ALLSTAND 20230906 One Line Computer Desk Instruction Manual
- June 17, 2024
- ALLSTAND
Table of Contents
One Line Computer Desk
Instruction Manual
Note: There is also a more detailed installation video on the product detail page on Amazon.
E-mail:support@allstand.net
Made in China
MATTERS NEEDING ATTENTION
- You need a helper to finish the installation.
- Don’t over-tighten the screws until all the parts are in place. Failure to follow the instructions may cause misalignment of the screws.
- DO NOT let children climb the product.
- To avoid suffocation danger, keep small parts and package materials away from children.
- Adult assembly required. Keep children away during the installation.
- Children should not use it without parents’ supervision.
- You could use “corner guard” to protect children from getting hurt by the edges.
- In order to avoid giving you a bad installation experience, please follow the steps in the instruction manual to install and carefully distinguish screws and steel strips.
PART LIST
(1)
x1
| (2)
x1
---|---
(3)
x1
| (4)
x2
(5)
x3
| (6)
x1
(7)
x1
| (8)
x4
(9)
x1
| (10)
x2
(11)
x1
| (12)
x1
(13)
x2
| (14)
x2
(A) (B) (C)
ø5x40mm M6x35mm M6x26mm
x12+1 x18+2 x24+2
(D) (E) (F)
M6x15mm M3.5x12mm M6
x5+1 x2+1
x6
(G)
x2
| (H)
x2
(I)
x1
| (J)
x1
J-1 J-2
(K)
x1
| (L)
x1
S4 S3
ASSEMLYIN INSTRUCTION
(Note: There is also a more detailed installation video on the product detail page on Amazon.)
To better adapt to your home layout and environment, we provide 2 installation methods for you to choose from. There maybe extra screw holes after installation, please do not worry.
I
II
ASSEMLYIN INSTRUCTION I
Note: Don’t over-tighten all the screws until all the parts are in place.
1
(F) x6
2
(L) ** ** x1
S4
| (B) ** x6**
---|---
3
(L) ** ** x1
S4
| (B) ** x8**
---|---
4
(L) ** ** x1
S4
| (D) x3
---|---
5
(L) ** ** x1
S4
| (C) x6
---|---
6
(L) ** ** x1
S4
| (C) x4
---|---
7
(L) ** ** x1
S4
| (C) x4
---|---
8
(I) x1 | (E) x2 | (K) x1 |
---|
9
(L) ** ** x1
S4
| (C) x4
---|---
10
(L) ** ** x1
S4
| (B) ** x4**
---|---
11
(L) ** ** x1
S4
| (C) x6
---|---
12
(L) ** ** x1
S3
| (A) x4
---|---
13
(L) ** ** x1
S3
| (A) x8
---|---
14
(L) ** ** x1
S4
| (D) x2| (H) x2
---|---|---
Note: When pasting the LED strip in the position as shown, peel off the
double-sided tape. Don’t tear off the bottom side of the tape.
After pasting the tail, you can use the cable ties to organize the wires.
15
(G) x2 | (J) x1 |
---|
Note: Please power on the LED strip, remove the plastic piece inside the remote, and control the strip.
16
ASSEMLYIN INSTRUCTION II
Note: Don’t over-tighten all the screws until all the parts are in place.
1
(F) x6
2
(L) ** ** x1
S4
| (B) ** x6**
---|---
3
(L) ** ** x1
S4
| (B) ** x8**
---|---
4
(L) ** ** x1
S4
| (D) x3
---|---
5
(L) ** ** x1
S4
| (C) x6
---|---
6
(L) ** ** x1
S4
| (C) x4
---|---
7
(L) ** ** x1
S4
| (C) x4
---|---
8
(I) x1 | (E) x2 | (K) x1 |
---|
9
(L) ** ** x1
S4
| (C) x4
---|---
10
(L) ** ** x1
S4
| (B) ** x4**
---|---
11
(L) ** ** x1
S4
| (C) x6
---|---
12
(L) ** ** x1
S3
| (A) x4
---|---
13
(L) ** ** x1
S3
| (A) x8
---|---
14
(L) ** ** x1
S4
| (D) x2| (H) x2
---|---|---
Note: When pasting the LED strip in the position as shown, peel off the
double-sided tape. Don’t tear off the bottom side of the tape.
After pasting the tail, you can use the cable ties to organize the wires.
15
(G) x2 | (J) x1 |
---|
Note: Please power on the LED strip, remove the plastic piece inside the remote, and control the strip.
16
ASSEMLY INSTRUCTION
(1) Turn On/Standby
(2) Dynamic Mode/Speed Adjust
(3) Static Color/Brightness Adjust
(4) Direct Color Select
Specification
Dynamic Mode
|
22 modes
---|---
Static Color
| 20 colors
PWM Grade|
256 levels
Brightness Grade
| 5 levels
Speed Grade|
10 levels
Demo Mode
| Yes
Direct Color Select|
Yes
Output Color Switchable
| Yes, 6 options
Working Voltage|
DC 5~24V
Output Current
| 3x4A peak, 3x2A constant
Remote Frequency|
433.92MHz