KAWA T6 Security Camera User Manual
- June 17, 2024
- KAWA
Table of Contents
KAWA T6 Security Camera
Specifications
- Model: T6/T6 Pro
- Input: DC 12V 1A / PoE 48V 0.2A
- Image resolution: 25601440(T6)/26881520(T6 Pro)
Product Usage Instructions
Quick Configuration
- Download the KAWA AIoT APP by scanning the QR code.
- Add the device to the app by following the instructions.
Network Configuration Methods
Method 1: Use with a PoE Power Adapter
- Connect the camera to the network through a PoE interface.
Method 2: Use with a DC Power Adapter
- Power on the camera and connect it to the router using a network cable.
Use with an NVR
This product can be connected to a PoE NVR or a regular NVR via a PoE switch/injector.
Waterproof Kit Installation
- Follow the installation steps provided.
Product Installation
Note: Ensure the wall is suitable for installation before proceeding.
- Insert a Micro SD card (optional).
- Adjust the camera angle for optimal coverage.
Notes
- Non-professionals should not open the screws on the speaker.
- Use a dedicated power adapter.
- Pay attention to the distance between the camera and the router for a wireless Wi-Fi connection (within 50 meters).
- For outdoor use, ensure proper waterproofing.
Please read this Manual carefully before use, and keep it for future reference.
Basic Parameters
- Model: T6/T6 Pro
- Input: DC 12V 1A / PoE 48V 0.2A
- Image resolution: 25601440(T6)/26881520(T6 Pro)
Packing List
Product Appearance
Quick Configuration
-
Download the app.
Download the KAWA AIoT APP by scanning the QR code below. -
Add the device to the App.
Open the KAWA AIoT APP, click on the “+” in the upper right corner, select “KAWA Security Camera T6/T6 Pro”, and follow the instructions in the APP to set up the device.
This product can be powered and connected to the network through a PoE interface.
The device status corresponding to the indicator light during the connection process is as follows:
| Red flashing | Waiting for pairing |
|---|---|
| Green flashing | Connecting |
| Green remains | Connected successfully |
| altReerndaatnindggflraesehning | Connection failed |
Network Configuration Method
Ensure the phone and device are on the same network.
Method 1: Use with a PoE power adapter
This product can be powered and connected to the network through a PoE
interface.
Method 2: Use a DC power adapter
-
Power on the camera.
Insert the power cable into the power port and power on the device.
-
Connect to the network.
Connect the camera’s network port to the router using a network cable.
The network cable is not included in the package, you need to purchase it yourself. -
Configure Wi-Fi without a network cable (Sound Wave Setup).
Choose “Wi-Fi Connection” after you reset the camera as instructed in the app. Enter your Wi-Fi name and password (same as your phone’s Wi-Fi). Then click “Send Sound Wave” (ensure phone audio is enabled) to set up the camera network.
Use with an NVR
This product can be directly connected to a PoE NVR or connected to a regular
NVR via a PoE switch/injector.
Waterproof Kit Installation
The steps for installing the waterproof kit are as follows
Product Installation
The wall must be thick enough and able to support at least 3 times the weight of the device for installation.
-
Insert Micro SD card (optional).
Insert the storage card after using a screwdriver to open the cover at the bottom of the camera.
- The Micro SD card is not included in the package, you need to purchase it yourself.
-
Install the camera.
Before installation, ensure that the camera has been added to the APP.- For concrete wall: drill holes on the wall of the positioning papersection and push the expansion screws into the holes, aligning the base of the camera with the borehole and pushing in the screw, and fixing it.
- For the wooden wall: push the screw directly into the camera base to secure it.
-
Adjust the camera angle.
Adjust the camera angle to ensure optimal coverage by viewing live images of the camera on the app.
Notes
- Non-professionals are prohibited from opening the screws on the speaker, otherwise, it may pull out the wires inside or cause other malfunctions.
- Please use a dedicated power adapter.
- For wireless Wi-Fi connection, please pay attention to the distance between the camera and the router. (within 50 meters)
- For outdoor use, please pay attention to waterproofing and rainproofing.
FAQ
- How to save the videos?
- The camera supports two storage modes: local storage and cloud storage (purchase need).
- Local storage: save the videos recorded by the camera to a Micro SD card.
- Cloud storage: save the videos recorded by the camera to the cloud.
- According to the storage time, videos can be saved for the latest
- days or 30 days circularly. You can watch the videos online as well as download.
- How to check if the camera is offline unconventionally?
- Check whether the power supply and network are normal.
- Re-plug the power supply to restart the device.
- Reconfigure the camera.
- Check whether the network broadband is above 8Mbps.
Certification
- Product Name: Security Camera
- Brand Name: KAWA
- Model Name: T6/6 Pro
- Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
Use the Security Camera in an environment with temperatures between -20°C and
60°C, otherwise, it may damage your Security Camera. It can be operating under
2000m.
Hereby, KAWA ELECTRONICS COMPANY LIMITED declares that the radio equipment
type Security Camera complies with Directive 2014/53/EU.
For this device, Head SAR and Body SAR were performed with the device
configured in the positions according to EN62311, and Body SAR was performed
with the device 300mm from the phantom.
Body SAR was also performed with the headset attached and without.
Caution
- For Adapter: Shall be installed near the equipment and shall be easily accessible.
- For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. Only can use the adapter as below:
- Manufacturer: Shenzhen Tianyin Electronics CO., LTD
- Model Name: TPQ-236A120100PW01
- Rated Input: 100-240v~50/60Hz 0.4A
- Output: 12V 1A
The plug could be disconnected from the adapter.
EVATOST CONSULTING LTD
- Suite 11, First Floor, Moy Road Business
- Centre, Taffs Well, Cardiff, Wales, CF15 7QR
- contact@evatmaster.com.
eVatmaster Consulting GmbH
- Bettinastr. 30
- 60325 Frankfurt am Main, Germany
- contact@evatmaster.com.
FCC STATEMENT
FCC RF Exposure Warning Statements
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used under the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation i subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance of 20cm between the radiator & body.
FCC ID:2AZWZ-T6PRO
Radio Frequency Exposure Statement for IC
This device contains license-exempt transmitters)/receivers) that comply with
Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with a minimum
distance of 20cm between the radiator & body.
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
Social Media
- @KAWACameraGlobal
- @kawa.easylife
- @KAWA_easylife
- @kawa.Official
CONTACT
- Warranty: 12-month limited warranty
- Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
- E-mail: support@kawa-in.com.
- Website: www.kawa-in.com.
- Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG