AONCIA AC-CFL1008 Ceiling Fan with Light Instruction Manual
- June 14, 2024
- AONCIA
Table of Contents
AC-CFL1008 Ceiling Fan with Light
“`html
Product Information
Specifications:
- Product: Ceiling Fan with Light
- Control: Remote control
- Voltage: 100~240V AC
Product Usage Instructions
Safety Precautions:
Before using the Ceiling Fan with Light, please read and
understand the following safety precautions:
-
Install the light fixture on the ceiling only to avoid fire,
electric shock, or injury from falling. -
If you notice any abnormality, turn off the power and contact
your seller. -
Avoid using the product on damaged sockets or loose plugs to
prevent electric shock, short circuit, or fire. -
Ensure the voltage applied is within 100~240V AC to prevent
overheating. -
Do not disassemble the product to avoid fire, electric shock,
or injury.
Usage Guidelines:
-
Install the Ceiling Fan with Light in a fixed socket on the
ceiling or wall, avoiding unreinforced or sloped locations. -
Keep the product out of reach of infants to prevent injury or
electric shock. -
Avoid placing audio or video equipment nearby to reduce
interference. -
Avoid letting foreign objects enter the main unit to prevent
electric shock or malfunction. -
Avoid damaging the power cord to prevent electric shock, short
circuit, or fire.
Maintenance:
After two years of installation, inspect or replace the Ceiling
Fan with Light to ensure safety and functionality.
Avoidance Guidelines:
-
Avoid placing hot items directly under the main unit to prevent
damage. -
Do not cover the main unit with flammable materials like cloth
or paper. -
Avoid touching the main unit when the light is on or just after
it goes out to prevent burns. -
Avoid touching the light source to prevent malfunction.
Frequently Asked Questions (FAQ)
Q: Can I install the Ceiling Fan with Light in a sloped
location?
A: No, it is recommended to install the product in a fixed
socket on the ceiling or wall and avoid sloped locations.
Q: How often should I inspect or replace the product?
A: It is recommended to inspect or replace the Ceiling Fan with
Light after two years of installation to ensure safety and
functionality.
“`
Ceiling Fan with Light
with remote control
Instruction Manual
“$$’-
To our customers
Thank you very much for your purchase Please be sure to read the “Safety
Precautions” before use. Please read this manual carefully and use the product
correctly. Please keep this manual carefully for reference at any time.
Email: support@aoncia.jp
Safety Precautions
This document contains safety-related information to prevent injury to the
user and other people and damage to property. Please understand the contents
carefully and follow the instructions.
WARNING Improper handling may result in death or serious injury
Prohibit
1. This light fixture is for ceiling mounting only. Installing in other
locations than specified may cause fire, electric shock, or injury from
falling. 2. If you feel any abnormality, turn off the power, make sure that
the abnormality has stopped, and then contact your seller. 3. Do not forcibly
install this product on wiring device that cannot be installed, otherwise it
may cause fire, electric shock, or injury from falling.
Wiring device that cannot be installed:
– Exposed power terminals – Damaged wiring device – Wobbling due to inadequate
fastening 4. Do not use if the socket is damaged or the plug of the wiring
device is loose, otherwise it may cause electric shock, short circuit or fire.
Must be observed
Use at 100~240V AC Applying excessive voltage may cause overheating, resulting
in fire or electric shock.
Disassembly prohibited
Do not modify or replace equipment parts as this may result in fire, electric
shock, or injury from falling.
Safety Precautions
Prohibit
1. Do not install in these locations Install in a socket fixed to the ceiling
or wall. Do not install in a socket for a bendent.
Unreinforced Locations (plywood board or plasterboard)
Sloped Locations
Wall Surfaces
2. Keep out of reach of infants as this may cause injury or electric shock. 3. Do not use audio or video equipment such as radios or televisions nearby as this may cause noise. If used, keep as far away as possible. 4. Do not let metal or other foreign objects enter through the gaps in the main unit, otherwise it may cause electric shock or malfunction. 5. Do not damage, forcibly bend, pull or twist the power cord, otherwise it may cause electric shock, short circuit or fire.
Attention Incorrect handling may result in injury or property damage
Must be observed
Luminaires have a life span. After two years of installation, even if there is
nothing wrong with the external appearance, the inside is deteriorating, so it
should be inspected or replaced.
Continued use for a long period of time without inspection may result in fire,
electric shock, smoking or falling, etc. (High ambient temperature and long
lighting time will shorten the life of the product)
Safety Precautions
Prohibit
– Do not place hot items such as stoves directly under the main unit. – Do not
cover the main unit with cloth, paper, or other flammable materials.
Contact prohibition
– Do not touch the main unit when the light is on or immediately after it goes
out, otherwise you may cause burns. – Do not touch the light source
(transparent power strip), otherwise it may cause malfunction.
Do not immerse in water
This device is not waterproof, do not use it in wet places such as bathrooms
or outdoors, otherwise it may cause fire or electric shock.
People with reduced mental capacity and infants should not use the product.
If any abnormality is detected, turn off the power immediately and contact the
manufacturer or a qualified service technician. When replacing parts, etc.,
ask a qualified installer to perform the replacement work.
Product Overview
Main unit (Do not disassemble)
Ceiling Cover
Catch Sealing Ring
Illumination Part (Light Guide Plate)
Front Guard
Accessories
Wing
2.4G Remote Control (Battery Included)
Remote Control Holder
Instruction Manual
How to install
Checking the Installation Environment
WARNING Always turn off the wall switch when installing, removing, or cleaning
wiring
devices.
How to use Remote Control
Remote Control (upper half)
Night Light Button Favorite Button
All Lights Button LED Timer Button
Relax Button LED Power Button
OFF Button
Refreshing Button Dimmer Button
Night Light Button: Turn on only the nightlight. Each press toggles between light and dark. Favorite Button: Record and reproduce your favorite lighting conditions Relax Button: Adjust the light to warm colors LED Power Button: Turn on/off the LED OFF Button: Turn off / stop LED and fan at the same time All Lights Button: Turn on all LED lights except the night light LED Timer Button: Set automatic light off (sleep timer) Refreshing Button: Adjust the light to a refreshing daylight color Dimmer Button: Adjust brightness
How to use Remote Control
LED lights on/off
1. Turn on the power (wall switch, etc.) and press the All Lights Button on
the remote control
– If connected correctly, the light will turn on at 100% dimming. – If the
light does not come on, there may be a connection problem. Turn off the power
and check the following points:
Connecting wiring device to a hook ceiling Visually check the connection
between the hook ceiling and the wiring device. Make sure that there are no
problems with the above connections before turning the power on.
2. Press the Dimmer/Refreshing/Relax Button to adjust the brightness and
color
– Each time you press the Dimmer Button, it becomes slightly brighter or
darker (10 levels). – Adjust the color to a refreshing daylight color with the
Refreshing Button and a warm color with the Relax Button (10 levels).
3. To store your favorite dimmer/color in memory, press the Favorite Button.
When you press and hold the Favorite Button, the LED will flash once to let
you know that it has been memorized.
4. To turn on the night light, press the Night Light Button.
Press the Night Light Button to turn off the entire LED and turn on the night
light. The night light has high and low levels, and each time you press the
Night Light Button, the strength changes.
5. Set a sleep timer
When the light is on, press the LED Timer Button once and it will
automatically turn off after 30 mins. Press twice to turn off the light
automatically after 60 mins. To cancel the timer, press the button again.
When the timer is canceled, the sound will be longer than when the timer was
set.
Sleep Timer Sound
Sound beep beep*2 Timer time 30 mins 60 mins
beep… Cancel
How to use Remote Control
LED lights on/off
6. Turn the light off/on with the remote control
By pressing the LED Power Button, you can turn off/on only the LED, regardless
of the fan.
7. Turn off the light with the OFF Button on the remote control or the wall
switch
When you press the OFF Button, the LED and fan will stop at the same time,
just like turning off the power with a wall switch. If you only want to power
off either, press the LED Power Button or the Fan Power Button to power off.
8. Memory Function
-Wall Switch Memory
When turning on/off with a wall switch, the light will turn on in the last
state it was turned off with the wall switch. However, the night light and off
settings are not memorized and all lights are turned on.
-Remote Control Memory
It lights up in the last state when it was turned off with the power button.
(Night light is not memorized)
How to use fan part
Remote Control (bottom half)
Fan Power Button Swing Angle Button
Fan Timer Button Rhythm Wind Button Wind Direction Switch Button
Air Volume Adjustment Button
Swing Rotation Button
Remote Control CH Setting Button
Fan Power Button: Run/stop the fan Swing Angle Button: Change the wind direction angle to 1 level Fan Timer Button: Set the fan off timer Rhythm Wind Button: Natural wind can be set by adjusting the air flow rate. Wind Direction Switch Button: Upward or downward wind direction can be switched. Air Volume Adjustment Button: Set the airflow in 8 levels Swing Rotation Button: Rotate the fan part 360 degrees to set the airflow direction
How to use fan part
Start/stop operation
1. Starting operation
Press the Fan Power Button on the remote control to start fan operation. –
During normal use, the fan starts operating at the airflow level at the last
time it was stopped due to the memory function. – When you first press the Fan
Power Button on the main unit or remote control, the fan will start soft
operation with low airflow. If the fan is turned off with the wall switch, it
will not start operating (at the time of purchase) the next time the power is
turned on (it can be started using the wall switch).
Run the fan with a wall switch
– Press and hold the Air Volume Adjustment Button 3 (fan memory). When the
setting is set, you will hear a beeping sound.
If you want to cancel
– Press and hold the Air Volume Adjustment Button 3 (fan memory) again. You
will hear a beep when the operation is canceled.
2. Adjust the air volume
Press the Air Volume Adjustment Button 7 on the remote control to adjust the
air volume. 1 is the weakest wind and 8 is the strongest wind.
3. Activating the Rhythm Wind Function
Press the Rhythm Wind Button once to activate Rhythm Wind, and twice to
deactivate it and return to normal wind. The wind volume can be adjusted (100%
30% 100%).
4. Set the off timer
The off timer time is set by the number of times you press the Fan Timer
Button during operation. A tone corresponding to the set time will sound to
let you know that the time has been set.
Off Timer Setting
Sound Image
Beep
Beep x2
Beep x3
Beep x4
P
Off Timer
Approx.1h Approx.2h Approx.4h Approx.8h
cancel
– To cancel the off timer, press the fan timer button several times until it beeps.
5. Press the Fan Power Button on the remote control to stop operation
Prevention of forgetting to turn off the fan The fan automatically stops
operation approximately 12 hours after the last operation.
6. Remote Control Channel Setting
Press the Remote Control CH Setting Button within 10s after turning on the
power, the LED will blink twice and the channel setting is complete.
The 2.4G remote control cannot support multiple fixtures.
How to use fan part
Change vertical wind direction
downward wind
Wind direction switch button (Long press)
upward wind
1. Change the wind direction with the Wind Direction Switch Button
– Downward wind By directing the wind downward, you can lower the perceived temperature. – Upward wind By directing the wind toward the ceiling, warm air from high places can be circulated downward.
Since the blades are stopped once, it takes a little time to switch the wind direction.
swinganglebutton
15degrees
Start/stop swing operation
By combining swing angle and swing rotation, you can send wind to a point in
the room or send wind over a larger area. 1. Angling the airflow direction
with the Swing Angle Button Pressing the Swing Angle Button during operation
angles the fan. Each time the button is pressed, the angle changes from 15
degrees to 0 degrees.
There will be some operating noise when setting the swing angle, but this is
not a malfunction.
swingrotationbutton
2. Rotate the fan part while angling with the Swing Rotation Button
Rotate the fan to the position where you want the air to flow, then stop. –
Rotation can be continued. The fan can send air not only to the area directly
under the ceiling light but also to a wider area.
If you do not set the swing angle using the Swing Rotation Button, the wind
will only be sent straight down.
There will be some noise when the swing rotates, but this is not a
malfunction. Swing Angle – If the wall switch is turned off while the swing is
rotating, the state of the fan is memorized. When the power is turned on with
the wall switch and fan operation is started with the remote control, the
operation starts in the state before the power was turned off last time.
Care & Maintenance
WARNING
When cleaning, be sure to turn off the wall switch and disconnect wiring
devices, otherwise electric shock, fire, or injury may result. – Never use
household detergent, thinner, benzene, alcohol, or polish. – Do not wash the
main unit by pouring water on it (this may cause electric shock or
malfunction).
Normal care
Remove dust from the front guard with a vacuum cleaner fitted with a crevice
nozzle, etc.
Cleaning
To remove dirt on the main unit, soak it in lukewarm water or neutral dish
detergent (excluding citrus-based detergents), wipe it with a soft cloth that
has been wrung out, and then gently wipe it with a dry cloth. (Do not rub the
resin part too hard, otherwise it may cause damage.)
Only the front guard and the ceiling cover can be washed in its entirety.
How to disconnect from the wiring device
1. Make sure the wall switch is turned off. 2. Loosen the screws and lower
the ceiling cover 3. Press the release button on the ceiling hook and turn the
main unit to the left (counterclockwise) to remove it from the wiring device.
When turning the main unit, it is easier to apply force than when installing
it, so be careful not to turn it too much and damage the hook ceiling part.
The direction of turning is the direction seen from the front guard side below.
loosenthescrew
ATTENTION
– Use an appropriate stepladder, etc., and have at least two people working to
remove the product so that it will not fall. – Be careful not to turn the unit
too much when removing it, as this may cause damage or malfunction.
The cover covering the LED light part cannot be removed.
Care & Maintenance
How to remove the front guard
ATTENTION
Be very careful not to injure yourself on the edges of the blades. When
removing or installing the front guard, hold the rear guard to prevent it from
rotating.To clean the front guard and blades, remove the front guard. 1. While
holding the rear guard, turn the front guard counterclockwise. 2. Remove the
front guard by pulling it toward you.
*The blades cannot be removed.
Rearguard(side)
frontguard
How to install the front guard
WARNING
Do not use without the front guard installed, otherwise it may cause accidents
or malfunctions. 1. Install by combining the protrusions on the rear guard
with the recesses on the front guard. 2. Hold the rear guard and turn the
front guard clockwise to secure the front guard.
Regular maintenance
Warning: When cleaning, be sure to turn off the wall switch and remove the
main unit. The blades should be cleaned regularly.
– If the wind becomes weak during use, there may be dust attached to the
blades, reducing the air volume. – Even if there appears to be no dust or
other dirt on the blades, if you feel that the wind has become weaker,
cleaning the blades may improve the situation.
How to store
– If you do not change settings or use the remote control for a long period of
time (more than 3 months), remove the batteries. – If you remove the main unit
and store it, clean it, dry it thoroughly, and then store it in a dry place ,
such as in a plastic bag, to prevent it from getting dusty.
Specification
Specifications are subject to change without notice.
Product Name Model Number Fixed Voltage Rated Frequency Rated Power
Ceiling fan with light AC-CFL1008 100V~240V 50/60Hz light: 40W fan: 12
Operating Temperature -20~45
Brightness (Lumen) 4160lm
Light Color
2700~6500K
Size
400mm*185mm
Weight
1.5kg
FAQ
If the product is not working properly, please refer to the following for
inspection. If there is any abnormality even after taking measures, be sure to
turn off the wall switch and contact the seller or customer service center.
WARNING: No one other than a repair technician should disassemble or repair
the product.
Symptoms LED part
Main Causes
Power (wall switch, etc.) is turned off
Treatment
Turn on the power (wall switch, etc.)
Light is not on
The breaker is turned off
Turn on the breaker
The hook ceiling and wiring device are not connected securely.
Securely connect hook ceiling and wiring device
There is an abnormal noise while the light
is on/off
Some noise may be generated from the power supply unit depending on the usage environment.
No problem
FAQ
Fan part
Power (wall switch, etc.) is turned off
The wings don’t turn
The breaker is turned off
Stopped suddenly
The hook ceiling and wiring device are not connected securely.
The function to prevent forgetting to turn off the power is working.
Timer button pressed.
Turn on the power (wall switch, etc.)
Turn on the breaker
Securely connect hook ceiling and wiring device
Press the fan power button on the remote control to start operation.
Press the fan power button on to start operation.
There’s a strange noise
Front guard not installed properly
Incorrectly attached to the ceiling
Install the front guard correctly
Re-check the installation on the ceiling
Not operate with wall switch
No problem (fan not set to run on wall switch)
Set the fan to run with a wall switch (“Running the fan with a wall switch” on page 7)
Common area
Remote control does not work properly
Remote control batteries are not installed correctly
The batteries in the remote control are dead
The channels on the main unit and remote control do not match
Reinsert the batteries in the remote control correctly
New batteries for the remote control
Match the channel settings on the main unit and remote control
About LED
Due to variations in LEDs, individual LEDs in a fixture or even fixtures with the same model name may differ in emission color and brightness. Please be aware of this.
The LED light source cannot be replaced. Please contact your store for repair.
About the lifespan of lighting fixtures
The Japan Lighting Fixtures Manufacturers Association recommends that general
lighting fixtures should be replaced 2 years after installation. To ensure
full usage, we recommend early inspection and replacement.
*Usage conditions are ambient temperature below 30 and usage time is 10 hours a day and 2 years of use.
Customer Service
Please contact us via the following methods to register your 12-month warranty
for free!
YouTube
More instructions
Scan the QR code to access more installation and usage videos ID Aoncia Link:
https://www.youtube.com/channel/UCex5JQ6Yq866_fE4LX8zT3g
Share
If you have any ideas and suggestions, please contact us. ID: Aoncia Link:
https://www.facebook.comAonciaGlbal
After-sales
lf you have any questions about product, please contact us. Email:
support@aoncia.jp (Except Saturdays, Sundays, holidays, New Year holidays)
Get benefits from your warranty
30 days no reason refund 12-month warranty for quality issues Free user
technical support New item promotions Give out good gifts from time to time
FCC Warnning: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection againstharmful
interference in a residential installation. This equipment generates, uses and
can radiateradio frequency energy and, if not installed and used in accordance
with the instructions, maycause harmful interference to radio communications.
However, there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>