TURTLE BEACH XBOX Recon 50X Stereo Gaming Headset User Guide

TURTLE BEACH XBOX Recon 50X Stereo Gaming Headset

IMPORTANT
PLEASE MAKE SURE YOUR HEADSET IS UPDATED WITH THE LATEST FIRMWARE.
Connect to the Turtle Beach Audio Hub for Windows or Mac® to update firmware.turtlebeach.com/audiohub

CONTENTS

Stealth™ 600 Gen 2 Headset

USB-C Charging Cable

HEADSET CONTROLS

SUPERHUMAN HEARING®

Use Superhuman Hearing® Mode to pinpoint quiet audio cues like enemy footsteps and weapon reloads.
During gameplay, you can activate and deactivate Superhuman Hearing® by pressing the POWER button once, quickly.

EQ PRESETS

• Signature Sound
• Bass Boost
• Bass + Treble Boost
• Vocal Boost

SETUP FOR XBOX

For new Xbox console setup instructions, go to: turtlebeach.com/Xboxsetup

COMPATIBLE WITH

• Xbox Series X
• Xbox One
• COMPATIBLE WITH | COMPATIBLE CON Windows 10 with Xbox Adapter, sold separately

SURROUND SOUND FOR XBOX (ONLY AVAILABLE ON XBOX)

1. Go to Settings > General > Volume & Audio Output
2. Set Headset Audio to Windows Sonnic for Headphones

For updated setup instructions visit: turtlebeach.com/sonic

CHARGING

The Stealth™ 600 Gen 2 gives you 15 hours of rechargeable battery life. Make sure to charge it regularly before storing.

Headset Storage
Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.

HEADSET LED

SETUP FOR PC USE

SYNCING YOUR HEADSET (XBOX WIRELESS ADAPTER)Xbox Wireless Adapter not included

SYNCING YOUR HEADSET (BUILTIN XBOX WIRELESS)

1. On your PC, go to Settings > Devices > Connected Devices.

   • Choose Add a device. Windows searches for the headset.

2. Press the connect button on your headset. Windows finds and adds the headset.

3. When your Stealth™ 600 headset appears in the list under Other devices, it is ready to use.

4. Configuring your settings > On the Windows Taskbar, right-click the Speaker Icon,
   Select Playback Devices

   • Set TURTLE BEACH Stealth 600™ as your default device.
   • Select Recording Devices, Set TURTLE BEACH Stealth 600™ as your default device.

Regulatory Compliance Statements for the Stealth™ 600X Gen 2

Local Restrictions on 802.11a, 802.11b, 802.11g and 802.11n Radio Usage

Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g and 802.11n wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n products are designed for use only in specific countries, and are not allowed to be operated in countries other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country of use. Any deviation from the permissible power and frequency settings for the country of use is an infringement of national law and may be punished as such.
To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer’s OEM Regulatory Guidance document at the following URL: http://www.turtlebeach.com/homologation or contact Turtle Beach directly.

Federal Communications Commission (FCC) Compliance Notices
This section includes the following FCC statements for the Stealth™ 600X Gen 2:

• FCC ID: XGB-TB2315
• Class B Interference Statement
• RF Radiation Exposure & Hazard Warning
• Non-Modification Statement
• Unlicensed National Information Infrastructure Bands Operation Statement

Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Radiation Exposure & Hazard Statement
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the device will be greater than 2 cm (0.8 in.) from all persons. Using higher gain antennas and types of antennas not covered under the FCC certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Non-Modification Statement
Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the Stealth™ 600X Gen 2 and violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Please contact Turtle Beach for a list of approved 2.4 GHz and 5.0 GHz antennas.

Exposition aux radiations RF & Mention de danger
Pour assurer la conformité avec les exigences RSS-102 d’exposition aux RF (Radio Fréquences), cet appareil doit être installé dans un endroit ou l’antenne de l’appareil sera située à une distance de plus de 2 cm (0.8 po) de toutes personnes. L’utilisation d’antennes à gain plus élevé et les types d’antennes qui ne sont pas couverts en vertu de la certification IC de ce produit n’est pas autorisée. Les installateurs de la radio et les utilisateurs du produit final doivent se conformer aux instructions d’installation fournies dans ce manuel. Cet émetteur ne doit pas être co-implanté ou exploité en conjonction avec toute autre antenne ou transmetteur.

Deployment Statement
This product is certified for indoor deployment only in the 5150-5250 MHz band. Do not install or use this product outdoors in that frequency band in Canada.

European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE,, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND

Declaration of Conformity
Marking by this symbol:
indicates compliance with the Essential Requirements of the Radio Equipment Directive (RED) of the European Union (2014/53/EU). This equipment meets the following conformance standards:

Safety:

• EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 + A2: 2013 (T-Mark License),
• IEC 60950-1: 2005 (2nd Ed.) + Am 1: 2009 + Am 2: 2013 (CB Scheme Certificate),
• EN 62368-1: 2014 + A11 (T-Mark License),
• IEC 62368-1: 2014 (CB Scheme Certificate),
• EN 50332-1: 2013, EN 50332-2: 2013, EN 71-3: 2013

Additional licenses issued for specific countries available on request
EMC:

• EN 55032: 2015, CISPR 32: 2015,
• EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2016-11)
• EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-8: 2010

The products are licensed, as required, for additional country specific standards for the International Marketplace. Additional issued
licenses available upon request.
Radio: EN 300 328 V2.1.2 (2019-07), EN 301 893 V2.1.1 (2017-05)
SAR: EN 62311: 2008
Environmental : RoHS 2015/863 amending Annex II to 2011/65/EU, WEEE 2012/19/EU, REACH 2006/1907/EC, Packaging 94/62/EC, Battery 2006/66/EC, Toys Safety Directive 2009/48/EC
Warning! This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take appropriate measures.

National Restrictions

• Indoor Operation The Stealth™ 600X Gen 2 operates in the 5150 to 5350 MHz frequency band and is restricted to indoor use only!
• Antenna The Stealth™ 600X Gen 2 has integrated antennas which cannot be replaced.
• Power Level Control The Stealth™ 600X Gen 2 does not allow for customized power level control.
• Operating Frequency The operating frequency of the Stealth™ 600X Gen 2 is determined by the host console system. As such, it is important that the host console system is correctly configured to meet the local regulations.

This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations (Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you will find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce, reuse and recycle. https://www.complydirect.com/the- recycling-room/
Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homologation
Mexican IFT-008 Compliance Statement

To access the rating label:

1. Remove the left ear pad by pulling the ear pad straight up using your thumb.
2. Once you’ve released the cloth from the lip on top, pull the ear pad straight back and it should slip right off.

To replace the ear pad, follow the same process in reverse.
Not seeing what you’re looking for here?
Visit turtlebeach.com/support for the latest Tech Support information.

References

• Turtle Beach Support
• Turtle Beach® Audio Hub - Download Firmware Updates for PC & Mac
• Windows Sonic & Dolby Atmos Compatible Headphones – Turtle Beach®
• Turtle Beach Support
• Turtle Beach Support
• Recycling Room - Beyondly

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>