RETEKESS TD036 Wireless Pager Instruction Manual

: June 12, 2024
: RETEKESS

Table of Contents

Product introduction
Documents / Resources

TD036 Wireless Pager
Instruction Manual

Product introduction

Press the Pay key or Order key to make a call to the receiving device, and press the Cancel key to cancel the call.

Call button
Cancel button

single sale package content

Wireless Pager
Model:TD036
Frequency:433.92MHz (ASK)
Input: 2pcs”1.5V(AAA battery)
Work Current:<100mA
FCC ID:2A3NOTD036
Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District, Zhengzhou, Henan, China EU
Importer: Germany Retevis Technology GmbH
Address: Uetzenacker 29,38176 wendeburg
SKU:F9650A
MADE IN CHINA

Power supply	2pcs *AAA 1.5V battery
Enclosure material	ABS（black）
Operating mode	ASK
Transmit frequency	433.92MHz
Standby current	<5 uA
Transmit current	<100mA
Button function	Call button: press 1 time (the indicator light is red) to

make a call;
Cancel button: Press 1 time (the indicator light is red) to cancel the call;
Low battery reminder| When the button is pressed, the indicator flashes to alert you
Turn off reminder| When the button is not triggered, the LED flashes red

ATTENTION!

RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE
Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, which when used improperly, can cause biological damage.
All Retekess radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of the radios.
These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it.
Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.who.int/en/

Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has a RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Unauthorized modification and adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
(If applicable) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CE Requirements:

(Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.
Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

RF Exposure Information (if appropriate)
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF exposure compliance requirements to be exceeded.
During transmissions, your radio generates RF energy that can possibly cause interference with other devices orsystems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
The device complies with RF specifications when the device used at 5mm from your body.
DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Protect your hearing:

Note : Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio’s volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

WARNING
Approved Accessories

This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations.
For a list of Retekess-approved accessories for your radio model, visit the following website: http://www.Retekess.com
WARNING

Guarantee

Model Number:	User’s Name:	Telephone:
Serial Number:	Country:	Telephone:
Purchasing Date:	Post Code:	Address:
Dealer:		Email:

Remarks:

This guarantee card should be kept by the user, no replacement if lost.
Most new products carry a two-year manufacturer’s warranty from the date of purchase.
The user can get warranty and after-sales service as below:
 Contact the seller where you buy.
 Products Repaired by Our Local Repair Center
For warranty service, you will need to provide a receipt proof of purchase from the actual sellerfor verification

Exclusions from Warranty Coverage:

To any product damaged by accident.
In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs.
If the serial number has been altered, defaced, or removed.

Henan Eshow Electronic Commerce Co., Ltd
Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District,
Zhengzhou, Henan, China
EU Importer: Germany Retevis Technology GmbH
Address: Uetzenacker 29,38176 wendeburg
Facebook: facebook.com/RetekessWirelessSystem
E-mail: support@retekess.com
Web: www.retekess.com
MADE IN CHINA

https://www.retekess.com/