SUPERATV Flip Windshield for Multiple 550 Through 590 John Deere Gator XUV Instruction Manual
- June 3, 2024
- SUPERATV
Table of Contents
SUPERATV Flip Windshield for Multiple 550 Through 590 John Deere Gator
XUV
WHAT IS IN THE BOX
WARNING
- Do not discard packaging until product has been successfully installed.
- SuperATV does not recommend keeping Windshield installed while transporting on an open air trailer.
- This item is not returnable if the protective film has been removed.
- Test fit to the cage to confirm fitment before removing film.
Windshield Cleaning
- Do not use Rain-X®, Plexus® or any other protector, wax, or polish.
- Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
- Never use abrasive cleaners, abrasive pads, or gritty cloths.
- Do not use a windshield wiper blade or install a motorized windshield wiper
- Never use razor blades, scrapers, squeegees, brushes, etc.
- Thoroughly rinse Windshield to float off dirt and mud.
- Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo, rubbing alcohol, or hand washing soap can also be used.
- To prevent water spots, use a chamois to blot Windshield dry
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
user has aftermarket products on machine, contact SuperATV® to verify that
they will work together. Although SuperATV® has thousands of satisfied
customers, user should be aware that installing lift kits, long travel, or
suspension kits, tires, etc. will change the ride of machine and may increase
maintenance and part wear. Operating any off-road machine while, or after,
consuming alcohol and/or drugs increases risk of bodily harm or death. No
warranty or representation is made as to this product’s ability to protect
user from severe injury or death. SuperATV® urges operators and occupants to
wear a helmet and appropriate riding gear at all times. By purchasing and
installing SuperATV® products, user agrees that should damages occur,
SuperATV® will not be held responsible for loss of time, use, labor fees,
replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not
be held responsible for any direct, indirect, incidental, special, or
consequential damages that result from any product purchased from SuperATV®.
The total liability of seller to user for all damages, losses, and causes of
action, if any, shall not exceed the total purchase price paid for the product
that gave rise to the claim. SuperATV® will warranty only parts provided by
SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other
manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and
products are not warranted if item was not installed properly, misused, or
modified. Installing, adding, modifying, or fabricating any factory or
aftermarket product to your ATV/UTV may violate certain local, state, and
federal laws. Be advised that laws vary depending on town, city, county,
state, etc. Use of certain products on public streets, roads, or highways may
be in violation law. The Buyer is solely and exclusively legally and
personally responsible for any violation of the law by the installation or use
of the product. You must abide by all local, state, and federal laws,
including but not limited to vehicle safety, traffic laws, and ordinances. It
is your responsibility to know the laws and how they apply to you. The Buyer
is responsible to fully understand the capability and limitations of his/her
vehicle according to manufacturer specifications, warnings and instructions
and agrees to hold SuperATV® harmless from any damage resulting from failure
to adhere to such specifications, warnings and/ or instructions. The Buyer is
also responsible to obey all applicable federal, state, and local laws and
ordinances when operating his/her vehicle while using this product, and the
Buyer agrees to hold SuperATV® harmless from any violation thereof.
Use hand tools only when assembling
Rubber must face Plastic when installing Sealing Washers When assembling, do not tighten hardware completely.
INSTRUCTION
Install provided Seal to lower portion of Windshield. To ease installation,
soak Seal in hot water before cutting or installing to increase flexibility
Install Handle and Support to Windshield.
- Hardware included with Handle.
- Repeat for opposite side.
Install Bracket – R, Clamp, and Mount – R to cage with hardware shown
.
Extra hands will make Windshield installation easier
Place Windshield onto machine and secure to Frame with hardware shown.
Secure Windshield to Bracket – R and Bracket – L with hardware shown.
Install Catch to Mount – R. Hardware included with Catch.
- Repeat for Mount – L.
Place Windshield in open position and install Struts to Clamps and Pivot
Blocks with hardware shown.
Close and align Windshield to
machine, engage Latches, and tighten all hardware.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>