MAGUS CBF10 Digital Camera User Manual
- June 17, 2024
- MAGUS
Table of Contents
MAGUS CBF10 Digital Camera
Product Information
Specifications:
- MAGUS CBF10
- Maximum resolution: 4912×3684 px
- Megapixels: 18
- Sensor: 1/2.3 (6.14×4.61mm) Aptina CMOS
- Light sensitivity: Exposure +
- Video recording: Yes
- Frame rate: 13.1 fps at 4912×3684 px
- Image format: .jpg, .bmp, .png, .tif
- Video format: .wmv, .avi
- Shutter type: ERS
- Output: USB3.0, 5Gb/s
- Body: Metal
- Operating temperature: Not specified
Product Usage Instructions
Camera Installation:
- Install the MAGUSView software on your computer from the USB flash drive (included).
- Connect the camera to your computer using the USB cable.
- Run the MAGUSView software. The camera will be added to the list of connected devices.
- Select the camera to start operation.
The kit includes: MAGUS digital camera, USB cable, USB flash drive with drivers and software, user manual, and warranty card.
System Requirements:
Windows 8/10/11 (32 and 64 bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 2GB RAM, USB 3.0 port.
FAQ
Q: What is the warranty for MAGUS products?
A: Magus optic products carry a 5-year warranty against defects in materials and workmanship. All Magus accessories are guaranteed to be free of defects in materials and workmanship for six months from the purchase date.
Q: Can I use MAGUS digital cameras with all types of microscopes?
A: Yes, MAGUS digital cameras are designed to be used with all types of microscopes: biological, fluorescent, metallurgical, polarizing, and stereoscopic.
Q: What is the maximum resolution of the MAGUS CBF90 camera?
A: The maximum resolution of the MAGUS CBF90 camera is 2448×2048 pixels with 5 megapixels.
Never look at the sun, a bright light source, or laser beam through the camera. It can cause permanent damage to your eyes.
MAGUS digital cameras are designed to be used with all types of microscopes: biological, fluorescent, metallurgical, polarizing, and stereoscopic. The image of the observed object is displayed on a PC screen. The camera software helps you view, save, and edit captured images and video.
CAMERA INSTALLATION
- Install the MAGUSView software on your computer from the USB flash drive (included).
- Connect the camera to your computer using the USB cable.
- Run the MAGUSView software. The camera will be added in the list of connected devices.
- Select the camera to start operation.
SPECIAL FEATURES
- CBF cameras are suitable for the brightfield microscopy technique. This affordable camera is equipped with an Aptina sensor, and the others with SONY Exmor sensors with a backlight.
- There are 5 cameras in the CBF series with resolutions ranging from 3 to 21 MP. The higher the magnification of the objective is, the lower the number of pixels that will be required. The extra pixels will have no effect on the image resolution. When working with objectives with a magnification up to 40x, however, go for a higher resolution camera. Such a camera captures the details better. The 21 MP scientific microscope camera on a 4/3″ sensor works with both high and low magnification objectives.
- The frame rate ranges from 13 to 59 fps at the camera’s maximum resolution. For studying moving objects, choose a camera with a high frame rate.
- The sensor size is an important parameter for professional shooting. A larger sensor size offers several advantages: cleaner image, more hues, and a larger field of view. The CBF series offers cameras with sensor sizes from 1/2″ to 4/3″.
- The larger the pixel is, the more light it collects, which means less image noise and the higher light sensitivity of the camera. The CBF series features cameras with pixel sizes ranging from 1.25×1.25μm to 3.45×3.45μm.
- The camera outputs the image on the screen in real time. The camera’s frame rate is high-speed, allowing you to smoothly adjust the focus when observing with the recommended objective.
- Detailed images with realistic colors are produced when the camera is paired with the right objective.
- The camera is mounted into the vertical tube or a side camera port of the microscope with the C-mount adapter included in the microscope kit. The C-mount adapter (not included) and other adapter rings that match the tube diameter (not included) are used for mounting the camera into the eyepiece. The magnification of the adapter is matched to the size of the camera sensor. The main requirement for adapter optics is to provide a maximum field of view without distortion.
- With the camera software, you can take photos, records video, and edit them. Once calibrated with a calibration slide, the software allows for linear and angular measurements.
- The USB3.0 transfer speed is over 10 times faster than USB2.0. The image is displayed online on the PC monitor. Such speed combined with 30 fps and higher frame rate transmits the image of moving objects without jerks and delays, the focus adjustment is smooth even when working with a 100x objective.
THE KIT INCLUDES
MAGUS digital camera, USB cable, USB flash drive with drivers and software, user manual, and warranty card.
SYSTEM REQUIREMENTS
Windows 8/10/11 (32 and 64 bit), Mac OS X, Linux, up to 2.8GHz Intel Core 2 or higher, minimum 2GB RAM, USB 3.0 port.
SPECIFICATIONS
| MAGUS CBF10 | MAGUS CBF30 | MAGUS CBF50 | MAGUS CBF70 | MAGUS CBF90 | |
|---|---|---|---|---|---|
| Maximum resolution, px |
4912×3684
|
3072×2048
|
2048×1536
|
5280×3954
|
2448×2048
Megapixels| 18| 6.3| 3.1| 21| 5
Sensor
|
1/2.3″ (6.14×4.61mm)
Aptina CMOS
|
1/1.8″ (7.37×4.92mm)
SONY Exmor CMOS
|
1/1.8″ (7.07×5.30mm)
SONY Exmor CMOS
|
4/3″ (17.4×13.0mm)
SONY Exmor CMOS
|
2/3″ (8.45×7.07mm)
SONY Exmor CMOS
Pixel size, µm| 1.25×1.25| 2.4×2.4| 3.45×3.45| 3.3×3.3| 3.45×3.45
Light sensitivity| 0.62V/lux/s| 425mv with 1/30s| 1146mv with 1/30s| 399mv
with 1/30s| 1146mv with 1/30s
Exposure| 0.1ms–2s| 0.02ms–15s| 0.1ms–15s| 0.1ms–15s| 0.1ms–15s
Video recording| +| +| +| +| +
Frame rate, fps at resolution
|
13.1@4912×3684
34.3@2456×1842
54.4@1228×922
|
59@3072×2048
59@1536×1024
|
53@2048×1536
85@1024×768
| 17@5280×3954
17@3952×3952
56@2640×1976
67@1760×1316
192@584×438
|
35@2448×2048
50@1224×1024
Image format| .jpg, .bmp, .png, .tif| .jpg, .bmp, .png, .tif| .jpg,
.bmp, .png, .tif| .jpg, .bmp, .png, .tif| .jpg, .bmp, .png, .tif
Video format| .wmv, .avi| .wmv, .avi| .wmv, .avi| .wmv, .avi| .wmv,
.avi
Shutter type| ERS| ERS| ERS| ERS| ERS
Output| USB3.0, 5Gb/s| USB3.0, 5Gb/s| USB3.0, 5Gb/s| USB3.0, 5Gb/s| USB3.0,
5Gb/s
Body| metal| metal| metal| metal| metal
Operating temperature range, °C|
–10… 50
|
–10… 50
|
–10… 50
|
–10… 50
|
–10… 50
The manufacturer reserves the right to make changes to the product range and specifications without prior notice
CARE AND MAINTENANCE
- Do not disassemble the camera on your own.
- Keep the camera away from moisture; do not use it in rainy weather.
- Keep the camera away from shock or excessive pressure.
- Do not overtighten the locking screws.
- Keep the camera away from hazardous environments, home and car heaters, incandescent lamps or open fire.
- When cleaning the lenses, first blow any dust or debris off the surface or wipe them off with a soft brush. Then wipe the lens with a soft cleaning cloth slightly damp with spirits or ether.
- Seek medical advice immediately if a small part or a battery is swallowed.
MAGUS WARRANTY
Magus optic products carry a 5-year warranty against defects in materials and workmanship. All Magus accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Magus product in any country where a Levenhuk office is located if all the warranty conditions are met.
- For further details, please visit: www.magusmicro.com
- If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch