Dynalite DUS804CS-UP Multifunction Sensor Instruction Manual
- June 1, 2024
- Dynalite
Table of Contents
Dynalite DUS804CS-UP Multifunction Sensor
Product Specifications
- Model: DUS804CS-UP
- Type: Multifunction Sensor
- Dimensions:
- Width: 58 mm (2.28 in)
- Depth: 22 mm (0.86 in)
- Height: 32 mm (1.25 in)
- Installation Requirements:
- Must be installed by a qualified electrician
- Compliance with national and local electrical codes and regulations
Product Usage Instructions
Installation
- Ensure the device is installed by a qualified electrician following all safety guidelines and regulations.
- Refer to the provided installation manual for detailed step-by-step instructions.
Cleaning and Maintenance
- Do not connect inputs to mains power.
- For cleaning recommendations, refer to the Service Guide provided with the product.
Home Automation System Integration
- When integrating with a home automation system, ensure compliance with IEC 60364 regulations.
- Follow the temperature limits and current-carrying capacities specified in IEC 60364-5-52 for communication wires.
FAQ
- Q: Can I install the device myself?
- A: It is recommended to have the device installed by a qualified electrician to ensure proper installation and compliance with regulations.
- Q: Where can I find more information on cleaning the sensor?
- A: Please refer to the Service Guide provided with the product for detailed cleaning recommendations.
- Q: How should I integrate the sensor with a home automation system?
- A: Ensure compliance with IEC 60364 regulations and follow the specified temperature limits and current-carrying capacities for communication wires as per IEC 60364-5-52.
Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Included And Not Included In Box
Dimension
Installation Instructions
Warning
Wiring
Information
Symbols
Do not connect inputs to mains.
Refer to the Service Guide for full cleaning recommendations.
Installation of a home and building automation and control system shall comply
with IEC 60364 (all parts). The temperature limits and current-carrying
capacities for the communication wires specified in IEC 60364-5-52 shall not
be exceeded
2024 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.