Vadania 32 Blind Corner Pullout Organizer Instruction Manual
- June 1, 2024
- vadania
Table of Contents
Vadania 32 Blind Corner Pullout Organizer
Specifications :
- Components:
- Shelf-A: 2pcs
- Cap-B: 1pcs
- Hexagon Screwdriver-C: 1pc
- Self Tapping Screws-D: 15pcs
- Plastic Mounting Interface (Boom)-E: 1pcs
- Plastic Mounting Interface (Top)-F: 1pcs
- Support Pipe-G: 1pcs
- Support Arm-H: 2pcs
- Wall Mounting plate-I: 2pcs
- M6 screws-J: 4pcs
- M5 screws-K: 8pcs
- Spacer-L: 4pcs
- Dimension Size:
- Max. Load Capacity: 2.8/70mm
- Width: 23.6/600mm
- Depth: 29.6/750mm
- Cabinet Space Requirement: 800mm x 173.4mm x 486mm x 424.1mm
Product Usage Instructions
Cabinet Assessment:
This organizer requires specific space within your kitchen cabinet. Ensure
your cabinet meets the specified dimensions before installation.
Installation :
-
Step 1: Mounting Distance Determination
Determine the mounting distance on the top, side, and bottom panels of the cabinet. -
Step 2: Mounting Plate and Interfaces Setup
-
Place the metal mounting plate (Part I) and plastic mounting interfaces (Part E & F) in position and secure with wood screws (Part D)
-
Put the plastic cap (Part B) on top of the metal mounting plate (Part I).
-
Step 3: Support Arm Installation
-
Thread a support arm (Part H) and (Part K) into the riser pipe (Part G) one by one.
-
Install and adjust the height of the riser pipe as needed.
-
Step 4: Shelf Installation
-
Place the sheet (Part L) and screws (Part J) in their designated positions and secure them with a wrench (Part C).
-
Repeat the process for the other shelf.
-
Step 5: Shelf Height Adjustment
You can adjust the height of both shelves to accommodate your storage needs.
FAQ:
Q: Can the shelf height be adjusted?
A: Yes, the height of both shelves can be adjusted according to your
requirements.
Instruction for Blind Corner Pullout Organizer for 32″-Left Opening
Components
Dimension Size
Cabinet Space Requirement
- This organizer has a minimum space requirement and open width for your kitchen cabinet. Please check and confirm if your cabinet is suitable before purchase.
- Kindly assess the specified pull-out ranges below to confirm the absence of any impediments when utilizing blind corner pull-out organizers in kitchen cabinets.
Installation
If you prefer intuitive instructions, we recommend you visit the purchase link to watch our installation tutorial video.
- Determine the mounting distance and make some marks of your cabinet accordingly.
- Place the metal mounting plate(Part I) and plastic mounting Interfaces(Part E&F) in their mounting position and secure with wood screws(Part D).Place the plastic cap(Part B) on top of the metal mounting plate(Part I).
- Thread a support arm(part H) and (part K) into the riser pipe(Part G) one by one. Install and adjust the height of the riser pipe.
- Place the sheet (Part L) and screws (Part J) in their installation positions and secure them with a wrench (Part C).Repeat for the other shelf.
- The height of both shelves can be adjusted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>