PURE Highway 400 In Car DAB and Bluetooth Music Adaptor User Manual
- June 15, 2024
- Pure
Table of Contents
FAQs > In car radio > Highway 400/600 > Apple users:
If you cannot update the antenna software manually.
Highway 400 In Car DAB and Bluetooth Music Adaptor
Apple users: If you cannot update the antenna software manually.
Laura – 2021-10-19 – Highway 400/600
If you don’t have access to a Windows PC or it is not possible to update your
Antenna using the USB connector we recommend using an Android device.
The update process for Android is called OTA (Over the Air) and does not
require a PC.
Step 1: Make sure your Apple device is not connected to the Highway. The
easiest way to do this is to turn Bluetooth off on your Apple device or to
place it into flight safe mode until you have completed steps 2 to 6 below.
Step 2: On the Android device, download the Pure Go app from the Google
Play store
Step 3: Once installed, launch the app and select set up a new product.
Follow the inapp instructions so that the Android device and your Antenna are
connected.
Step 4: Once setup is completed, click the Menu icon (labelled below)
Then tap settings
If an update is available you will see a number next to the “Highway Software Update” text, as shown below.
Tap “Highway software update”
You will now need to tap install now.
The app will begin updating the Antenna; there are 5 stages that the update
runs through and the whole process will take around 20 minutes to complete.
Highway can be used during the update process. If for any reason the Android
app loses contact with Highway during the update, the update will resume once
the app is reconnected.
Step 5: It is advisable to forget both the Highway and the Go App from
the Android device to allow your Apple device to reconnect. Within the
Androids Bluetooth settings select “forget” both Highway XXXX and Pure Go
XXXX. Alternatively, you can turn Bluetooth off on your Android device to force
the Android device to disconnect.
Step 6: On your Apple device switch Bluetooth back on (or turn off flight
safe mode) and open the Pure Go App. If prompted, follow the reconnection
instructions.
References
- PURE SUPPORT
- Knowledgebase - PURE SUPPORT
- Apple users: If you cannot update the antenna software manually. - Knowledgebase / In car radio / Highway 400/600 - PURE SUPPORT
- Knowledgebase / In car radio / Highway 400/600 - PURE SUPPORT
- Knowledgebase / In car radio - PURE SUPPORT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>