vadania B0797PQ71W Blind Corner Pullout Organizer for 36 Inch Left Opening Instruction Manual
- June 1, 2024
- vadania
Table of Contents
Instruction for Blind Corner Pullout Organizer for 36″-Left Opening
Components
Dimension Size(mm)
Cabinet Space Requirement
This organizer has a minimum space requirement and open width for your kitchen
cabinet. Please check and confirm if your cabinet is suitable before purchase.
Kindly assess the specified pull-out ranges below to confirm the absence of any impediments when utilizing blind corner pull-out organizers in kitchen cabinets.
Installation (mm)
If you prefer intuitive instructions, we recommend you visit the purchase link
to watch our installation tutorial video.
Determine the mounting distance and make some marks of your cabinet
accordingly.
② Place the metal mounting plate(Part A) and plastic mounting Interfaces(Part F&G) in their mounting position and secure with wood screws(Part J).Place the plastic cap(Part L) on top of the metal mounting plate(Part A).
③ Thread a support arm(part C) and (part H) into the riser pipe(Part B) one by one.Choose a suitable height and insert the pin(Part I) into the hole of the riser pipe.Then snap the protruding part of the pin into the notch of the support ring(Part H).The other support arm also repeats the above installation method.
④ Install and adjust the height of the riser pipe.Determine the mounting position, secure the left side support arm(Part D) with machine screws(Part K).So that it is level with the right side support arm.Repeat for the upper support arm.
⑤ Place the sheet (Part E) in the installation position on arm (Part D) and secure it with the Plastic Clip(Part O). Repeat for the other shelf. Hardware for Your Life
⑥ The height of both shelves can be adjusted.
