SoundBox ECK4v2, 4 Gauge Amp Kit – Complete Amplifier-Complete Features/User Instruction
- June 5, 2024
- SoundBox
Table of Contents
SoundBox ECK4v2, 4 Gauge Amp Kit – Complete Amplifier
Specifications
- DIMENSIONS : 11.7 x 8.58 x 2.17 inches
- WEIGHT : 2.44 pounds
- PEAK POWER RATING: 2500 Watts
- FUSE HOLDER: 80 Amp
- BRAND: SoundBox
Introduction
If you wish to install an amplifier into your car, you must be aware that installing it is a hectic job, but another important factor is knowing and purchasing the right type of kits with the perfect wires. An amplifier kit has all the essentials that you require to install an amplifier in to your car. Any good amp kit should consist of a quality wire, a good fuse holder and power wires and sufficient. In addition to all of this, the wire must be budget-friendly, as well. The wires used in the amp wiring must be carefully selected and must have the ability to handle the adequate current.
SoundBox ECK4v2 is a complete 4-Gauge amplifier kit. It comes with a new and improved design. The fuse holder is upgraded and the wire strands have been increased. The peak power rating of the amplifier kit is 2500 watts. It comes with a power wire, ground wire, speaker wire, RCA cable, protective wire loom, fuse holder, AGU fuse, connecting terminals and cable ties. The power and ground wire are 4-gauge and are made of copper-clad aluminum. The wire jacket has been heat tested for maximized ease around the curves. The RCA cables are twisted for maximized sound interference control. The wires that come in this kit have the ability to handle adequate current and deliver the required signal strength for the production of your desired sound quality.
What’s in the box?
- 18 Ft. – 4 Gauge Power Wire – Red
- 3 Ft. – 4 Gauge Ground Wire – Black
- 18 Ft. – 14 Gauge Superflex Speaker Wire
- 18 Ft. – 18 Gauge Remote Turn-On Wire
- 18 Ft. – Triple Shielded Twisted Pair RCA Cable
- Black Protective Wire Loom
- Inline ANL Fuse Holder
- 80 Amp AGU Fuse
- Connecting Terminals
- Wire Ties
How to setup the Amp kit?
- Connect the main power wire with the battery and the amplifier’s positive terminal.
- Use the remote connecter to connect the head unit with the amplifier.
- The ground cable is used to connect the amplifier with the ground terminal.
- Use the speaker wire to connect the subwoofer to the amplifier.
WARNING
This product can expose you to chemicals including di (2ethylhexyl)
phthalate (DEHP), which [are] known to the State of California to cause
cancer.
FREQUENTLY ASKED QUESTIONS
-
How many watts?
The wires are rated 4-gauge and can handle a maximum of 2500 watts -
How long is the RCA patch cable?
The length of the RCA cable is 18 ft. which is long enough. The package includes a triple shielded twisted pair RCA cable. -
What gauge is the speaker wire?
The speaker wire in that comes in this kit is 4 gauge. -
Does this kit come with an RCA cable ?
Yes, it comes with an RCA cable. The RCA cable is 18 feet long and triple shielded -
What is included in the kit?
The kit includes power wire, ground wire, speaker wire, RCA cable, protective wire loom, fuse holder, AGU fuse, connecting terminals and cable ties. -
Does this have every cable needed?
Yes, it has all the cables required to install the amplifier in your car. -
How long is the speaker?
The amp kit comes with a speaker wire which has a length of about 18 ft nd is 14 gauge. -
Where does the remote turn-on wire connect?
The remote turn on wire connects from the remote wire present in the harness to the remote connection of your subwoofer. -
What is the amp of the AGU fuse?
The AGU fuse is 80 amperes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>