EMERSON CKSW5010 Alarm Clock FM Radio Instruction Manual

EMERSON CKSW5010 Alarm Clock FM Radio Instruction Manual

Selecting the Alarm Week Mode

Your SmartSet® clock radio allows you to select from three different alarm week modes for each alarm. The Alarm Week Modes are:

• Everyday -the alarm will turn on all 7 days
• Weekdays only -the alarm will only turn on Monday through Friday
• Weekends only – the alarm will only turn on Saturday and Sunday
• If all 7 indicators are ‘On’, the Everyday mode is selected.
• If only the MON (Monday) through FRI (Friday) indicators are ‘On’, the Weekdays only mode is selected.
• If only the SAT (Saturday) and SUN (Sunday) indicators are ‘On’, the Weekends only mode is selected.

Checking the Wake Up Times and Alarm Week Mode
To check the wake up time or the alarm week mode settings, press either the AL 1 or AL2 button. The display will change from current time to wake up time and the DAY OF WEEK indicators will show you the alarm week mode which is currently selected. It will return to the current time display in 3 seconds after showing the wake up time.

Activating and Deactivating the Alarm

• Press and release the AL 1 or AL2 button continuously to turn On your desired Alarm Mode: Wake to Radio, Wake to Buzzer, or Off.
• When the ‘ indicator glows, the wake up to Radio alarm will be On.
• When the ‘ Indicator glows, the wake up to Buzzer alarm will be On.
• To completely turn Off the alarm, press and release AL 1 or AL2 button continuously until the Radio indicator or the Buzzer indicator is Off.

Snooze Alarm

When the alarm comes On, press the SNOOZE button to pause it for 9 minutes.
Alarm indicator will flash during Snooze Alarm mode. To turn off Snooze Alarm, press the ON/OFF button once.

Note : If not turned off, the Snooze Alarm will only be active for one hour.

Listening to FM Radio

• Extend the antenna wire fully and orient it for better FM reception.

• Press the ON/OFF button to turn the unit from Standby mode to On.

• Press the MODE button repeatedly until the MHz indicator turns ‘On’, and the FM station frequency displays.
  Set the Volume by pressing the VOL+ or VOL- button to a level that suits your needs.

• When you finish listening to radio,press the ON/OFF button to turn the radio Off. The MHz indicator will then turn ‘Off’.

Receive your desired station with the TUNING control:

• Press the button briefly, the receiving frequency will increase/ decrease by one step.
• Press and hold the button for 3 seconds then release, Auto Station Seeking will be engaged, the receiving frequency will increase/ decrease automatically until a station with acceptable reception is found.

Storing and Recalling Radio Station Memory Manually

When you have a few favorite radio stations to listen to, you may like to save them in specific memory locations and pick one of them in a few seconds without the need of searching it each time. Our digital tuning technology allows you to do this easily by following the steps listed below:

Storing Station to the Memory

• Turn the unit On and select Radio mode ( MHz indicator ‘On’).
• Tune in the desired station by the TUNING control as described.
• Press and hold the FM MEM./STO. button (for 2 seconds)until ‘PXX’ blinks, indicating the memory location to store the station currently tuned in.
• While ‘PXX’ is blinking, press the button can change the memory location from 1 through 20. For example, ‘P 03’ means the current listening station is about to be stored into the 3rd location of the memory.
• After deciding the memory location, press the FM MEM./STO. button again, the currently listening station is then stored accordingly.
• The display will show the frequency of the station, and after a few seconds, it will restore the current time.

Recalling Station from the Memory

• Turn the unit On and select Radio mode.
• Press the FM MEM./ STO. button, ‘PXX’ shows on the display, and the station according to the memory location will then be tuned in.
• Repeatedly pressing the FM MEM./STO. button or the button will change the memory location from 1 through 20, and the station stored in the location will then be tuned in once the memory location is selected and all buttons released.
• The display will show the frequency of the station, and then returns to the current time after a few seconds.

Listening to Bluetooth Speaker

• Press the ON/OFF button to turn the unit ON.
• Press the MODE button to select Bluetooth(bt) mode (BT indicator ‘Flashes’ for pairing).
• Enable your Bluetooth device and select CKSW5010 from its Available/Paired device list. If pairing successful, the unit will prompt and BT indicator will become solid.
• Automatic connection with your Bluetooth devices is possible if they have been paired successfully with this unit before.
• After paired, you can play your music through this Bluetooth Speaker.
• Press briefly the button can pause or resume playback streaming over your Bluetooth device.

Note:

• If pairing unsuccessful, all previously paired Bluetooth devices around should be disconnected first by pressing and holding the HI button until it prompts, or turn Off their Bluetooth connection, in order to avoid making any auto reconnection between them. Then, set this unit to Bluetooth mode, and tap the Bluetooth switch on your phone/device Off and back On again to refresh/search any nearby CKSW501 O for pairing.
• When it connects to an iOS device via Bluetooth, the clock time will be automatically synchronized with the time of the connected device.

Sleeping to Music Timer

Press the ON/OFF button to turn ON the unit, and press the MODE button to select either FM Radio, Bluetooth mode to play music or listen to radio

• Press the SLEEP button. The display will show the sleep timer.

• Press the SLEEP button repeatedly to choose your desired sleep timer (10-90 minutes or OFF). When sleep timer is counting down, the SLP indicator turns On.
  Note : When you change the sleep timer from the 10-minute default timing to a different setting, this new setting becomes the default timing.

• To display the sleep timer during count down process, press the SLEEP button.

• To cancel the sleep timer during count down process, press the ON/OFF button to shut Off the unit.

Ultra Fast Wireless Charging

An Ultra Fast Wireless Charging Pad is built on top of this unit for wireless power transfer to any Qi-compatible smartphones or Qi-enabled receivers over a vertical distance of not more than 0.2 inches (5 mm).

1. Place your Qi-compatible smartphone on top of the Wireless Charging Platform.
   The center of your smartphone must be postitioned properly right at the middle of this charging platform in order to maximize the charging efficiency.

2. While wireless charging started or detected, the “” indicator will be flashing ‘Red’ slowly.

3. To make sure wireless charging performs properly, check the charging icon and/or charging message displays on your smartphone.

4. While your smartphone is fully charged, the –., indicator will turn solid ‘Cyan’. Please also check the charging icon and/or charging message on your smartphone to ensure it is fully charged, then remove it from the wireless charging platform.

Note:

• This wireless charging platform works with Qi-compatible device including 7.5 Watt iPhone 15/14/13/12/11/XS Max/XS/XR/X/8 Plus/8, 10 Watt Galaxy S10 Plus/ S10E/S10/S9, 15 Watt Galaxy S23,S22, S21, S20 and 5 Watt-15Watt all Qi-enabled phones.
• Wireless charging may not work properly if the protective case or accessory placed at the back of your smartphone is thicker than 0.2 inches (5 mm), remove the protective case or accessory before placing your smartphone (screen facing upward) on the wireless charging platform.
• Do not place any foreign objects, such as coins, keys, metallic objects, magnets, and magnetic stripe cards, between your smartphone and the wireless charger, to avoid interference or overheating. While wireless charging error occurred, the –., indicator will be flashing ‘Red’ rapidly to alert user to get the erroneous receiver removed.

Charging the Wireless Charging Earbuds

Put the wireless charging earbuds on the wireless charging earbuds pad, the charging indicator of the earbuds will light up, and leave it till the lights indicate it is fully charged.

Charging the Watch

1. lnsert the charging cable (not included) into the watch holder provided, at the back of the unit.
2. Plug it into the USB port at the back.
3. Hang your Apple Watch or Samsung Watch on the charging cable and aligns it properly.

You hear a chime when charging begins (unless your Apple Watch is in silent mode) and see a charging symbol on the watch.
You can replace the silicon ring of the charging cable with 2pcs silicon ring (included). Push the center of the charging dock, separate the silicon ring and replace it, then put them together.

Note:
This magnetic charging cable works with Apple Watch Series 1/2/3/4/5/6/7/8/ SE, Galaxy Watch Active 1 /2, Galaxy Watch 3.

USB for Charging

This clock radio has two USB(TypeA/ Type C) port at the back, which can provide up to 5V 2.1A to charge devices like smartphone, tablet etc. via a USB cable (not provided).

Note : Electrical energy drawn from the USB port may vary due to different charging cable condition, battery characteristic or power management system of your device being charged.

4-Level DIMMER Control

Press the SNOONE /SLEEP/ DIMMER Button while in Standby mode and select any of the four levels.

2-Level LED Decor

Press the LED button to turn the night LED ON(high/low level) or OFF when needed.

Changing the Lithium Battery

The lithium backup battery needs replacement when the LOW BATTERY indicator flashes, otherwise, the time and alarm settings will be lost/reset after a power outage.

• Leave the AC adapter connected to your AC outlet to retain memory while the original battery is removed.
• Unscrew the battery cover from the cabinet with a small screwdriver and insert a new battery with the same CR2032 or equivalent type into the slot the same way, observing the positive(+) polarity before putting the cover back into the slot. The LOW BATTERY indicator should then be Off.

BE CAREFUL NOT TO LOSE THIS SMALL SCREW!

Care and Maintenance

Care Of Cabinets
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your radio.

Lithium Battery Precautions

• Dispose of the old battery properly. Do not leave it lying around where a young child or pet could play with or swallow it. If the battery is swallowed, contact a physician immediately.
• The battery may explode if mistreated. Do not attempt to recharge it or disassemble it. Do not dispose of the old battery in a fire.

IC Information

This device complies with Industry Canada Licence-exempt RSSs. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

LIMITED WARRANTY

Emerson Radio Corp. warrants this product to be free from manufacturing defects in original material, including original parts, and workmanship under normal home use and conditions (“manufacturing defect”) for a period of ninety (90) days from date of original purchase in, and if used in the United States. Should service be necessary under this warranty, Emerson will provide the following at our Return Repair Facility provided the manufacturing defect is verified along with the date of purchase:

• Repair service for ninety (90) days from date of original purchase at no charge for labor and parts.

To Receive Authorization to Return a Defective Item, please contact Emerson Customer Service at 1-800-898-9020 or at http://www.emersonradio.com/service/return-policy.Have your Model number, Serial Number and dated Proof of Purchase with you when you call.

In the event the product must be returned to Emerson:

• Pack the unit in a well-padded heavy corrugated box. Please insure the item is well padded to avoid damage while in transit back to our facility. If the item incurs damage, it will NOT be replaced and the consumer will be responsible for return freight costs to receive their same unit back.
• Enclose your check or money order payable to Emerson Radio in the amount of $10 to cover return shipping and handling costs.
• Enclose a note with your name, address, phone number, Return Authorization number and brief reason for returning the unit.
• Enclose a copy of your proof of purchase (warranty service will not be provided without dated proof of purchase).
• Ship the unit prepaid via UPS or parcel post (SHIP INSURED and obtain a tracking number).

NOTE : This warranty does not cover:

(a) Damage to equipment not properly connected to the product.
(b) Cost incurred in the shipping of the product to and from Emerson’s Return Facility.
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence or failure to follow operating instructions (including cleaning instructions) provided with the product.
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s manual.
(e) Signal reception problems caused by external antenna or cable systems.
(f) Products not purchased in the United States.
(g) Damage to product if used outside the United States.

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALL APPL YTO THE PRODUCTTHEREAFTER. EMERSON MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.THE EXTENT OF EMERSON RADIO CORP’S LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR REPLACEMENT PROVIDED ABOVE
AND, IN NO EVENT, SHALL EMERSON RADIO CORP’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES SHALL EMERSON RADIO CORP. BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS PRODUCT. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.

10-90-1402A

The serial number can be found on the back cabinet We suggest that you record the serial number of your unit in the space below for future reference

Model Number: CKSW5010
Serial Number:___

FORAOOmONAL SET-UP OR OPERATINGASSISTANCE
PLEASECAl.l..:

1-800-898-9020
FOR CUSTOMER SERVICE,PLEASE E-MAIL TO:
intemel@emersonradio.com

ORWRITETO:
Emerson Radio Corp.
Consumer Affairs Dept.
959 Route 46 East
Suite 210, 2nd Floor
Parsippany, NJ 07054

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used battenes OUT OF REACH of CHILDREN
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the baby.

CALIFORNIA RESIDENTS ONLY-
WARNING : Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Emerson Part No. CKSW5010-20240227-00
Printed in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>