ELECTRIC GARDEN X815 15W Wireless Charger User Manual
- June 4, 2024
- electric garden
Table of Contents
ELECTRIC GARDEN X815 15W Wireless Charger
Product Specification
- Model: X815
- Input: 5V-2A, 9V-2A, 12V-2A
- Output: 15W
- Efficiency: >80%{Max)
- Transmission Distance : 7mm
- Operating Temperature : 0-45 C
- Standard : Q
Note: The above parameters are collected from the real result of testing phones, the actual parameters will be different due to factors such as the phone and the usage environment.
RFQ
Charging Slowly/ Being Hot
-
Please kindly check whether the phone puts the right charging zone
-
Please kindly check whether the adapter supports QC3.0;
-
Please kindly check whether the phone supports Ql;
-
Please kindly check whether the temperature of the phone is beyond 35 C
Cannot work normally
- Please kindly check whether there are some metal substance in the phone and this charger, for example, the metal phone case or the metal ring;
- Please kindly check whether the phone case is beyond 3mm
Attention:
- Please use QC3.0 adapters;
- Please keep the charger away from fire water, Children can not play with it as a tool;
- Please do not disassemble it, or the factory IS not responsible for the result;
- Please clean this charger with a dry soft cloth; not a wet cloth or chemical
Using Guide:
- Power On: Blue light is always on
- Changing: Blue breathing light
- Charged Fully: Blue breathing light
- FOD Protection: Blue light flashes at 1Hz
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>