FIAMMA 02096-10 Carry-Bike Pro C Instruction Manual
- May 15, 2024
- FIAMMA
Table of Contents
FIAMMA 02096-10 Carry-Bike Pro C
Package contents
Installation instructions
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use or
limitations of the product, contact the dealer. We recommend that the
installation is carried out by qualified personnel and in compliance with
current local regulations.
Before installing the product, check the strongest points of vehicles’s wall, where you can fi x the brackets.
Attention: keep the following labels and affix them to the Carry-Bike
rails.
In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.
Safety instructions
Important Information
Read the following instructions and warnings carefully; failure to observe
these installation and usage instructions as well as the laws for driving in
the relevant country may cause severe harm or damage for which the
manufacturer declines all responsibility. Before installation, ensure
compatibility with the vehicle on which the product must be installed.
In the event of an accident involving the vehicle and/or the product, ensure
that the product has not been damaged. In the event of damage, contact your
local retailer before moving the vehicle. Fiamma declines every responsibility
for any modification of the product that may cause damage and/or injury to
things and people.
Checking that the wall/rear door is sufficiently solid and suitable for
guaranteeing the resistance of the anchoring points is always mandatory. If
not, strength and compliance with the maximum load indicated in the
instructions are not guaranteed and it will be necessary to reinforce these
points.
After having positioned the Carry-Bike on the rear axle of the vehicle, the
normal weight distribution on both axles would be modified. This variation
must not exceed the maximum permissible axle load.
Never exceed the maximum permitted length and the total weight of the full-
load vehicle.
Make sure that loading occurs following a correct weight distribution; it must
be uniformly distributed (the heaviest bike must be placed near the wall of
the vehicle) to ensure better stability.
Always give warnings about the presence of the Carry-Bike on your vehicle,
using a clearly signal for leaning loads and, in case of limited rear
visibility, use the additional rear-view mirrors.
Take into account the presence of the Carry-Bike, paying attention during
driving and especially during reversing manoeuvres, particularly if you have
parking assist system. Always comply with speed limits and the Highway Code.
The speed should always be suitable to traffic conditions and towed load. In
case of use of the bike carrier with tow make sure that the tow hook is always
accessible and the corner mobility of the tow is guaranteed (volume measuring
din 74058).
Check periodically the bicycle rack to make sure it is fi rmly attached,
especially during the fi rst kilometers of after long trips to avoid damages
of the Carry-Bike/vehicle. Make sure the belts are not loose and that the
holding brackets have not shifted. Replace worn components immediately.
It is advisable to remove the batteries from bicycles, before loading them on
the carry-bike while traveling.
It is recommended to rotate the handlebars of bicycles to avoid damage to the
vehicle wall, for which Fiamma declines all responsibility.
Accessories
-
RAIL PLUS / XL
Item No. 98656M566
Item No. 98656M588 -
RAIL PREMIUM / XL
Item No. 98656M131
Item No. 98656M132 -
BIKE-BLOCK PRO
-
BIKE-BLOCK PRO S
-
BIKE FRAME ADAPTER
Item No. 06602-01- -
BIKE-BLOCK PRO D
-
BIKE-BLOCK PRO S D
-
PLASTIC SIGNAL
Item No. 98782-005 -
ALU SIGNAL
Item No. 98782-010 -
CABLE-LOCK
Item No. 98656-338
Warranty Fiamma
Warranty Fiamma. In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.
CUSTOMER SERVICE
Fiamma S.p.A. – Italy
Via San Rocco, 56
21010 Cardano al Campo (VA)
All rights reserved.
Fiamma S.p.A.
reserves the right to modify at any time, without notice, prices, materials,
specifications and models or to cease production of any model.
