onn 100122465 Wireless Ergonomic Thumb Rest 5 Button Mouse User Manual

onn 100122465 Wireless Ergonomic Thumb Rest 5 Button Mouse

FCC

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement:

• The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual.
• Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such a function is available.

FCC Caution:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Before Use

Notes: All parts have to be unpacked and the packaging material has to be removed completely. Before use, verify the package contents are complete and undamaged.

BATTERY WARNING STATEMENT

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries.

System Requirements

• Windows® 7/8/10/11 or later, macOS® 10.5 or later, Android™™

Chrome OST™

• Available USB port or Bluetooth® on your laptop or computer

What’s in the Box

• 1 Wireless Mouse
• 1 USB nano receiver
• 1 AA battery

Specification

• 5 clickable buttons, scroll wheel, on/off switch, and connection switch
• 5 adjustable DPI sensitivity levels: 600/1000/1600/2400/3600 DP
• Connect to up to 3 devices simultaneously with Bluetooth® wireless technology or a USB nano receiver
• 2 Bluetooth® wireless connection channels
• 2.4GHz USB nano receiver (stores in the battery compartment when not in use)
• USB plug-and-play
• Windows, MacOS, ChromeOS, Android, iOS compatible
• 4.85 in L x 3.14 in W x 1.74 in H (12.3 cm x 8 cm x 4.4 cm)

Features

1. Left button
2. Right button
3. Scroll wheel
4. Forward
5. Backward
6. DPI Switch Button & LED indicator
7. USB nano receiver
8. Connect button
9. Battery cover
10. Easy-switch (Connection switch)
11. ON / OFF switch

Forward

• Press this button to view the next page in your Internet browser

Backward

• Press this button to view the previous page in your Internet browser

DPI Switch Key

• a) 5 adjustable sensitivity levels
  • DPI
  • 600 dpi
  • 1000 dpi
  • 1600 dpi
  • 2400 dpi
  • 3600 dpi
• b) Default is 1600 DPI

Switch Connection Channel

• This mouse can connect up to 3 different devices.
• Use “Easy-switch” to change connection channels between
• USB nano receiver and 2 other Bluetooth channels.

Switch between different devices

• For example, you can set USB nano receiver ( ) on laptop A Bluetooth ( 1) on desktop B Bluetooth ( 2) on tablet C then use “Easy-switch” to switch connection between these 3 computers.

Connect button

• Press and hold this button to set the mouse in Bluetooth pairing mode or reconnect to a paired device.

Installing Battery

Insert the battery in the correct position according to the instructions labeled on the mouse.

Connection Setup

• Connect via USB nano receiver This is plug-and-play with a USB nano receiver.
• Make sure to turn on the power and set the connection channel to a USB nano receiver ( ).
• Plug the USB nano receiver into an available USB A port on your computer and start surfing.

Connect via Bluetooth in Windows

• Turn on the mouse and set it on either Bluetooth ( 1) or Bluetooth ( 2). Click on “Start” (bottom left corner of your screen).

Go to Settings

• Device -> Bluetooth & other devices -> Turn on Bluetooth
• Add Bluetooth or other device -> Add a device (Bluetooth)
• Press and HOLD the “Connect” button to set the mouse in pairing mode (LED will start flashing) Click on “onn.BTMouse” in the list on your computer to set up pairing.
• Note: After successful pairing, the mouse name shown on your computer will become “onn. Wireless Ergonomic Mouse”.

Connect via Bluetooth in Mac

• Turn on the mouse and set it on either Bluetooth ($ 1) or Bluetooth ($2). Click on “Apple menu” (top left corner of your screen).

Go to System Preferences

• Bluetooth
• Turn Bluetooth on to set up Bluetooth device

Follow the same steps as Connect via Bluetooth in Windows to set the mouse in pairing mode and complete Bluetooth pairing.

Low Battery

• If this LED starts blinking, you need to change the battery.

Help with Setup

USB nano receiver Mouse is not working?

1. Is the mouse powered on? Make sure the channel is set to ( ).
2. Is the USB nano receiver securely plugged into a USB port? Try changing USB ports.
3. If the USB nano receiver is plugged into a USB hub, try plugging it directly into a USB port on your computer.
4. Check the orientation of the battery inside the mouse.
5. Try a different surface. Remove metallic objects between the mouse and the USB nano receiver.

If it is still not working, try the steps below to re-pair the mouse and receiver.

• A. Re-plug the USB nano receiver into the USB port on the computer, and make sure the channel is set to ( ).
• B. Press the connect button on the mouse (keep the mouse close to the receiver).
• C. If it does not work after 10 seconds, repeat steps A and B.

Bluetooth

Is the mouse powered on?

1. Is the mouse powered on? Make sure the channel is set to ($1 or *2 ). Make sure to turn on the Bluetooth function on your computer.
2. Check the orientation of the battery inside the mouse.
3. Try a different surface. Remove metallic objects between the mouse and the computer.
4. Set the mouse in pairing mode. Make sure it is discoverable on your computer and then complete pairing.
5. If it does not work after 10 seconds, repeat steps 1 to 3.

Reconnection

• Under Bluetooth connection (either Bluetooth 1 or 2) mouse can automatically reconnect to its last connected computer. If it fails, you can always re-pair again.

Note

• The primary use case of the mouse is for computers, (desktop, laptop, and tablet computers), connecting to a smartphone is not recommended.
• Model: 100122465

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>