Canada portable RF exposure limits set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
European Union and European Fair Trade Association (EFTA) Regulatory
Compliance
This equipment may be operated in the countries that comprise the member
countries of the European Union and the European Fair Trade Association. These
countries, listed below, are referred to as The European Community throughout
this document: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC,DENMARK,
ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA,
LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA,
SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN,
NORWAY, Switzerland’s.
Declaration of Conformity
Marking by this symbol:
declares that this product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
UKCA Conformity
Radio Equipment Regulations 2017 (S.I. 2017/1206)
Operating frequency range:2402-2480MHz
Max power:-0.99dBm
This equipment meets the following conformance standards:
FCC PART15B
FCC47 CFR Part 15:2019TPCH(2021-2)
10 C.F.R. section 430.23(aa); Appendix Y to Subpart B of Par
ENERGY STAR Draft Test Method for Computers, Rev.
October 2019,California Code of Regulations, Title 20, Division 2, Chapter
CPSIA/H.R. 4040 Sec.108, CPSIA/H.R. 4040 Sec.101
EN 55032, EN55035
EN71-1,EN71-2,EN71-3
EN300328, 301489, 62479EN62368
REACH Regulation (EC) No 1907/2006 SVHC 235
Total Cadmium Content (Entry 23 of REACH Annex XVII)
IEC 62321-7-2:2017,
IEC 62321-8:2017,
IEC 62321-4:2013+A1:2017,
IEC62321-6:2015,
IEC62321-5:2013,
94/62/EC Toxic Elements in Packaging
Polycyclic Aromatic Hydrocarbons (PAHs) (Entry 50 of REACH ANNEX XVII)
BPA (toy<3 or intended for place in the mouth)
IC RSS-247 Issue 2 Feb.2017
Canada IC test for toy with IC (ICES-003)
NRCAN, Appendix Z to Subpart B of Part 430
AS/NZS CISPR 32:2015+A1:2020
BS EN IEC62368-1:2012+A11:2020
USB 2.0 Full Speed Test
Bluetooth Certification
Please visit the following URL for a complete copy of the Declaration of
Conformity:
http://www.turtlebeach.com/homologation
This symbol on the product or its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment
at the time of disposal will help conserve natural resources and ensure that
it is recycled in a manner that protects human health and the environment. For
more information about where
you can drop off your waste for recycling, please contact your local
authority, or where you purchased your product.
Veteran Turtle Beach Inc. is obligated as a producer with a main activity of
selling under The Producer Responsibility Obligations (Packaging
Waste)Regulations 2007. To fulfil our obligation we are
registered with Comply Direct and their Recycling Room. Here you will find
advice and information on packaging waste management, recycling symbols and
the waste hierarchy principles of reduce,
reuse and recycle.
https://www.complydirect.com/the-recycling-room/
Attention
Type-C output port is only used for data transmission, not for output on-load.
Attention
To avoid risk of fire, please just connect the product to an power supply of
which output capability is less than 15W.
Portable device
Radiation Exposure Statement: The product comply with the Canada portable RF
exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual.
The further RF exposure reduction can be achieved if the product can be kept
as far as possible from the user body
or set the device to lower output power if such function is available.
CUDTOMER SUPPORT
Any questions?
www.turtlebeach.com/support
Please register your product to receive important updates.
www.turtlebeach.com/productregistration
For warranty, visit:
www.turtlebeach.com/warranty
Points de collected sur
www.quefairedemesdechets.fr
